Post Buy Requirement

Voltage Stabilizer

We are leaders in the market for providing best range of Static Voltage Stabilizer, Servo Stabilizer, Residential Servo Stabilizer, Linear Automatic Voltage Stabilizer and Servo Controlled Voltage Stabilizer

Static Voltage Stabilizer

  • Input Voltage Range 300 - 460V / 340 - 480V / 360 - 460V AC 3 Ph
  • Output Voltage (3 Ph) 415V AC
  • Operating Freequency 47 - 53 Hz
With Very High Speed of Correction provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage.
 
View Complete Details

Servo Stabilizer

  • Input Voltage Range 170-270V AC, 50 Hz
  • Output Voltage 230V AC 50 Hz 1Phase
  • Operating Frequency 47 to 53 Hz
  • Output regulation ± 1%
  • Correction Speed 35V/sec
  • Line regulation ± 1%
  • Load regulation ± 1%
  • Wave-form distortion Nill
  • Power factor effect Nill
  • Output wave -form True reproduction of Input
  • Type of cooling Natural Air-cooled
  • System Construction As per IS:9815
  • Efficiency 98.5%
  • Response Time 10 milli sec.
  • Servo Motor Drive rugged ac step synchronous motor
  • Enclosure IP32
  • with Relay / Contactor
    • High voltage protection
    • Low voltage protection
  • with MCB
    • Overload protection
    • Short circuit protection
View Complete Details

Residential Servo Stabilizer

  • Input Voltage Range 300 - 460V / 340 - 480V / 360 - 460V AC 3 Ph
  • Output Voltage (3 Ph) 415V AC

Provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage.

Programmable Parameters

  • Output voltage set ( 210-245V)
  • Output Low Voltage Cutoff
  • Input High on LCD Display
  • Sensitivity / Regulation
  • Over Load Cutoff
  • CT full scale
  • Output High Voltage Cutoff
  • Input Low on LCD Display
View Complete Details

Linear Automatic Voltage Stabilizer

  • Frequency 47-53Hz
  • Input Voltage Range 3 6 0 - 4 6 0 V, 340-480V, 3 4 0 - 4 6 0 V, 3 2 0 - 4 6 0 V & 360-480 V
  • Efficiency (approx) 99.5%, 99%, 98.7%, 98.5%
  • Output Voltage 400 V ± 1%, 3-Phase, 50 Hz
  • Cooling Naturally / Oil Cooled
  • Regulation ± 1.0% from no load to full load
  • Temperature Rise 400 C above ambient
  • Mounting On Uni-directional Wheels
  • Corrections Rate 1 2 - 2 0 V / Sec ( U p t o 5 0 0 K VA ) a n d 8-12 V/Sec (Above 500 KVA)
  • Wave form distortion Virtually Nil
  • Duty Cycle 100% Continuous

Servo Voltage Stabilizers come in a wide range of models. The standard 3-phase models are suitable for balanced & unbalanced supply/loads.

Most Suitable for

  • Cement Plants
  • Air Ports
  • Rolling Plants
  • Flour Mills
  • Engineering Units
  • Cell Phone Networks
  • Rice Mills
  • Pharmaceutical Units
  • Cold Storage
View Complete Details

Servo Controlled Voltage Stabilizer

  • Operating Frequency 47 to 53 Hz
  • Correction Rate 60 / 30 / 25V per Sec-3 Phase
  • Input Voltage Range 300 - 460V / 340 - 480V / 360 - 460V AC 3 Ph
  • Output Voltage (3 Ph) 415V AC
  • System Unbalanced 4 wire: R Y B N
  • Connections Star
  • Output Voltage Adjustable 380 to 415V AC in 3 Ph
  • Output Voltage Regulation + 1% (No Load)
  • Output Voltage Regulation + 1% (Full Load)
  • Overload Capacity 120.00%
  • Waveform Distortion Nil
  • Output Waveform True Reproduction of Input
  • Insulation Class F
  • Short Circuit period & Percentage 300% for 250 Milli Sec.
  • Normal Operation Temperature 0° C to 45° C
  • Climate Conditions 90% Rh Max. Non Condensing at 350C
  • Type of Cooling Natural air cooled up to 600 KVA
  • Mode of system Fully Automatic
  • System Construction As per IS : 9815 – 1994

provides perfectly stable output even under severe conditions of unbalanced voltage conditions. Ideal to protect the electrical and electronic equipments from high and low voltage.

View Complete Details

Air Cooled Servo Stabilizers

Servo Stabilizers are used to protect any critical equipment, which are effected by the fluctuation in the input supply and those equipments do not operate when they are not used at the specified voltage. Our Servo Stabilizers by providing constant output with tolerance of 1% makes equipments operate efficiently and hence improve their life. Also protect from being damaged due to high and low voltage fluctuations.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us