We are a prominent Manufacturer and Supplier of Bursting Strength Tester (SGT-G001). The Bursting Strength Tester (SGT-G001) is intended for measuring strength of paperstrong paper board by submitting it to an increasing a uniform hydraulic pressure. The Bursting Strength Tester (SGT-G001) is reliable and designed to produce the result with high accuracy and repeatability by incorporating Electronics Automatic Pressure release system and conforms to international standards BS 3137, ISO 2759, TAPPI T 807 Om-82, T 810 Om-80, etc.

Construction & WorkingPush switch operates horsepower motor, single phase 220250 volts AC and drives the hydraulic system and produce uniform increasing pressure of a rate of 170 mlmin 15 mlmin. The test sample is clamped between two clamping parallel plate manually by tightened the screw, and pressure on the sample is transmitted through Rubber Diaphragm which causes the sample to expand into the upper clamping plate until it burst. After releasing the push switch pressure gets release automatically and optical sensor stops the motor, which is responsible to produce results with high accuracy and repeatability. Pressure gauge is fitted with a maximum reading drag point of sample burst, when the main pointer has return to the zero position.

Specifications

• Pressure increasing speed 170 mlmin 15 mlmin.
• Standard Rubber Diaphragm diameter 76mm2 & 2.3mm 0.2mm thick.
• Range of pressure gauge : 0-7, 0-10, 0-21, 0-28, 0-35, 0-40 kgcm2.

Our company is a chief Manufacturer and Supplier of Digital Bursting Strength Tester. Digital Bursting Strength Tester is intended for measuring strength of paper/strong paper board by submitting it to an increasing a uniform hydraulic pressure. The Digital Bursting Strength Tester is reliable and designed to produce the result with high accuracy and repeatability by incorporating Electronics Automatic Pressure release system and conforms to international standards BS 3137, ISO 2759, TAPPI T 807 Om-82, T 810 Om-80, etc.

Details

• Digital Bursting Strength Tester (Micro-controller Based)
• Model : SGT-G003/A
• For Paper, Paper Board & Corrugated Boxes

Construction & Working

Push switch operates ¼ horsepower motor, single phase 220/250 volts AC and drives the hydraulic system and produce uniform increasing pressure of a rate of 95 ml/min± 5 ml/min. The test sample is clamped between two clamping parallel plate manually by tightened the screw, and pressure on the sample is transmitted through Rubber Diaphragm which causes the sample to expand into the upper clamping plate until it burst. After releasing the push switch pressure gets release automatically and optical sensor stops the motor, which is responsible to produce results with high accuracy and repeatability.

Specifications

• Pressure increasing speed for Paper 95 ml/min ± 5 ml/min Or for Board 175 ml/min ± 5.
• Standard Rubber Diaphragm diameter for board 76 mm2 & 2.3mm ± 0.2mm thick & for paper 50 mm2 & 0.85 ± 0.1 mm thick.

• Range of pressure 0-7 to 0-40 kg/cm2.

We are one of the leading Manufacturers and Suppliers of Tearing Strength Tester. The Tearing Strength Tester is intended for measuring the tearing resistance of paper, films and other sheets from the time tearing off starts till the moment a fixed length is torn off by the loss of potential energy of the fan shaped pendulum. The Tearing Strength Tester is engineered to perfection and conforms to International Standard TAPPI, SCAN and ISO standard.

Details

• Tearing Strength Tester (Elmendorf Type)
• Model : SGT-G018

Specifications

• Tearing resistance tester is easy to operate and has a high accuracy level ± 1% of readout value
• The complete pendulum is easily interchangeable after loosening the curled nut on the bearing shaft and, the whole pendulum assembly can be removed from the stand
• SKF frictionless bearing assemblies are made of stainless steel
• Sample clamp are made of stainless steel. Pivoted knife are made of hardened carbon steel

• Specimen size : 62.0 mm ± 0.2 mm long and 50 mm ± 2 mm width. Scale graduation 0-100
• Interchangeable pendulum having the following capacity
  • Light pendulum : 8000 mN
  • Heavy pendulum : 32000 mN
  • Medium Pendulum : 16000 mN

• Dimensions : Approx. 500 mm x 200 mm x 400 mm
• Net weight of three pendulum tester : Approx. 22 kg

We are engaged in manufacturing and supplying of Box Compression Strength Tester. The Box Compression Strength Tester is designed to measure ability of the container to resist external compression loads during transit and storage. Corrugated and solid fiber board boxes are subjected to compressive forces when stacked and during transportation. It is vital to determine the Compression Strength of the Box in order to make sure that the Box will be able to resist the anticipated compressive forces and to determine the load that the Box will be to withstand during transit and storage. Compression Strength Tester also serves as a useful index of overall quality of the material and workmanship of the Box. The Box Compression Strength Tester is suitable for Testing as per the standards IS 7028 (PART VI)-1973 7028 (PART IX)-1975, TPPI T-8040 om-89 and ASTM D 642-90.

Model : SGT-G015/A

Features

• Force : A precision load cell is used to measure the applied forces and a linear transducer measures the test sample deflection.
  
• Construction : The construction is of “A” frame type.
  
• Crosshead Assembly : Motor driven ball screw, for fast and accurate operation, reposition the crosshead assembly.
  
• Power Pack : The power pack and all the controls are in a separate cabinet, and both are Micro-processor Based.

Salient Features

• Direct Digital Readout of compression strength
• Available in capacities : 0-1000 kgf & 0-2000 kgf
• Peak and hold facility provided
• Testing speed : Minimum 10.5 mm/minute
• Provision of faster speed for approach and return to top of specimen
• Provision for termination of test at pre-selected load

We are a major Manufacturer and Supplier of Digital Brightness Tester. Digital Brightness Tester is intended for measuring the Brightness, Opacity and Gloss of the paper. The Digital Brightness Tester is photoelectric measuring instrument, which conforms to the international standards. Digital readout of the solid state electronic circuit eliminates the possibilities of reading errors and provides high speed operation.

Details

• Digital Brightness Tester (Tappi Standard)
• Photovolt Type
• Model : SGT-G016/A

Specifications

• A digital panel meter for displaying the measured value in percentage.
• Measures Brightness, Opacity and Gloss of paper.
• Brightness search unit measures traditionally reflectance
• 450.00 of paper with white surface backing and deep blue gelatin light filter.
• Opacity search unit measures directional reflectance  450-00  the paper with black body backing and green light filter.
• Gloss search unit measures the gloss of the paper by providing the incident light of 750 on sample paper.
• Quartz-tungsten halogen lamp to provide highly stable light source.
• Measuring accuracy : = .1% Brightness, opacity or gloss.
• Dimension : 290 x 250 mm
• Net weight : 10 kg.

Connection : Power supply 220 +5% volts, one phase 50 Hz 25 Watts.

We are a renowned Manufacturer and Supplier of Ring Crush Tester. The Ring Crush Tester is used to determine the compression strength of a material. With the help of various accessories, the instrument can be used for measuring the compression strength of liner & fluting as well as of corrugated board. The Ring Crush Tester is easy to use. A test piece is placed at the center of the lower platen. When the operators pushes the start button, the lower platen moves upwards according to a preset speed until the test piece is crushed between the upper & lower platens. When this cycle is completed, the lower platen automatically returns to its home position. The maximum measured force exerted during the test is automatically presented on the built in display & value is hold until next Test Start.

Details

• Model : SGT-G030
• You can test from The Ring Crush Tester as RCT, FCT, ECT, CLT, CCT, etc.

Our company is a prominent Manufacturer and Supplier of Tensile Strength Tester. The Tensile Strength Tester is used to measure the tensile strength which is indicative of fiber strength, fiber bonding and fiber length. The Tensile force required to produce a rupture in a strip of paper board, measured in MD & CD expressed in kN/m. Tensile Strength can be used as a potential indicator of resistance to web breaking during printing or converting. The procedure standard explained in TAPPI T-494.

Model : SGT-G017

We are involved in manufacturing and supplying of Folding Endurance Tester. Folding Endurance Tester is intended to determine the Folding Endurance of all kinds of paper card board, foil and film and is applicable to the paper up to 0.15 mm in thickness having a tensile strength greater than 1.3 kn/m. Two test samples can be tested simultaneously. The numbers of folds are stored into the counter, which are stopped counting automatically when the test sample breaks. The Folding Endurance Tester conforms to the SCAN -P17:77 Standard.

Details

• Folding Endurance Tester (Kohler Molin Type)
• Model : SGT-G025