Post Buy Requirement
SP
Bangalore, Karnataka, India
Add Review

Earthing Electrodes #1545455

Copper Earth Rod

  • Copper Bonding Thickness 254 microns
  • Rod Length in mm 3000
Copper Bonded rod is a best economical solution without compromising quality, Made of low carbon Steel & are atomically coated with copper. Hot Coating Process, Steel provides high strength while copper good conductivity best resistance against corrosion, Due to good conductivity of copper bonded rods these dissipate all leak current to ground, Earth Enhancing Compound - SG GEM PLUS - is filled in the bored hole and become a reason in substantially reducing earth resistance.
View Complete Details

Copper Coated Earth Rods

Copper coated steel grounding rods are made from low carbon Steel & are molecularly coated with 99.9% pure electrolytic copper. This conductor is high strength, excellent elasticity as steel but also good conductivity and corrosion resistance like copper.

In Grounding rods, pure copper atom through molecular structure plated to the steel core. Copper Bonded Rods help in dissipating the leakage current to help any assets being damaged from hazards of the same.

These rods are manufactured according to international standards.

Copper layer is very helpful in extreme soil conditions such as excessive salt / moisture content, where the copper provides superior corrosion resistance and extra ordinary long life

Earth Enhancing Compound is filled in the hole bored for the installation and that assists in substantially lowering the earth resistance and reduce impedance by increasing the contact area of Rod to the soil.

Model Rod Length in mm Rod Diameter in mm Copper Bonding Thickness
SG314 CB 3000 14.2 254 microns
SG514 CB 1500 14.2 254 microns
S317 CB 3000 17.2 254 microns
SG517 CB 1500 17.2 254 microns
SG325 CB 3000 25 254 microns
View Complete Details

Copper Bonded Ground Rods

  • Copper Bonded rods are made of low carbon Steel & are molecularly coated with 99.9% pure copper.This rods have high strength & good conductivity best corrosion resistance.
  • Copper Bonded Rods dissipate all leakage currents to prevent any assets damage.
  • These rods are manufactured to meeting international standards level.
  • Copper layer is supportive in bitter soil conditions as excessive salt / high moisture content.
  • Earth Enhancing Compound - SG GEM PLUS - is filled in the bored hole and become a reason in substantially reducing earth resistance.
  • Most commonly used size is 17.2 mm in copper bonded rods.
  • Though for reference some std sizes have been mentioned in below table but different sizes of copper bonded rods can be provide as per customer needs.

Copper bonded ground rods are best suit as earth solutions as copper has best conductivity and steel core has best strength resulting into enhanced life of earth system.

SG power rods are available in 2m and 3m in 14.2 mm / 17.2 mm/25 mm and have ample ready stock to cater immediate demands of our esteemed customers.

Advantages:

  • Extra Ordinary Long Life
  • Easiest to Install
  • Maintenance - Not required
  • Less Space
  • Consistent Performance over a longer period

Model Rod Length in mm Rod Diameter in mm Copper Bonding Thickness
SG314 CB 3000 14.2 254 microns
SG514 CB 1500 14.2 254 microns
S317 CB 3000 17.2 254 microns
SG517 CB 1500 17.2 254 microns
SG325 CB 3000 25 254 microns
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Earthing Electrodes from Bangalore, Karnataka by sgs power tech
Post Buy Requirement
SP
Add Review

Earthing Electrodes

Leading Manufacturer, Supplier & Retailer of Copper Earth Rod, Copper Coated Earth Rods and copper bonded ground rods.

Copper Earth Rod

  • Copper Bonding Thickness 254 microns
  • Rod Length in mm 3000
Copper Bonded rod is a best economical solution without compromising quality, Made of low carbon Steel & are atomically coated with copper. Hot Coating Process, Steel provides high strength while copper good conductivity best resistance against corrosion, Due to good conductivity of copper bonded rods these dissipate all leak current to ground, Earth Enhancing Compound - SG GEM PLUS - is filled in the bored hole and become a reason in substantially reducing earth resistance.
View Complete Details

Copper Coated Earth Rods

Copper coated steel grounding rods are made from low carbon Steel & are molecularly coated with 99.9% pure electrolytic copper. This conductor is high strength, excellent elasticity as steel but also good conductivity and corrosion resistance like copper.

In Grounding rods, pure copper atom through molecular structure plated to the steel core. Copper Bonded Rods help in dissipating the leakage current to help any assets being damaged from hazards of the same.

These rods are manufactured according to international standards.

Copper layer is very helpful in extreme soil conditions such as excessive salt / moisture content, where the copper provides superior corrosion resistance and extra ordinary long life

Earth Enhancing Compound is filled in the hole bored for the installation and that assists in substantially lowering the earth resistance and reduce impedance by increasing the contact area of Rod to the soil.

Model Rod Length in mm Rod Diameter in mm Copper Bonding Thickness
SG314 CB 3000 14.2 254 microns
SG514 CB 1500 14.2 254 microns
S317 CB 3000 17.2 254 microns
SG517 CB 1500 17.2 254 microns
SG325 CB 3000 25 254 microns
View Complete Details

Copper Bonded Ground Rods

  • Copper Bonded rods are made of low carbon Steel & are molecularly coated with 99.9% pure copper.This rods have high strength & good conductivity best corrosion resistance.
  • Copper Bonded Rods dissipate all leakage currents to prevent any assets damage.
  • These rods are manufactured to meeting international standards level.
  • Copper layer is supportive in bitter soil conditions as excessive salt / high moisture content.
  • Earth Enhancing Compound - SG GEM PLUS - is filled in the bored hole and become a reason in substantially reducing earth resistance.
  • Most commonly used size is 17.2 mm in copper bonded rods.
  • Though for reference some std sizes have been mentioned in below table but different sizes of copper bonded rods can be provide as per customer needs.

Copper bonded ground rods are best suit as earth solutions as copper has best conductivity and steel core has best strength resulting into enhanced life of earth system.

SG power rods are available in 2m and 3m in 14.2 mm / 17.2 mm/25 mm and have ample ready stock to cater immediate demands of our esteemed customers.

Advantages:

  • Extra Ordinary Long Life
  • Easiest to Install
  • Maintenance - Not required
  • Less Space
  • Consistent Performance over a longer period

Model Rod Length in mm Rod Diameter in mm Copper Bonding Thickness
SG314 CB 3000 14.2 254 microns
SG514 CB 1500 14.2 254 microns
S317 CB 3000 17.2 254 microns
SG517 CB 1500 17.2 254 microns
SG325 CB 3000 25 254 microns
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us