Our Products
Fibers
1 Products availableFilter Components
1 Products availableDehumidifiers
1 Products availableCooler Parts
1 Products availableAir Handling Unit
1 Products availableIndustrial Air Conditioner & Devices
1 Products availableCable Tray
1 Products availableRepair & Maintenance Services
1 Products availableHVAC System
1 Products availableWe are leaders in the market for providing best range of Air Washer Unit, Single Skin Air Washing Unit, Double Skin Air Washer Unit, Filters for Smelts and Grasses and Automatic Roll System
Evaporating Cooling Units have found their wide application in modern agriculture, e.g., poultry farms, green houses, mushroom farming and also in central air-cooling systems. These 2 in 1 Humidifier & Purifier (Air Washer) washes and humidify the air at low installation, running, operational and maintenance cost. It is on very cost effective equipment in high heat generation areas, easy to operate, handle, maintain, eco-friendly and best for healthy environment.
Application
Advantages
We are leadingCable tray Manufacturer also Supplier and exporters of cable traysas per Client Requirement of Cable trays for various projects, ourcable trays offer quick, easy and economical way of installing power and incrementing cable. We are a Gurgaon(Haryaha), India based companyand are acknowledged for our high qualityCable tray as per set standards. We are not only known in the domestic market but also in the international sphere. Our wide gamut ofcable trays products include Ladder type Cable tray and Perforated Cable tray.
we offer high quality Air Handling Unit to our valuable clients. With a technical specification capacity of 300CFM to 40, 000CFM, our units are appreciated for durability and efficient air handling units. These units are available in single/double skin, with thermal/non thermal break profile single or double tire construction and other configuration
The Air Washers can be applied either in centralized air handling systems or, as a stand-alone unit, in a central station of builderswork. The housing stands clear of the ground on a base frame and consists of stainless steel panels. A pump draws the water directly from the tank. In case of water filtration or of chilled water operation, an additional reservoir is used.The Air Washer is also available, without the stainless steel housing, for installation within existing central stations. Features * Constant and optimum humidification for dew point operation * Variable humidification of the supply air for partial saturation * Possibility of cooling, humidification and dehumidification with chilled water * Housing of stainless steel, other elements, in contact with humidity, made of plastics or of stainless steel * Energy efficient centrifugal pumps * Atomizer nozzle of plastics.
We are one of the leading manufacturers and suppliers of superior quality Single Skin Air Washer. Moreover, these are widely used by our clients in various industrial and household appliances. These can easily be availed by our clients in very reasonable prices.
The air handling unit is an integrated piece of equipment consisting of fans, heating and cooling coils, air-control dampers, filters and silencers. Air Handling Units are often called AHU.The purpose of this equipment is to collect and mix outdoor air with that returning from the building space. The air mixture is then cooled or heated, after which it is discharged into the building space through a duct system made up of five-feet diameter pipes. Air Handler is normally associated with heating/cooling (HVAC) systems in commercial buildings. These are normally very large systems moving 2000 CFM to 10, 000 CFM and higher. They may be mounted on the top of the roof or in large mechanical rooms located in the building. They often have an economizer or inlet damper that allows for a small amount of outside air or make-up air to be pulled in through the air handler.
We offer a wide range of fan coil units. These are made-up with high quality material sourced from our responsible vendors and our coils are available in all sizes and specifications. In addition, we provide customization facility to our entire range of products as per the client's specifications at reasonable prices.
We have in store for our customers a quality range of Double Skin Air Washer. These frameworks comprise 3 D corner joints with extruded aluminum profiles. Well fabricated with high polymer polyester coating from inside and galvanized steel sheet with protection film on top. Moreover, panels of these washer are polyurethane foam injected with desired density and thickness imparting high rigidity and sound attenuation characteristics.
Its main application is its use as filter anti grease and filter for cooker heads. It is composed of polyester fibers impregnated of activated carbon. We offer this filter in standard sizes that can be modified to suit individual needs of our valued customers.
MAIN APPLICATIONS
Filter anti- grease - filter for cooker hoods.
COMPOSITION : Polyester fibers impregnated of activated carbon. | |
Weight | 130 grams/sq.meter |
Thickness | 1,5 mms |
Temperature resistence | 80° C |
STANDARD DIMENSIONS | |
Width | 0,45 -0,47 - 0,50 -0,53 mtrs. |
Length | 250 - 500 meter |
Other sizes on request |
We are offering our activated carbon granule for use as Depurators Unit Installed in Spray Booths. Manufactured with latest process control technology it is very useful in removing dust and other foreign materials. Its configuration can be changed to satisfy individual needs .
Backed with cutting edge technology and highly experienced people, we are engaged in providing pocket filter media which are designed to give excellent output. The use of high grade raw materials make our products best as we never compromise to offer amazing products. These pocket air filters available in the range of SAFPF-m5, SAFPF-m6, AFPF-m7, SAFPF-m8, SAFPF-300 p, SAFPF-130 k, SAFPF-160 k, SAFPF 200s. We are well known pocket filter media manufacturers at economical prices. We also offers pre filter media and fine filter media.
Its main application is in fine filter media for pockets of class G4. Its thickness is 10 mms and weight is 160 grams/sq.meter and can hold dust upto 365 grams/sq.meter. We are offering this technically sound product at very affordable prices.
PRODUCT SPECIFICATIONS | ||
Filter Type | : | SAFPF 160 K |
Main applications | : | fine filter media for pockets in class G4 |
Composition | : | progessively structure media made from polyester thermobonded fibers treatment of reinforce on the air exit side |
Weight | : | 160 grams/sq.meter |
Thickness | : | 10 mms |
Temperature resistance | : | 100º C |
Humidity | : | 100% relative humidity |
Width | : | 0,69 - 0,71 - 1,0 - 2 - 2,05 meter |
Length | : | 40 - 60 meters |
Frontal filtering area | : | 700x700 mms |
Air flow rate | : | 2900 cubic meters/h. |
Initial pressure drop | : | 45 PA |
Final pressure drop | : | 450 PA |
Average atmospheric efficiency E% | : | 90,1 % |
Dust holding capacity | : | 365 grams/sq. Meter |
Filtering | : | G4 DIN 24185 EN 779 ( Eu4) |
Millipore filters with binder resin have superior wet strength and are excellent for collecting over spray in painting booths. Made of glass fibers with BF-240 and comes in thickness of 50 mm - 2" and weight 240 grams/sq.feet. It is especially effective at capturing small, dry paint particles.
PRODUCT SPECIFICATION
Filter Type | : | SAFO 240 GLASS |
Main Applications | : | Filter to collect over spray in painting booths |
Media | : | Glass fibers with synthetic resin sizing , with progressively more dense structure int he direction of air flow - especially dense layer on the air outlet side increases mechanical strength and prevent paint particles from getting through the filter - the air inlet side is colored |
Weight | : | 240 grams/sq.meter |
Thickness | : | 50 mm - 2" |
Width | : | 0.8,1,1.6,2m |
Length | : | 20 / 60 meters |
Air velocity | : | 2,0 mt./s |
Air flow rate | : | 7200 cubic meters/h/sq.meter |
Initial pressure drop | : | 10 PA |
Final pressure drop | : | 50 PA |
Average Arrestance | : | 92% |
Dust holding capacity | : | 3500 grams / sq. meter |
These rolls and pads are manufactured using the highest quality materials available. The filter media consists of Polyester Synthetic Fibers (SAFP 130) produced from 100% high bulk polyester synthetic fibers that are thermobonded with a fire-retardant resin.
PRODUCT SPECIFICATION
Filter Type | : | SAFP 130 |
Main applications | : | Prefilter for air treatment systems |
Composition | : | Thermobonded polyester fibers, progessively structure in the air passage direction |
Weight | : | 130 grams/sq.meter |
Thickness | : | 12 mm |
Temperature resistence | : | 80º C |
Humidity | : | 100% relative humidity |
Air velocity | : | 1.5 meter/second |
Air flow rate | : | 5400 cubic meters/h/sq. meter |
Initial pressure drop | : | 15 PA |
Final pressure drop | : | 250 PA |
Average Arrestance E% | : | 83,4 % |
Filtering Class | : | G3 DIN 24185 EN 779 (EU3) |
These machines, with the air drying technology based on adsorption phenomenon helps in solving humidity problem. The humidity because of high temperature is controlled with the help of inbuilt air conditioning system and chilled water coil. Our Dehumidifiers are appreciated for providing a cool environment in residential and industrial houses. These are demanded in the market for low power consumption and maximum output.
Desiccant Dehumidifiers We are one of the leading manufacturers of Desiccant Dehumidifier. These machines, with the air drying technology based on adsorption phenomenon helps in solving humidity problem.The humidity because of high temperature is controlled with the help of inbuilt air conditioning system and chilled water coil. Our Dehumidifiers are appreciated for providing a cool environment in residential and industrial houses. These are demanded in the market for low power consumption and maximum output.
Application area:
Salient Features:
Our skilled experts are involved in offering automatic roll systems having wide range of industrial usage. These industrial roll systems are durable and reliable as they are made using high grade quality raw materials. We are well known manufacturer and exporter of automatic roll systems making them available at market leading prices.
Glass fibers with synthetic resin sizing, with progressively more dense structure in the direction of air flow. Polyester scrim of reinforce. Possible oiled treatment on the fibers to increase the dust holding capacity. They are available for all industrial ventilation and air conditioning systems such as Farr, Aaf, Trox, Vokes, Ceag, Shirp, Cambridge, Continental, Delbag etc
We are a distinguished manufacturer and supplier of an exclusive range of Air Cleaning Equipment. These are made using best quality raw materials, procured from reliable vendors in the market. We also use latest engineering techniques and advanced methodologies, which results in efficient and durable products. The air cleaning equipment can be customized as per the requirement of the customers. Excellent packaging materials are utilized for safeguarding the products during delivery.
We offer high quality Air Waher Double Skin. These systems are designed and made from fine quality raw materials so as to offer best quality to the clients. They are designed in compliance with the requirements of the clients and manufactured using latest technology machines.
We are a distinguished manufacturer and supplier of an exclusive range of Air Cleaning Equipment. These are made using best quality raw materials, procured from reliable vendors in the market. We also use latest engineering techniques and advanced methodologies, which results in efficient and durable products. The air cleaning equipment can be customized as per the requirement of the customers. Excellent packaging materials are utilized for safeguarding the products during delivery.
We offer high quality Air Waher Single Skin. These systems are designed and made from fine quality raw materials so as to offer best quality to the clients. They are designed in compliance with the requirements of the clients and manufactured using latest technology machines.
We are a distinguished manufacturer and supplier of an exclusive range of Air Cleaning Equipment. These are made using best quality raw materials, procured from reliable vendors in the market. We also use latest engineering techniques and advanced methodologies, which results in efficient and durable products. The air cleaning equipment can be customized as per the requirement of the customers. Excellent packaging materials are utilized for safeguarding the products during delivery.
We offer high quality Cooling Tower Fills Single fold. Water Cooling Tower is used to remove extra heat to the atmosphere using evaporation or naturally existing air. They are also used for cooling the water, which is circulated in various industries like chemical, oil refineries, etc. Our cooling towers are manufactured conforming to the norms of the approved standards. Our cooling towers are highly efficient and durable.
We are a distinguished manufacturer and supplier of an exclusive range of Air Cleaning Equipment. These are made using best quality raw materials, procured from reliable vendors in the market. We also use latest engineering techniques and advanced methodologies, which results in efficient and durable products. The air cleaning equipment can be customized as per the requirement of the customers. Excellent packaging materials are utilized for safeguarding the products during delivery.
We manufacture a wide range of Cellulose pads that keeps the water delivery system in an excellent working condition. Made using innovative technology, these pads utilizes air from the wet pads, which are kept vertical, and allows any moisture to evaporate into the air stream. We use high grade raw materials, which are procured from reliable vendors in the market. Our products are tested for quality and durability. We offer reasonable pricing and customize the products as per requirements. Our cellulose pads are guaranteed delivery within the estimated period.