Seven Seas Solutions

Vatva, Ahmedabad, Gujarat

Why Tube Settlers?

Tube settlers offer an inexpensive method of upgrading existing water treatment plant clarifiers and sedimentation basins to improve performance. They can also reduce the tankage/footprint required in new installations or improve the performance of existing settling basins by reducing the solids loading on downstream filters.

Made of lightweight PVC, tube settlers can be easily supported with minimal structures that often incorporate the effluent trough supports. They are available in a variety of module sizes and tube lengths to fit any tank geometry, with custom design and engineering offered by the manufacturer.

The advantages of tube settlers can be applied to new or existing clarifiers/basins of any size:

vClarifiers/basins equipped with tube settlers can operate at 2 to 4 times the normal rate of clarifiers/basins without tube settlers.

vIt is possible to cut coagulant dosage by up to half while maintaining a lower influent turbidity to the treatment plant filters.

vLess filter backwashing equates to significant operating cost savings for both water and electricity.

vNew installations using tube settlers can be designed smaller because of increased flow capability.

vFlow of existing water treatment plants can be increased through the addition of tube settlers.

vTube settlers increase allowable flow capacity by expanding settling capacity and increasing the solids removal rate in settling tanks.

Membrane Bioreactor (MBR) systems offer several operational and economic advantages compared to conventional wastewater treatment plants. By incorporating membrane technology, MBR systems eliminate the need for secondary clarifiers and tertiary treatment. This allows for increased performance with a smaller footprint.

Application

Sewage Waste Water

Industrial Waste Water

Food Processing Waste Water

We provide the quality approved range ofFine Bubble Air Diffuserto our valuable clients. While manufacturing the offered air diffuser, our professionals use high grade raw material and superior technology in compliance with the set industry standards. The offered air diffuser is highly appreciated by our clients owing to its simple installation and precise design features. Apart from this, our offered air diffuser is available in various sizes as per precise needs of our clients.

Special Features:

• Increases capacity of clarifier
• Enhances particle agglomeration and growth
• Enhances suspended solids concentration
• Installation is fast and easy

Color And Packaging Available:Black and Poly Bags

DWO DWC

Open Impeller and Close Impeller Motor Driven Centrifugal Pumps in AISI 304

Open-impeller (DWO) and closed impeller (DWC) motor driven centrifugal pumps. DWO pumps are particularly suitable for washing vegetable, meat, fish, shellfish. Suitable for industrial end-of-cycle washing systems, washing and surface fishing systems for metal parts, cans, washing systems for bottle, jars, glass containers, crates, baskets, etc Dishwashers, glass washers, cup washers for communities, hospitals etc., spray booths, and handling, removal and transfer of liquids, including liquid containing solids. DWC pumps are particularly suitable for refrigeration, air-conditioning and heating systems, chillers, washing systems and residential, commercial and industrial water supply.

Technical Specifications

Max. working pressure : 8 bar

Max. liquid temperature : -5oC +90oC (DWO)

-15oC to 90oC (DWC)

+110oC (H-HS-HW version)

Max Size of Solids Handling : 19 mm (only for DWO)

Capacity up to 45 m3/hr (DWC) 3 66 m3/hr (DWO)

Total Head up to 25m (DWC) e17.5m (DWO)

FFS

Firefighting Units Standardized to EN 12845

Fire-Fighting Group attend to EN12485 standards that defines to criteria for designing, installing and servicing fixed automatic and sprinkler fire-fighting system.

FFS Fire-Fighting Groups consist in one main pump (or more pumps work in parallel), coupled to one compensation pump (jockey pump). The main pump feeding can be diesel or electrical according to the EN 12845. The choice of the characteristics of the performances, the number of installed pump and the type (combination electrical-electrical / electrical diesel) has to be managed by the engineer.

Seven Seas Solutions High Purity water Generation Systems are designed and manufactured for treating different types of water developing on its source and quality. These plants are available as pre-engineered packaged standard plants or custom built as per the project requirements.

Important features of Hydropure RO-EDI Plants:

Pre-engineered packaged plants and custom built plants as per URL

The plants can be either chemical or hot water Sanitisable

Complete system CE approval

Complete design with low footprint

Plants manufactured as per ASME, BPE and ISPE Guidelines

Advantages of RO-EDI Plants:

Compact and modular design

Low operating cost

No regeneration and hence no/minimum, chemical consumption

Easy to operate and maintain, maintain, requires practically no maintenance

Very high reliability

Consistent performance in achieving conductivity, microbial and TOC rejection.

Filter Nozzles. These nozzles are used for filtration application in pressure sand filter, carbon filter, softeners etc. These nozzles installed on strainer as plate design and Header lateral system for distribution & collection purpose.

These world class nozzles provide very good flow rate and by which it improves the backwash and filtration efficiency of the plant.

Our distribution & collection system are suitable for any makes of FRP tanks various dia orders from 13 to 79. This system can be used for standard opening 4-threaded and 6 flanged and with only top or top & bottom opening.

Ionpure EDI Modules

The Ionpure EDI modules are specifically designed for industrial applications. Ionpure modules consistently deliver maximum reliability and superior performance for power, HPI/CPI, general electronics, food and beverage and laboratory applications without regeneration downtime.

The EDI modules are the perfect choice for mid-size flowrate CEDI systems (up to 100 gpm (22 m3/h). LX-X modules are used widely in all industries where further polishing of RO permeate water is needed.

In the LX module, the spacers are stacked up in a conventional plate-and-frame arrangement, with alternating product and reject compartments.

Key Features

• No Regeneration Required
• No need of any chemicals
• Low running cost
• None salt sucking system

Description
INDION 225 Na is a high capacity strongly acidic cation exchanger in bead form. It is based on cross linked polystyrene and has a gel structure. The resin contains sulphonic acid functional groups. It is supplied moist in the sodium form.

Applications
INDION 225 Na is used most widely in sodium form for water softening application. It can be used also in two-stage de-ionising as the cation exchanger in the hydrogen cycle.

* - Weight of resin, as supplied, occupying 1 m3 in a unit after backwashing and draining.

PE filter media for pond, fish farming, aquarium, Koi filters and wastewater treatment.

PE filter mediais used in waste water treatment and moving bed biological reactor.

We offer advanced wastewater treatment solutions for the industrial and municipal markets. These solutions significantly increase the capacity and efficiency of existing wastewater treatment plants, while minimizing the size of new plant deployments.

Applications ofPE filter media:

1.All types of industrial and domestic wastewater.

2.Both organic as nitrogen removal.

3.New plants or system upgrades.

4.Limited footprint.

Seven Seas Solutions offers an exhaustive range of Effluent Treatment Plants that is highly efficient. The effluent treatment plant is designed to treat the effluent coming from different areas of the plant. The treatment of different effluents varies with the type of effluent.

Some processes followed by us are:

Aerobic Biological Process

Anaerobic Biological Process

Chemical-physical process

Make - Alfa UV

Features

• High Grade SS304L grade Chambers
• Advanced Power Supply
• Validated by CFD Technology
• Superiore Quality Genuine Quartz
• Capacity - 250 - 10, 000 LPh

Features and Advantages.

• Completely rust and corrosion free.
• Excellent resistance to impact and abrasion.
• Light weight, easy for transportation and installation.
• Smooth, fiber-free inner surface with wide chemical resistance.

Operation Requirement.

• Operating pressure 0.7Mpa
• Operating temperature 49C
• Vacuum 127 mmHg (5" Hg)

IonPure Membranes

High Rejection RO Composite Membrane Elements designed specifically for High Performance in USP and other high purity water systems. Elements with Sanitary, Full-fit outer-wraps eliminate dead flow areas for maximum bacteria control. Components conform to FDA regulation CFR Title 21.

Products.

The convenience and economy of liquid bag filtration is now feasible for filtration applications that previously required other, more expensive systems.

Because demanding or critical applications can be complex, an Seven Seas Solution is available to perform a no-obligation analysis of your process. Learn how one of these high performance filter bags can work in your system, whether your system already exists or is in the design stage.

Hard water is frequently unsuitable for many industrial and domestic purpose. When water is referred to as 'Hard' it simply means, that it contains excess of calcium (Ca) and magnesium (Mg) Ions than normal water.

Carbonate hardness is known as temporary hardness and non-carbonate hardness is known as permanent hardness. The degree of hardness of the water increases, when more calcium and magnesium ions are dissolves. These ions have their origins in limestone sediments and also from carbon dioxide which is present in all waters exposed to the atmosphere and especially in ground water. The easiest way to soft the hard water is through Ion exchange process.

Application .

Apartments / Condominiums

Hospitals

Restaurants

Institutions

Laundries

Boiler Feed Water

Food Processing Plants

Hotels

Office Complexes

Residential Complexes

10" & 20" HOUSING (Big Blue)

• Accept all standard 4" diameter filter nags
• 1" & 1" FNPT Inlet and Outlet
• Operating Pressure - 100 psi
• Operating Temperature - 50oC
• O" Ring bowl to head seal
• All FDA Grade Material
• O Ring - Silicone
• Bowl wrench available

Make HM Digital

NEW! The PH-80 is an economically priced, reliable pH meter that is ideal for testing applications such as hydroponics & gardening, pools & spas, aquariums & reef tanks, water ionizers, drinking water and more.

SPECIFICATIONS

pH Range:0 - 14Temperature Range:1-80 C; 33-176 FResolution:0.1 pH; Temperature resolution is 0.1 C/FAccuracy:+/- 0.2 pH; Temperature accuracy is +/-2%Calibration:Digital automatic calibration (one point)Minimum EC/TDS:10S/5 ppmElectrode:Glass sensor and reference tube electrodesHousing:Water resistantPower source:3 x 1.5V button cell batteries (model LR44 or equivalent; included)Dimensions:15.3 x 3.2 x 1.8 cm (6.0 x 1.3 x 0.7 inches)Weight:53.9 g (1.9 oz)

Make HM Digital

NEW! The PH-80 is an economically priced, reliable pH meter that is ideal for testing applications such as hydroponics & gardening, pools & spas, aquariums & reef tanks, water ionizers, drinking water and more.

SPECIFICATIONS

pH Range:0 - 14Temperature Range:1-80 C; 33-176 FResolution:0.1 pH; Temperature resolution is 0.1 C/FAccuracy:+/- 0.2 pH; Temperature accuracy is +/-2%Calibration:Digital automatic calibration (one point)Minimum EC/TDS:10S/5 ppmElectrode:Glass sensor and reference tube electrodesHousing:Water resistantPower source:3 x 1.5V button cell batteries (model LR44 or equivalent; included)Dimensions:15.3 x 3.2 x 1.8 cm (6.0 x 1.3 x 0.7 inches)Weight:53.9 g (1.9 oz)

Measure the tap water coming in vs. the purified water going out of your water filtration system at any time.

FEATURES

• Displays TDS levels of the feed water and product water with in & out electrode probes.
• Highly efficient and accurate due to its advanced microprocessor technology.
• Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
• Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.)
• Comes equipped with Mur-lokQuick-Connect T-fittings.
• Installs quickly and easily.

SPECIFICATIONS

Range:0-9990 ppm
Accuracy:2%
Conversion Factor:NaCl (avg. 0.5)
Cable Length:24.5" (including sensor)
Fittings:1/4" standard, also available with 3/8" or 1/2"
Power source:2 x 1.5V button cell batteries (LR44 or equivalent; included)
Battery life:approx. 1000 hours of continuous use
Size:7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
Weight:79.4 g (2.8 oz.)

Seven Seas Solutionis a leading provider of filtration solutions, offering a wide variety of technologies that are adaptable and scalable for a broad range of filtration applications. Markets served include medical, pharmaceutical, nuclear, aircraft, process chemicals, commercial printing and various water markets ranging from home drinking water filters to commercial and industrial water treatment systems.Seven Seas Solutionis also offering standard and custom designsthat utilize state-of-the-art filtration media technology.

Technical Specifications:-

• Melt Blown Spun & Wound
• Diameter - 2.5" & 4.0"
• Length -2.5" - 10" 20", 30", 40" 50" & 60" 4.0" - 10" 20"
• Micron Rating 0.5, 1, 5, 10, 20, 50, 100
• Type - Double Open End (DOE)
• Max. Temp - 70oC

Aqua Line Filter Cartridge

v Lower Capital Cost

50% reduction in capital expenditure over typical steel vessels.

Cost saving could more significant when compare to lined vessels or exotic metals.

v vLower Operating Costs

Extended surface media leads to longer element life, which equals fewer change outs.

High tech media, such as polyform and microform, deliver efficiently and performance required.

v Faster Change Outs

Access to Aqualine filtration elements required virtually no tools.

The elements are self guiding during installation and retrieval.

There are no center posts that could cause contamination during change out.

The modular design allows for sequenced change out to eliminate downtime.

vSmaller Equipment Foot Print

Codeline FRP housings are modular, which elements stand alone housing.

They can easily fill in vacant location on and RO skid.

An Aqualine skid can take up far less floor space than a traditional vessel required for the same flow.

Easy, ergonomic design eliminates the needs for heavy support equipment, such as cranes.

vSpecification

Removal Rating 1, 5 & 10

Filter Diameter 17.5 cm

Filter length 102 & 152 cm

Max. Operating Temp. 82oC

Recommended Flow 950 lpm

Max. Flow 1890 lpm

Recommended Change out Differential pressure 2.07 bar

Purolite MZ10 Plus

For removal of iron, manganese and hydrogen sulfide

Purolite MZ10 Plus is a black catalytic media used for removing soluble iron, manganese, hydrogen sulfide, arsenic and radium from water supplies.

Advantages
It can take max iron concentrations up to20 ppm
It can reduce iron, Mn and H2S up to < 0.1 ppm
It has no limitation of 15% dissolved oxidation
It has no limitation of alkalinity and TDS in water
It needs only periodic backwash with treated water
You can easily calculate the OBR of this system
It can be operated at high temperatures and high differential pressures.
It can be operated at high capacity

KEY FEATURES

• Dead end filtration
• Low energy consumption
• Chemically Enhanced Backwash
• Low operating pressure
• Fully automatic operation
• Fully enclosed pressurized system
• Small footprint
• Direct coagulation
• Short retention times
• High removal of organics

• Potable water
  
• Process water
  
• Effluent polishing

Structural Poly Glass Vessels

The ideal pressure vessel for residential and light commercial water softener/filtration applications. Structural Poly Glass Pressure Vessels provide years of reliable service for water conditioning and filtration applications. These slim diameter tanks hold up to 49 gallons of water and offer unmatched strength and chemical resistance.

Features

• Slim diameter with capacities from 2 to 49 gallons
• Unmatched for strength and chemical resistance
• Materials of construction
• Inner shell of polyethylene
• Threaded inlet availablein various sizes

Solo auto MPV can also control your reverse osmosis plant or ultra filtration plant.

• 4 programmable inputs and 4 outputs
• Available in 4 sizes - max 20 m3/hr
• Level controller built in
• Flow rate indicator cum Totalizer built in
• Rs 485 Communication Port Standard
• Operates on 100 to 250 volts
• Controls Dosing pumps as well as Separate backwash pump or Standby pump
• Manual disc assembly is providedas spare

GPE with E-drive

Pressure Booster System with inverter

Booster set with 2 or more pumps, each of them quipped with E-Drive.

E-Drive is an advanced electronic device which combines and INVERTER and a dedicated CONTROLLLER for pumps; it is a compact, robust and reliable system, easy to set-up and use. E-drive represents a compact alternative solution to the classic control penal box, thanks to several control modes, integrated alarms and protections and an advanced menu. The range of booster sets comprises pumping sets with a maximum of 8 pumps in a serial connection (each one operated at variable speed by E-drive), with the possibility of add other 2 pumps directly connected to the mains supply (D.O.L.). The maximum power for each pump is limited to 11kw.

SSS SERIES PIPELIN ROTAMETER.

Seven Seas Solutions fully automatic Filter Presses have revolutionized the fines dewatering process. They are easy to install, integrate and operate, and they provide the most efficient, cost-effective operation in the industry.

Design Features:

Single or double hydraulic ram provides quick, precise mobile plate opening

Remote assistance via an Ethernet connection

High-speed cake discharge system opens plates in groups

Plate shaking system helps to release the cakes

Light curtains help protect operator

Available with High Pressure Shower or One-By-One High-Pressure Wash Systems