We Offer Digital Slave Clock provide large display of time in hours minutes and seconds. They are synchronized to the central controller by the time broadcast received on a RS 485 serial port. The Slave clocks have a built in high stability crystal oscillator provided for back up in case of absence of serial communication.The display is Seven Segment LED display of 4 height, the brightness of which is controllable. Provided key board for setting for Free running and direct setting of clock.The power supply for the clock is derived from the Mains supply. ( 240 V AC.) FeatureTime Synchronization with Master or GPS (in standalone mode).Time Display in HH:MM:SS, (HH:MM).Display Seven Segment Red (4 & 2 Digit, any other please specify).Signal Driving Distance 1.2 Km through twisted pair Communication cable used for RS485 link.Multiple Slave Clock connectivity, extended slave clock drive.Stand-alone Network mode.Remote setting for time Manual Time set through Remote Control (Optional).Ceiling Wall mounting.Operating Voltage 230 VAC, 50 Hz.

The current Switch that We Deal in Monitors Loads in the Systems of Building Automation. the Current Switch Senses the Current for Monitoring the Power Condition. the System Lights to Indicate Closed Switch with Led. with Easy Adjustments, the Current Switch is Popular Amidst the Clients. featuresinput / Output Isolation Via Current Transformertrue Digital Switching and No Leakagecompact Sizesolid-state Reliabilityself-powered and No Insertion Losseasy Field Adjustment with Status Led'ssolid, Reliable Mounting Methodspecificationsinsulation Class : 600vresponse Time: < 200 Ms Temp. Rating -25 to 60 C ( 0 to 150 F)wiring Connections : split Core - Screw Terminals (14 to 22 Awg)hysteresis : < 2% Fs Maxoperating Temperature : 0 to 70 C (32 to 160 F) Power Supply None-self-poweredset Point Range : 1. 5-200 for Sp Modelsjumper Amp-turns : low (none) 1-10, Medium 10-50

The simulator Synchroscope that We Offer is Ideal for Synchronizing the Generator with Grid Placed in Simulator. We Receive Repeated Orders for the Simulator Synchroscope We Bring Forth as It is Composed in a Very Precise Manner. Also, We are One of the Renowned Manufacturers and Suppliers of Simulator Synchroscope. composed Ofone Eight Bit Digital to Analog Converter (dac)stepper Motorthree Reflector Sensorspower Supply (240vac, 50hz)bridge Rectifierfilterstep Down Transformerlinear Regulatorsa Voltage to Frequency (vf) Converter8 Bit Micro-controllertwo Analog Multiplexersfour Driver Amplifierstechnical Specificationsstepper Motor to Drive the Synchroscope Facia of Suitable Torque, Voltage & Current.four Inputs to the Driver Unit ( 0 or 24vdc), direction Control (0v= Clockwise 24vdc = Anticlockwise).start Stop of Stepper Motor(0vdc = Stop 24vdc = Start).0-10 Rpm 0-200 Rpm(0vdc = 0-10 Rpm 24vdc = 0-200 Rpm).accuracy = 0.2rpm for 0-10rpm & 2rpm for 0-200rpm.power On Power Off (0vdc = Power On 24v Dc = Power Off)three Outputs (potential Free) Indicating the Position of the Pointer On Either Sides of 120 Clock Position Within a Band of 600.indicates the Position of the Pointer Within 00 to 300, (contact Closed = Pointer Within 00 to 300 Position contact Open = Pointer Within 00 to 3300 Position).indicates the Position of the Pointer Within 00 to +300, (contact Closed = Pointer Within 00 to +300 Positiocontact Open = Pointer Within 300 to 3600 Position).potential Free Contact for Sensing the Position of the Pointer At 12o Clock Position.accuracy of Potential Free Contacts = 20.one Analog Input Signal (0 -10vdc) for Driving the Synchroscope Needle At Various Speeds in Start and Various Positions in Stop.provision for Positioning the Pointer At 60 Clock Position, after Mains 240vac Power is Switched Offinputs At 0 Levelfollowing Connectors are Provided for External Connections, three Pin Allied Connector for 240vac Supplyone 15 Pin D-type Connector for 3 Inputs and 3 Potential Free Outputsone 9 Pin D-type Connector for One Analog Input (0-10vdc)test Points are Given for Checking the Healthiness of the Unitauxiliary Supply : 240vac, 10%, 50hzinsulation Resistance of Greater Than 100 Mega Ohms Between all Points and Chassisvoltage Proof Rating Will Be 1.5kv Between Ac Supply Line and Chassis.environmental and Operating Conditions :normal Operating Conditions-temperature : 20 550 C, Relative Humidity : 5 -95 %

Offered By Us is dc Earth Leakage Relay that Works By Measuring Differential Current Between Both the ve and +ve Current Carrying Conductors. the Dc Earth Leakage Relay Provided By Us is Supplied to Far Flung Areas of the World Through the Wide Spread Network of the Company. used For localizing and Detecting Earth Leakages in Dc Power Systems specifications sensor: back Panel Mountable with An Opening Provided for Passing the -ve and +ve Conductors Through. Size of Opening is 50 Mm Dia (smaller Dia Sensors are also Available )detectorsensing Range : + - 5 1020 Ma Selectable By Shorting Terminals On the Unit indication : +ve Leak, -ve Leaktime Delay : 10 Seconds for Turn On and Turn Offauxiliary Supply : 20 to 80 V, or 80 to 300 V Acdctrip Output : 1 Changeover Contact On Leakage Exceeding Set Valuecontact Rating 5 a 230v Ac 30 V Dcreset : auto or Manual Selectable By Shorting Terminals On the Unitmanual reset Button Provided On the Unit dimensionssensor : 113mm X 30mm X 105mm ( 50mm Opening ), 87.5mm X 26mm X 81mm (20 Mm Opening )detector Unit : 70 Mm X 100 Mm X 110 Mmaccessories : cable Between Detector and Sensor of 2 Metre Length

The gps Based Clock that We Bring Firth is Used in Process Industries, Power Plants, Airports, all India Radio, Railway Stations, Doordarshan, Etc. for Synchronizing Time Data. the Gps Based Clock Can also Work Efficiently in the Absence of Satellite Signals By Using Rtc as Well as Oven Controlled Crystal Oscillator. specificationmaster Clock Gps (optional Stand Alone Ocxo Based Unit)membrane Keypad for Configuration of Contactmultiple Slave Clock Drive Up to 1.2 Kmgps Time Synchronization to Pc, Lan Network (optional), Slave Clocks, Etcalarm Facility operating Voltage - 230 Vac, 50 Hzrs 232c, Rs485, Tcpip (optional) Interfacebuilt in Real Time Clockpotential Free Contact Output Pulse (1pps, 1ppm, 1pph, 1ppd)time Date Display (lcd)op Selection, Periodicity, Pulse Width - Local Time Setled Indication of Status (gps Healthy Modes of Operations Etc.)back Up Time Using High Accuracy (0.1, 1ppm) Oscillatorsdimension: 483mm X 355mm X 560mmdigital Slave Clockremote Setting for Time Manual Time Set Through Remote Control (optional)ceiling Wall Mountingtime Synchronization with Master or Gps (in Standalone Mode)stand-alone Network Modeoperating Voltage - 230 Vac, 50 Hzsignal Driving Distance 1.2 Km Through Twisted Pair Communication Cable Used for Rs485 Linktime Display in Hh:mm:ss, (hh:mm)display Seven Segment Red (4" & 2" Digit, Any other Please Specify)multiple Slave Clock Connectivity, Extended Slave Clock Drive

We Offer Humidity & Temperature Indicator.HTI-01 is a unit, which provides an integrated measurement solution for HVAC control systems. The unit interfaces directly with a humidity sensor and temperature input provides local indication of Humidity & Temperature.FeatureInput 1 : 0-10V DC Humidity sensor proportional to 0 to 100% RH. Impedance > 100 Kilo ohm.Input 2 : 0-10V DC Temperature sensor. Range 0 to 50oC.Display : Two separate display for indicating Humidity andTemperature.Resolution : 0.17 Rh & 0.1oC.Accuracy : 1.0%.Auxiliary Supply: 24V AC or 240V AC, 3VA max.Dimension: 120mm x 210mm x 50mm

We Offer Digital Slave Clock provide large display of time in hours minutes and seconds. They are synchronized to the central controller by the time broadcast received on a RS 485 serial port. The Slave clocks have a built in high stability crystal oscillator provided for back up in case of absence of serial communication.The display is Seven Segment LED display of 4 height, the brightness of which is controllable. Provided key board for setting for Free running and direct setting of clock.The power supply for the clock is derived from the Mains supply. ( 240 V AC.) FeatureTime Synchronization with Master or GPS (in standalone mode).Time Display in HH:MM:SS, (HH:MM).Display Seven Segment Red (4 & 2 Digit, any other please specify).Signal Driving Distance 1.2 Km through twisted pair Communication cable used for RS485 link.Multiple Slave Clock connectivity, extended slave clock drive.Stand-alone Network mode.Remote setting for time Manual Time set through Remote Control (Optional).Ceiling Wall mounting.Operating Voltage 230 VAC, 50 Hz.

We have Available with Us Digital Panel Meter Using Which One Can Easily Measure Basic Ac and Dc Electrical Parameters. the Digital Panel Meter is User Friendly in Nature and Has a Huge Demand all Across the Globe. Besides, the Digital Panel Meter is Used in Various Substations and I Industries. range Coveredammeterenergy Meterfrequency Metervoltmeterpower Meterspecificationsdisplay : 4 1/2 Digits or 3 1/2 Digits Seven Segment Led Displaymeasurements voltage : Ac / Dcrange : 500v7300v/200v/20v/2vcurrent :ac / Dcrange : 10a/5a/2a/1a/0.1aisolation1.5 Kv / 1 Minute Between Line, Neutral & Earth500v Ac / 1 Minute Between Inputs & Earthinsulation Resistance At 500v Dc > 100 Between Above Terminalsv. Aux. Supply : 24v Dc / 48v Dc / 100-300v Dc / 85-265v Acspeed : 4800 / 9600 /19200 / 38400 Bps.size : 96 X 48 X 85 Mm Environmentaccuracy : +0.5% of Fsd.rs 485 : Mod Bus Rtu Protocol.communication : rs-485 ( 2 Wire )operating Temp : 0 55c

We Offer Battery Charge Monitor BCM-01 is a micro controller based unit, which is used for monitoring the charge level of stationary battery systems. This unit measures the voltage drop across a shunt through which the battery is connected to the charger and the load. The unit displays the charge remaining on the battery in terms of Ampere- Hour (AH) capacity as well as remaining time for which the battery can supply rated current. The unit incorporates precision analog and digital circuits and has the following features Feature A settable low charge alarmDisplay of the charge on the battery as AH andRemaining time for complete discharge.Field Setting of the Rated battery capacity in AH.Field setting of the shunt rating.Remote Indication of fully charged Battery condition.Soft calibration no trimpots.Optional- RS 485 Modbus link for PC connectivity.Optional Ethernet connectivity for networking.Operates directly from the battery being monitored.User friendly LCD display messages.Field setting of Battery efficiency.

The current Switch that We Deal in Monitors Loads in the Systems of Building Automation. the Current Switch Senses the Current for Monitoring the Power Condition. the System Lights to Indicate Closed Switch with Led. with Easy Adjustments, the Current Switch is Popular Amidst the Clients. featuresinput / Output Isolation Via Current Transformertrue Digital Switching and No Leakagecompact Sizesolid-state Reliabilityself-powered and No Insertion Losseasy Field Adjustment with Status Led'ssolid, Reliable Mounting Methodspecificationsinsulation Class : 600vresponse Time: < 200 Ms Temp. Rating -25 to 60 C ( 0 to 150 F)wiring Connections : split Core - Screw Terminals (14 to 22 Awg)hysteresis : < 2% Fs Maxoperating Temperature : 0 to 70 C (32 to 160 F) Power Supply None-self-poweredset Point Range : 1. 5-200 for Sp Modelsjumper Amp-turns : low (none) 1-10, Medium 10-50

The simulator Synchroscope that We Offer is Ideal for Synchronizing the Generator with Grid Placed in Simulator. We Receive Repeated Orders for the Simulator Synchroscope We Bring Forth as It is Composed in a Very Precise Manner. Also, We are One of the Renowned Manufacturers and Suppliers of Simulator Synchroscope. composed Ofone Eight Bit Digital to Analog Converter (dac)stepper Motorthree Reflector Sensorspower Supply (240vac, 50hz)bridge Rectifierfilterstep Down Transformerlinear Regulatorsa Voltage to Frequency (vf) Converter8 Bit Micro-controllertwo Analog Multiplexersfour Driver Amplifierstechnical Specificationsstepper Motor to Drive the Synchroscope Facia of Suitable Torque, Voltage & Current.four Inputs to the Driver Unit ( 0 or 24vdc), direction Control (0v= Clockwise 24vdc = Anticlockwise).start Stop of Stepper Motor(0vdc = Stop 24vdc = Start).0-10 Rpm 0-200 Rpm(0vdc = 0-10 Rpm 24vdc = 0-200 Rpm).accuracy = 0.2rpm for 0-10rpm & 2rpm for 0-200rpm.power On Power Off (0vdc = Power On 24v Dc = Power Off)three Outputs (potential Free) Indicating the Position of the Pointer On Either Sides of 120 Clock Position Within a Band of 600.indicates the Position of the Pointer Within 00 to 300, (contact Closed = Pointer Within 00 to 300 Position contact Open = Pointer Within 00 to 3300 Position).indicates the Position of the Pointer Within 00 to +300, (contact Closed = Pointer Within 00 to +300 Positiocontact Open = Pointer Within 300 to 3600 Position).potential Free Contact for Sensing the Position of the Pointer At 12o Clock Position.accuracy of Potential Free Contacts = 20.one Analog Input Signal (0 -10vdc) for Driving the Synchroscope Needle At Various Speeds in Start and Various Positions in Stop.provision for Positioning the Pointer At 60 Clock Position, after Mains 240vac Power is Switched Offinputs At 0 Levelfollowing Connectors are Provided for External Connections, three Pin Allied Connector for 240vac Supplyone 15 Pin D-type Connector for 3 Inputs and 3 Potential Free Outputsone 9 Pin D-type Connector for One Analog Input (0-10vdc)test Points are Given for Checking the Healthiness of the Unitauxiliary Supply : 240vac, 10%, 50hzinsulation Resistance of Greater Than 100 Mega Ohms Between all Points and Chassisvoltage Proof Rating Will Be 1.5kv Between Ac Supply Line and Chassis.environmental and Operating Conditions :normal Operating Conditions-temperature : 20 550 C, Relative Humidity : 5 -95 %

The dc Energy Meter provided By Us is Used for Measuring Electrical Energy Consumed By Multiple Loads that are Connected to D.c. Voltage Source. Furthermore, the Dc Energy Meter is Ideal for Measuring the Drop of Voltage Across Current Shunt, Input Voltage and Observing Current, Voltage, Kw & Kwh with the Usage of Push Button Switches. features 7 Digit Lcd Display of Kwhuser Selectable Shunt Ratingreset of Kwh for Every Channel Protected By Passwordindividual Channel Can Be Enabled or Disabledshunt Can Be Placed Either in +ve or -ve Side of the Dc Power Sourceenergy Values & Settings Retained After Power Failureremote Monitoring of Parametersdisplay of Dc Current, Voltage, Power (kw) & Kwhr for 7 Channelssoft Calibration No Trimpotsoptional Real Time Clockoperates from Battery Being Monitored (optionally It Can Be Operated from a Different Auxiliary Power Supply)optional- Rs 485 Modbus Link for Pc Connectivitydata On Modbus Protocol Can Be in integer Format or Ieee 754user Friendly Lcd Display Messagestechnical Specificationselectrical input Voltage : nominal Voltage Range12v (10 to 19v), 24v (20 to 38v)48v (40 to 76v), 96v (80 to 152v)110v (90 To175v), 220v (180 to 350v)input Current : nominal Shunt Value 75mv (50 to 100)operating Range 5mv to 100mvauxiliary Supply : same as Input Voltage or Optionally Any Voltage Noted in the Voltage Range Abovemeasurement : 7 Channel Dc Kwhraccuracy : +/- 1% (10 % to 120 % of Range)resolution : 0.1 Kwhrindication display : 16 X 2 Character Backlit Lcd Character Size 2.95 X 4.35mmdisplay Parameter (four Channels)kwhr -xxxxxx.xcurrent- Xxx.xpower ( Kw) -xx.xvoltage -xx.xconfigurable Parametersshunt Rating- 75 Mv = 10 to 1000 Ampbaud Rate -9600 to 19200device/ Unit Address -01 to 255calibration for Each Channel and Reset of Energy Count Provided with Password Protectionprotection : Reverse Input Polarity Protectionisolation between Aux-supply and Electronics: 500 V Dc for 1minbetween Current (shunt) and Input Dc Potential: 500 V C for 1 Mincommunication rs 485 2 Wire Communicationprotocol Modbus Rtu Integer, or Ieee 754baud Rate : Settable Either 9600 or 19200address : Settable 01 to 255data Retention: Energy Values and Settings Retained After Power Failurecalibration: Soft Calibration Through Softwarereal Time Clock (rtc) : Optionalpower Consumption : < 2 Wattsecurity password for Editing of Settingspassword for Calibrationenvironmental normal Operating Conditions. Temperature: Operating Temperature: 10 C to 55 C relative Humidity: 55% to 85%.dimensions housing : Plastic or Metal Housing 96 X 96 X 65 Mm (cut Out 92 X 92 Mm)

Offered By Us is dc Earth Leakage Relay that Works By Measuring Differential Current Between Both the ve and +ve Current Carrying Conductors. the Dc Earth Leakage Relay Provided By Us is Supplied to Far Flung Areas of the World Through the Wide Spread Network of the Company. used For localizing and Detecting Earth Leakages in Dc Power Systems specifications sensor: back Panel Mountable with An Opening Provided for Passing the -ve and +ve Conductors Through. Size of Opening is 50 Mm Dia (smaller Dia Sensors are also Available )detectorsensing Range : + - 5 1020 Ma Selectable By Shorting Terminals On the Unit indication : +ve Leak, -ve Leaktime Delay : 10 Seconds for Turn On and Turn Offauxiliary Supply : 20 to 80 V, or 80 to 300 V Acdctrip Output : 1 Changeover Contact On Leakage Exceeding Set Valuecontact Rating 5 a 230v Ac 30 V Dcreset : auto or Manual Selectable By Shorting Terminals On the Unitmanual reset Button Provided On the Unit dimensionssensor : 113mm X 30mm X 105mm ( 50mm Opening ), 87.5mm X 26mm X 81mm (20 Mm Opening )detector Unit : 70 Mm X 100 Mm X 110 Mmaccessories : cable Between Detector and Sensor of 2 Metre Length

The gps Based Clock that We Bring Firth is Used in Process Industries, Power Plants, Airports, all India Radio, Railway Stations, Doordarshan, Etc. for Synchronizing Time Data. the Gps Based Clock Can also Work Efficiently in the Absence of Satellite Signals By Using Rtc as Well as Oven Controlled Crystal Oscillator. specificationmaster Clock Gps (optional Stand Alone Ocxo Based Unit)membrane Keypad for Configuration of Contactmultiple Slave Clock Drive Up to 1.2 Kmgps Time Synchronization to Pc, Lan Network (optional), Slave Clocks, Etcalarm Facility operating Voltage - 230 Vac, 50 Hzrs 232c, Rs485, Tcpip (optional) Interfacebuilt in Real Time Clockpotential Free Contact Output Pulse (1pps, 1ppm, 1pph, 1ppd)time Date Display (lcd)op Selection, Periodicity, Pulse Width - Local Time Setled Indication of Status (gps Healthy Modes of Operations Etc.)back Up Time Using High Accuracy (0.1, 1ppm) Oscillatorsdimension: 483mm X 355mm X 560mmdigital Slave Clockremote Setting for Time Manual Time Set Through Remote Control (optional)ceiling Wall Mountingtime Synchronization with Master or Gps (in Standalone Mode)stand-alone Network Modeoperating Voltage - 230 Vac, 50 Hzsignal Driving Distance 1.2 Km Through Twisted Pair Communication Cable Used for Rs485 Linktime Display in Hh:mm:ss, (hh:mm)display Seven Segment Red (4" & 2" Digit, Any other Please Specify)multiple Slave Clock Connectivity, Extended Slave Clock Drive

We Offer Humidity & Temperature Indicator.HTI-01 is a unit, which provides an integrated measurement solution for HVAC control systems. The unit interfaces directly with a humidity sensor and temperature input provides local indication of Humidity & Temperature.FeatureInput 1 : 0-10V DC Humidity sensor proportional to 0 to 100% RH. Impedance > 100 Kilo ohm.Input 2 : 0-10V DC Temperature sensor. Range 0 to 50oC.Display : Two separate display for indicating Humidity andTemperature.Resolution : 0.17 Rh & 0.1oC.Accuracy : 1.0%.Auxiliary Supply: 24V AC or 240V AC, 3VA max.Dimension: 120mm x 210mm x 50mm