Features

• Make - Hanna
• Accuracy - 0.02%

Technical Specifications

• High accuracy at low ranges (below 0.05 NTU)
• Two, three or four point calibration
• USB and RS232 PC connectivity
• Log up to 200 records
• GLP Features
• User friendly, backlit display with guidance codes
• Battery % on startup
• Continuous current time on display

Features

• Make - Hanna
• Accuracy - 0.02%
• Easy and quick installation through jam-in

Technical Specifications

• Measurement range: 0 14 pH
• Resolution - 0.01 pH
• Recorder Output - 4 to 20 mA
• Power Supply - 12 VDC, 115/230 VAC 10%; 50/60Hz

Dimensions - 79 x 49 x 95 mm

Online Conductivity Meter

Model No. CCT-3320T

CCT-3300 seriesconductivity controller / TDS meteris a high-technology innovativeconductivity meterwith good performance and price ratio for inline water quality conductivity analysis.

Range - Conductivity (1.0 1, 999 s/cm) standard 1.0 conductivity sensor

TDS 0, 25 ppm 999.0 ppm, Temprature - 0 50oC

Working environment: 0-50C

Humidity:80%RH

Output:Isolated, transferrable, reversible 4-20mA output,

transmitter model/meter mode

Double contact relay output (ON/OFF)

Power supply:AC220V 50/60HZ (AC110V, DC24V are also available)

Dimension : 48mm96mm80mm(HWD)

Slot dimension: 44mm92mm(HW)

Features

• Make - Create
• Accuracy 1.5%
• Wide measurement range
• Easy and quick installation through jam-in

Technical Specifications

• Measurement range: 0 20, 0 200, 0 2000ppm
• Power supply: AC 220V+10% 50Hz
• Slot dimensions for installation: 45 x 91mm ( height x width)
• Display: Back light 3.5-bit LCD

Output signal: Non-isolated 4-20mA signal output

Make - HM Digital

Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all times!

Specifications

TDS Range:0 - 9990 ppm (mg/L)

Temp. Range:0 - 80 degrees Celsius

Resolution:0-999: 1 ppm; 1000-9990: 10 ppm (indicated by a 'x10' icon)

Temperature Resolution:0.1 degree Celsius (Celsius only)

Accuracy:+/- 2%

EC-to-TDS Conversion Factor:NaCl (avg. 0.5)

ATC:Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit)

Power source:2 x 1.5V button cell batteries (included) (LR44 or equivalent)

Battery life:1000 hours of usage

Dimensions:15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)

Weight with case:76.5g (2.7 oz)

Weight without case:56.7g (2 oz)

Features

• Make - Hanna
• Accuracy - 0.02%

Technical Specifications

• High accuracy at low ranges (below 0.05 NTU)
• Two, three or four point calibration
• USB and RS232 PC connectivity
• Log up to 200 records
• GLP Features
• User friendly, backlit display with guidance codes
• Battery % on startup
• Continuous current time on display

Features

• Make - Hanna
• Accuracy - 0.02%
• Easy and quick installation through jam-in

Technical Specifications

• Measurement range: 0 14 pH
• Resolution - 0.01 pH
• Recorder Output - 4 to 20 mA
• Power Supply - 12 VDC, 115/230 VAC 10%; 50/60Hz

Dimensions - 79 x 49 x 95 mm

Online Conductivity Meter

Model No. CCT-3320T

CCT-3300 seriesconductivity controller / TDS meteris a high-technology innovativeconductivity meterwith good performance and price ratio for inline water quality conductivity analysis.

Range - Conductivity (1.0 1, 999 s/cm) standard 1.0 conductivity sensor

TDS 0, 25 ppm 999.0 ppm, Temprature - 0 50oC

Working environment: 0-50C

Humidity:80%RH

Output:Isolated, transferrable, reversible 4-20mA output,

transmitter model/meter mode

Double contact relay output (ON/OFF)

Power supply:AC220V 50/60HZ (AC110V, DC24V are also available)

Dimension : 48mm96mm80mm(HWD)

Slot dimension: 44mm92mm(HW)

Features

• Make - Create
• Accuracy 1.5%
• Wide measurement range
• Easy and quick installation through jam-in

Technical Specifications

• Measurement range: 0 20, 0 200, 0 2000ppm
• Power supply: AC 220V+10% 50Hz
• Slot dimensions for installation: 45 x 91mm ( height x width)
• Display: Back light 3.5-bit LCD

Output signal: Non-isolated 4-20mA signal output

Make - HM Digital

Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all times!

Specifications

TDS Range:0 - 9990 ppm (mg/L)

Temp. Range:0 - 80 degrees Celsius

Resolution:0-999: 1 ppm; 1000-9990: 10 ppm (indicated by a 'x10' icon)

Temperature Resolution:0.1 degree Celsius (Celsius only)

Accuracy:+/- 2%

EC-to-TDS Conversion Factor:NaCl (avg. 0.5)

ATC:Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit)

Power source:2 x 1.5V button cell batteries (included) (LR44 or equivalent)

Battery life:1000 hours of usage

Dimensions:15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)

Weight with case:76.5g (2.7 oz)

Weight without case:56.7g (2 oz)