Seven Star Speciality Steel

Sion, Mumbai, Maharashtra

The EN19 Grade Steel Plate that we offer exactly matches the desirable plates of such kinds. It is of the best quality and endowed with high tensile strength. We are working in full throttle to make it available to the length and breadth of the country and abroad. We are one of the eminent Exporters and Suppliers of EN19 Grade Steel Plate from Mumbai, India.

Applications:
EN19T was originally introduced for the use in the machine tool and motor industries for gears, pinions, shafts, spindles and the like. Later its applications became much more extended and it is now widely used in areas such as the oil and gas industries. EN19T is suitable for applications such as gears, bolts, studs and a wide variety of applications where a good quality high tensile steel grade is suited.
Forging :Pre heat carefully, then raise temperature to 850-1200oC for forging. Do not forge below 850oC. After forging cool slowly in still air.

Annealing : Heat the EN19T slowly to 680-700oC. Cool in air.

Hardening :This steel grade is commonly supplied ready heat treated. If further heat treatment is required annealed EN19 should be heated slowly to 860-890oC and after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature.

Tempering :Heat carefully to a suitable temperature selected by reference to a tempering chart or table. Soak at the temperature for 2 hours per 25mm of ruling section, then allow to cool in air. Tempering between 250-375oC is not advised as tempering within this range will reduce the impact value.

Heat Treatment:Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN19T alloy steel.

we seven star speciality steel, is only authorised stockiest of acroni, slovenia for x 12 in india, having experience in this field for more than 20 years and catering to pan india customers including various shot blasting machine mfrs, steel mills, public sector undertakings and many more.

wear resistant materials
warriors acroni, x12, 11- 14 % manganese platewarriors acroni, x12, 11- 14 % manganese is a true hadfield austenitic manganese steel for resistance to severe impact and abrasive wear. It is work hardening steel.work hardening refers to the fact that the steel becomes harder and harder the more it is impacted or compressed.the hadfield grade has an original hardness of approximately 220 brinell. With continued impact and /or compression it will surface harden to over 550 brinell.it should be noted that only the outer skin surface hardens. The under layer remains highly ductile and tough. As the surface wears, it continually renews itself becoming harder and harder.manganese steel is austenitic steel which means it is non-magnetic. This property makes it useful in many applications such as bottom plates for lifting magnets separator drum shells for magnetic materials wear shoes on electric brakes etc

chemcial composition
typical mechanical properties

note: actual field results may vary depending upon the application and overall conditions of use.

advantages
resistance to high abrasion and severe impact
capacity of cold work hardening hardness to 550 bhn
to increase hardness from 200bhn (in as delivered plate) up to an in-service hardness of at least 600bhn.
have non-magnetic properties.
provide maximum wear life.
exceptionally high toughness & ductility.
easy gas cutting & good weld ability

weldox

domex

IMPORTER , STOCKIST, TRADER AND SUPPLIER

Seven Star Speciality Steel is the leading Importer, Stockist, Trader and Supplier of Abrasion Resistant Steel PlateAbrasion resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, attachments to diggers and earth movers and in processing applications in the mining industry.Abrasion Resistant Steel Plate Excellent Abrasion Resistant4 or 5 times stronger than ordinary steelExcellent WorkabilityLarger in elongation. Excellent Weldability Decrease deformation rate Wide range of sizesAvailable in a wide range of sizes.

TheSAIL Hard Steel Plateare wear resistant plates with minimum certified hardness. These plates are required in various wear resistant applications.