Power distribution unit is fitted with multiple outputs designed to distribute electrical power. In a data centre, all the distributed power loads are connected through a non linear power source, due to which HARMONICS generation is unavoidable.These generated Harmonics are flow back and directly effects the mains power source, which a UPS. The effect of harmonics derates the capacity of UPS. Hence 100% utilization of UPS capacity becomes wasted. The effect of harmonics also creates much heat in the transformers of UPS. To eliminate these direct effects on UPS, KFactor Transformers are designed based on the harmonics present the load. The special design of K-Factor Transformer helps us to depend on much to eliminate or withstanding from the effects of Harmonics.

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage. Technical Specifications Input Voltage Range : 300 – 460V 340 – 480V 360 – 460V AC 3 Ph Output Voltage (3 Ph) : 415V AC System : Unbalanced 4 wire: R Y B N Connections : Star Operating Frequency : 47 to 53 Hz Output Voltage Adjustable : 380 to 415V AC in 3 Ph Output Voltage Regulation : + 1% (No Load) Output Voltage Regulation : + 1% (Full Load) Overload Capacity : 120%

Our clients are most concerned about power issues such as power failure, power sag, power surge, under voltage or over voltage, frequency variation, harmonic distortion and line noise. Servomax emphasizes the areas of redundant power supply, voltage regulation, equipment protection and adjustment. Their power range, applications and the equipment they protect are listed below:

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage. Technical Specifications Input Voltage Range : 300 – 460V 340 – 480V 360 – 460V AC 3 Ph Output Voltage (3 Ph) : 415V AC System : Unbalanced 4 wire: R Y B N Connections : Star Operating Frequency : 47 to 53 Hz Output Voltage Adjustable : 380 to 415V AC in 3 Ph

With Very High Speed of Correction provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage.

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage. Features ; Individual Phase control By pass provision Suitable for individual phase applications Quick response time 10 milli sec (half a cycle) Very high efficiency above 98% Excellent regulation as high as +- 0.5% “Micro controller” controlled system

Power distribution unit is fitted with multiple outputs designed to distribute electrical power. In a data centre, all the distributed power loads are connected through a non linear power source, due to which HARMONICS generation is unavoidable.These generated Harmonics are flow back and directly effects the mains power source, which a UPS. The effect of harmonics derates the capacity of UPS. Hence 100% utilization of UPS capacity becomes wasted. The effect of harmonics also creates much heat in the transformers of UPS. To eliminate these direct effects on UPS, KFactor Transformers are designed based on the harmonics present the load. The special design of K-Factor Transformer helps us to depend on much to eliminate or withstanding from the effects of Harmonics.

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage. Technical Specifications Input Voltage Range : 300 – 460V 340 – 480V 360 – 460V AC 3 Ph Output Voltage (3 Ph) : 415V AC System : Unbalanced 4 wire: R Y B N Connections : Star Operating Frequency : 47 to 53 Hz Output Voltage Adjustable : 380 to 415V AC in 3 Ph Output Voltage Regulation : + 1% (No Load) Output Voltage Regulation : + 1% (Full Load) Overload Capacity : 120%

Our clients are most concerned about power issues such as power failure, power sag, power surge, under voltage or over voltage, frequency variation, harmonic distortion and line noise. Servomax emphasizes the areas of redundant power supply, voltage regulation, equipment protection and adjustment. Their power range, applications and the equipment they protect are listed below:

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage. Technical Specifications Input Voltage Range : 300 – 460V 340 – 480V 360 – 460V AC 3 Ph Output Voltage (3 Ph) : 415V AC System : Unbalanced 4 wire: R Y B N Connections : Star Operating Frequency : 47 to 53 Hz Output Voltage Adjustable : 380 to 415V AC in 3 Ph

With Very High Speed of Correction provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage.

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage. Features ; Individual Phase control By pass provision Suitable for individual phase applications Quick response time 10 milli sec (half a cycle) Very high efficiency above 98% Excellent regulation as high as +- 0.5% “Micro controller” controlled system