The apparatus will be able to bend the sample backward and forward in a direction perpendicular to the plane of the conductors, the two extreme positions making an angle of 90 on both sides of the vertical.Rate of flexing will be 60 per minute. A flexing is a movement through 180.A weight having mass of 0.5 kg will be provided with suitable grips for hanging to the sample.The apparatus will have a provision for fixing the sample of tinsel cord (Flat) in the apparatus.A 6 Digit reset able type counter with battery back-up (rechargeable) for retaining the information in case of power failure up to 72 hours will be provided for counting each flexing cycle.The standard motors used in the apparatus.The apparatus will be able to operate on single phase 230 V, 50 Hz. AC supply.

Technical Specifications

SIZE: As per requirement.TEMPERATURE RANGE: (-) 40 Deg. C.TEMPERATURE UNIFORMITY: +/- 1 Deg. C.TEMPERATURE ACCURACY: +/- 1 Deg. CCONTROL SYSTEM : PID (WITH PROGRAMMER)

TEST CHAMBER DIMENSIONS: AS PER REQUIREMENTThe chamber is made of noncorrosive material. 100 lid to avoid falling of condensation on the item under test. There will be a water channel on the top of the chamber in which the top lid will rest there avoiding leakage of salt fumes, if any. The chamber will be floor mounting type with casters for portability. Spray nozzle :Spray nozzle, GLASS Instrumentation :Solid-state digital temperature indicator controller with PT 100 as temp. Sensor will be provided for Indication and control of dry and wet bulb temp. SSR output controlled will be PID Controllers.

Unjointed Finger Probe

This Probe is made for forceful insertion where the flexibility of the Jointed Finger Probe would be an obstruction. The handle is designed with a threaded hole for use with force gauges.To verify protection of persons against access to hazardous live parts of hazardous mechanical parts, these are used.

Ball Accessibility Probe with Handle

The 50 mm. Impact Ball with Handle is used to test as per IEC 60529 Standard for protection against access to hazardous parts. Ball is made of chrome-plated hardened steel, and the rest is made of polyamide. It is for impact and access testing.

Test Pin Probe, 15 mm. Long

The Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of stainless steel with an insulated handle as per IEC 60950 and 61032 Standards.

Test Rod Probes

The ball on all models is 35mm in diameter. All probe gauges are used for measuring the protection against access to hazardous parts. The rod is made of stainless steel and the stop face and handle are made of plolyamide. Handles are threaded to accept a force gauge.

Unregulated Power Source

An Unregulated power source with current limiting circuit, Digital Voltmeter and fault indicator to be used with few test probes as per the standards test requirements

Driving Rain Test)The chamber is made as perJIS-D 0203-1976and IS 9000 : Part 16.The chamber is made of stainless steel. It consists 8 water shower heads. The test chamber will be capable of spraying water under laboratory as per IS: 9000: XVI from 8 shower heads. It will be possible to direct the spray from 4 of these shower heads downwards, at an angle of 45, at each of the four uppermost corners of the item under test and from the remaining 4 shower heads, horizontally at the center of the area of each of the four sides of the item. The distance between the shower heads as per IS: 9000: XVI from the corners of sides of the item. SPRAY NOZZLE: BRASSFLOW CONTROL THROUGH HIGH PRESSURE PUMPSAMPLE HOLDER: ROTATING TABLE

The apparatus will be able to bend the sample backward and forward in a direction perpendicular to the plane of the conductors, the two extreme positions making an angle of 90 on both sides of the vertical.Rate of flexing will be 60 per minute. A flexing is a movement through 180.A weight having mass of 0.5 kg will be provided with suitable grips for hanging to the sample.The apparatus will have a provision for fixing the sample of tinsel cord (Flat) in the apparatus.A 6 Digit reset able type counter with battery back-up (rechargeable) for retaining the information in case of power failure up to 72 hours will be provided for counting each flexing cycle.The standard motors used in the apparatus.The apparatus will be able to operate on single phase 230 V, 50 Hz. AC supply.

Technical Specifications

SIZE: As per requirement.TEMPERATURE RANGE: (-) 40 Deg. C.TEMPERATURE UNIFORMITY: +/- 1 Deg. C.TEMPERATURE ACCURACY: +/- 1 Deg. CCONTROL SYSTEM : PID (WITH PROGRAMMER)

TEST CHAMBER DIMENSIONS: AS PER REQUIREMENTThe chamber is made of noncorrosive material. 100 lid to avoid falling of condensation on the item under test. There will be a water channel on the top of the chamber in which the top lid will rest there avoiding leakage of salt fumes, if any. The chamber will be floor mounting type with casters for portability. Spray nozzle :Spray nozzle, GLASS Instrumentation :Solid-state digital temperature indicator controller with PT 100 as temp. Sensor will be provided for Indication and control of dry and wet bulb temp. SSR output controlled will be PID Controllers.

Unjointed Finger Probe

This Probe is made for forceful insertion where the flexibility of the Jointed Finger Probe would be an obstruction. The handle is designed with a threaded hole for use with force gauges.To verify protection of persons against access to hazardous live parts of hazardous mechanical parts, these are used.

Ball Accessibility Probe with Handle

The 50 mm. Impact Ball with Handle is used to test as per IEC 60529 Standard for protection against access to hazardous parts. Ball is made of chrome-plated hardened steel, and the rest is made of polyamide. It is for impact and access testing.

Test Pin Probe, 15 mm. Long

The Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of stainless steel with an insulated handle as per IEC 60950 and 61032 Standards.

Test Rod Probes

The ball on all models is 35mm in diameter. All probe gauges are used for measuring the protection against access to hazardous parts. The rod is made of stainless steel and the stop face and handle are made of plolyamide. Handles are threaded to accept a force gauge.

Unregulated Power Source

An Unregulated power source with current limiting circuit, Digital Voltmeter and fault indicator to be used with few test probes as per the standards test requirements

Driving Rain Test)The chamber is made as perJIS-D 0203-1976and IS 9000 : Part 16.The chamber is made of stainless steel. It consists 8 water shower heads. The test chamber will be capable of spraying water under laboratory as per IS: 9000: XVI from 8 shower heads. It will be possible to direct the spray from 4 of these shower heads downwards, at an angle of 45, at each of the four uppermost corners of the item under test and from the remaining 4 shower heads, horizontally at the center of the area of each of the four sides of the item. The distance between the shower heads as per IS: 9000: XVI from the corners of sides of the item. SPRAY NOZZLE: BRASSFLOW CONTROL THROUGH HIGH PRESSURE PUMPSAMPLE HOLDER: ROTATING TABLE