Senior Packaging Machinery Mfg. Co.

G.T. Road, Amritsar, Punjab

the machine has flute rolls which are the main part of this machine. These are very minutely finished to give the perfect impression on the board. Motorized self loading twin shaft reel stand with three unwinding shafts helps in easy operation saving time. Electric heaters are fitted to provide lamination of board which help to increase the efficiency and production.

Purpose and Characteristics:
The sturcture is double rotary shafts with four arms;Support two paper mill rolls on both arms at the same time.
Hydraulic control for paper mill roller up-down, clamp-open and centering.
Web tension is controlled by pneumatic brake or manual brake; Springiness chucks are optional.
Effective width:900mm-2550mm;Maximum paper roll diameter:f1500mm.
Maximum support weight:3T.
Main axis: diameter 242mm

Purpose and Characteristics:
320S Design Speed: 120m/min
360S Design Speed: 150m/min
Effective width: 1400mm-2500mm
Corrugated roller:f320(f360)mm
Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. adopt gimbal transmission. separate power.(optional)
Corrugating roller, pressure roller and glue roller by pneumatic adjustment.
Cardboard transmit adopt vacuum suction method, with wind control system. keep flute profiles stable of the lower-roller in the condition of running up.
Bearing of corrugated and pressure roller adopt high temperature lubricate grease.
Glue parts auto supply glue circularly.
The upper-lower corrugating roller are made of 48CrMo high quality alloy steel, after heat-treatment. The hardness HRC58-60, the surface be grinded.
The glue part surface are treated by special mesh snicked and chromeplated.
Motorized or manual glue width dividing to match the paper width.
Glue part can be running independently or non-independently while stopped.

TechnicalSpecifications

Diameter of pre-heater roller:f600mm, f800mm, f900mm, f1100mm available discretionarily.
Expiry width: 1400mm-2200mm
Electromotion adjust the dimension of per-heater. And the range of adjustment: 60270
Each roller surface are treated with exactitude milling and plating rigid chrome, glabrous and durable.
Adopt butterfly seal or plat design. Insure reel paper is heated averagely.
Can be collocated in monolayer or mulriple.

• Main Structure and Features
• Diameter of pre-heater roller: 600mm, 900mm, 1000mm, 1100mm
• Effective width : 1400mm-2500mm
• Electro motion heating angle adjustment. adjustable range of 360
• Surface of all rollers are well treated by grind and plated hard chrome, glabrous and durable.
• Adopt dishing seal or plat design. Insure reel paper be heated averagely.
• Simplex, duplex, triplex or quad plex preheater according to requirement.

Design Speed:180m/min
Expiry width:1400mm-2200mm
Adopt adsorption and strain tighten set, sep up adsorption strain adjusment set, assure stick hard and level off while the cardboard transit heating plank.
Electric control install two groups of operation plate, upper and lower bridge can be adjusted arbitrarily.
Adopt in-phase electric drive, equiop high, low speed paper stacking set, realize the purpose of transmitting restored single facer corrugated cardboard.

Vacuum device made of steel plate, structure with chrome-plated treatment, with powerful vacuum pump.
With vacuum brake system, control the air volume egulationg corrugated.
With electrical adjustment and reduce motor to guide the web edges and let alignment.

Design speed:200m/min
Special line on the surface of the glue applicator roller, surface ane hard chrome palting, even glue supply, low cost.
The glue applicator drived by frequency conversion motor with inverter. Keep the synchronization for glue applicator roller and double baker facer machine by inverter. And independent running.
Adjustment for gap between glue roller and doctor roller by electric or manual are optional, Digital read out for the gap between glue roll and doctor roll is optional.
Press roll moves up and down by pneumatic. Gap mini-adjustment by electric.
Self-circulating glue supplying system to avoid glue hardenning and to control glue quantity Keeping the glue good quality and saving.
Press roll and press bar are optional.

Heating plate is surface grinded and chrome-plated.Dense weight rollers be used in heating section, 3-stage adjustable pressure for weight rollers are controlled by pneumatic system according to thickness of paperboard.(optional)Tension contorl for upper cotton belt by pneumatic cylinder .Automatic or manual correcting device are optional.Drive section adopt gear box, drived by electromagnetic speed control motor or frequency conversion motor.Driver rollers be covered endure abrasion rubber, and cutting "V"form teeth, with drum and put out paperboard stable.

Woodwind Rolls are minutely completed and mounted on circular Roller Bearings, to give idealize impact on Board. The setting of Flute Roll is from one side as it were. A Motor is fitted to keep the Gum Rolls Rotation for tumult of the gum while the gum Unit is withdrawn from the Flute Rolls. A steam shower is accommodated idealize development of the flutes. Mechanized self Loading Reel Stand is also furnished with machine. The Machine is furnished with Centralized Lubrication System.

Function and characteristics :

Feeding department :It adopt the combination chain-paper feeding style, ensure paper feeding steady, reduce the rate of spoiled products,

Printing department :

• Adopt computer-digit phase controller, input the digit adjustment phase directly, adjust quickly and precisely.
• Auto rise the ink plate , the inker turning to prevent ink dried
• Adopt electrically separation, pneumatic locking and pneumatic brake.
• Ink supply by pneumatic diaphragm pump.
• Main transmission gear made by 45# steel, it adopting helical gear driving and processed by high frequency quenching. Auto sprinkle lubricating system, ensure the machine precise and use life.

This machine suit for folding and glue all the kind of paperboard, Easy operation, no training is necessary. One minute quick order change. Carton glue min size 260mm. It is the best choice for carton making factory.

Technical Specifications

Automatic gluer consist of three part which is feeding paper part, glue folding part and counting piling part, adjust the speed by digital, micro-adjust the phase by computer, double frequency convertor synchronous operation, with simple quick reliable and precise controlling style, automatic feeding paper, automatic gluing and folding, automatic counting, automatic piling and outputting, average sticking speed is 150m/min, max speed 220m/min. High efficiency, save energy, environmental is our top pursuit.

Automatic feeding bottom paper, front pushing face paper, it has easy shortcut for feeding paper, lower work intensity. Front orientation bottom paper never leading, suit jointing of paperboard to paperboard, paperboard toA, B, C, D, E style corrugating cardboard. Jointing of bottom paper to face paper can fore-and-aft adjustment, easy opposite joint. Feeding glue system are automatic control by liquid relay, thickness of sub o adjust equality glue, lower glue cost. Electric machine adopt non polar shift, electromagnetism clutch adopt without touch point relay, journey position adopt photo electricity switch detect, electron automatic count and empty sheet photo electricity automatic control.

• One minute quick order change.
• Easy operation, no training is necessary.
• Single, double supplement stitching are available.
• Automatic counter ejector.
• Touch screen operate
• Uses the server
• Nail spain:100mm
• 400nail/minute
• Stitching whatever the carton have cover or not
• Nail span can set up directly in the touch screen

This machine can be operated in alignment of corrugating machine instead of rewinding and making roll of single phase. It will avoid the labour of 2 to 3 persons to cut on board cutter. The machine is attached with A.C. Drive motor with PLC controller .with digital size setting. Moreover the machine is provided with variable speed drive to align the corrugation. It can cut the paper into 2 to 3 Nos. at a time from paper reels with no variances.

Fluterolls and pressure rolls are pneumatically adjusted with gum circulation tank. The Machine has flute rolls which are the main part of this machine. There are very minutely finishedgive the perfect impression on the board. Motorized self-loading twin shaft reel stand with three unwinding shafts helps in easy operation saving time. Electric heaters are fitted to provide lamination of board which helps to increase the efficiency and production.

Flute rolls and pressure rolls are pneumatically adjusted with gum circulation tank. Flute rolls are minutely finished and mounted on spherical Roller Bearings, to give perfect impression on board. The setting of Flute Roll is fame one side only. A Motor is fitted to keep the Gum Rolls Rotation for agitation of the gum while the gum unit is disengaged from the Flute Rolls. A steam shower is provided for perfect formation of the flutes. Motorized self-Loading reel stand is additionally provided with machine. The machine is provided with Centralized Lubrication system

This machine can be operated in alignment of corrugating machine instead of rewinding and making roll of single phase. It will avoid the labour of 2 to 3 persons to cut on board cutter. The machine is attached with A.C. Drive motor with PLC controller .with digital size setting. Moreover the machine is provided with variable speed drive to align the corrugation. It can cut the paper into 2 to 3 Nos. at a time from paper reels with no variances.

This machine can be operated in alignment of corrugating machine instead of rewinding and making roll of single phase. It will avoid the labour of 2 to 3 persons to cut on board cutter. The machine is attached with A.C. Drive motor with PLC controller .with digital size setting. Moreover the machine is provided with variable speed drive to align the corrugation. It can cut the paper into 2 to 3 Nos. at a time from paper reels with no variances.

Sheet Pressing Machine is used for pressing of Corrugated Sheets. The glued sheets which are processed on pasting machine are piled on lower plate and then pressure is applied for some time by lowering upper moving plate.

Pasting Machine is useful for gluing the fluted side of the board and for pasting board to paper as well as to board for making 3-5-7 ply board. The model of this machine is different than the others and is full enclosed model. The Machine is adjustable by rotating handle provided on one side of machine.

Slotting and corner cutting is done simultaneously over this machine. It is capable of slotting a number of sheets in one stroke. The distance between two slots and slots depth is adjustable. Two guides are provided for facilitating east feeding and correct dimensions.

Flexo Printer is designed to help corrugated box manufacturers to keep pace with the demand for sharp and excellent printing on corrugated boxes. Incorporating the latest technology, Single Colour Flexo Printing Machines prints better and dries aster resulting in increased production.

The transfer of image is accomplished through Rubber / Nylon / Photo polymer Stereo of 2. 8 mm / 4. 7 mm thickness, using liquid water - based or thinner - based inks. For Printing Kraft paper and corrugated boards. Only our machine can print both the paper and corrugated boards. Distinct and precise impression, instant drying, extremely simple to operate, easy accessibility for cleaning. For Forprinting Kraft paper &corrugated boards Distinct & precise impression, instant drying, extremely simple to operate, Easy accessibility for cleaning. Single Color Flexo Printing Machine mainly use in Cardboards and Corrugated box.

This equipment provides 2 Colour Printing. High precision anilox roll is fixed. Single sheet manual feeding is there. Ideal for printing on Kraft paper & Corrugated Board. Uniform spreading and controlled flow of ink.

(A) Anilox Roller & Rubber Roller
(B) Stainless Steel Ink Tray
(C) 5 H.P. Motor
(D) With Variable Speed A.C. Drive
(E) With Oil Lubricant Pump
(F) With Canvas Belt
(G) Make of Bearings NTN / SKF / NBC
With all Standard Accessories Complete

- Impression Adjustment through two capricious shrubs

- Electro Magnetic Clutch and Brake to dispense with plausibility of time slack between driving and breaking

- Dual Timing Device to give a variable period from half to ten seconds

- Two Safety Devices to stop the moving square instantly and segregate the beginning component

- Standard Accessories: One Impression Plate, Two Steel Chases, Feed and conveyance sheets, Centralized oil framework and apparatuses.

Performance of the main mechanisms :

• Designed According the high request and the reliable function, the operation of the machine is humanization, can accomplish the setting, revision, implement, replacing and memories function in a shot time, and display with a exact data.
• All the drive rollers adopted high quality steel materials, hard chromium plating and the surface treated by lapping finish.
• The drive gears adopt high quality alloy steel, after heat treatment and lapping finish.
• The main drive roller adopt keyless connect, decrease the connection gap, guarantee the printing presicion.
• Lubricate oil automatic balance device, keep the equal oil level equal in each unit.
• The machine adopt PLC control, with utomatic zero return and emories function.
• Use sun feeder for feed the cardboard.
• Customer can chose use steel anilox roller or ceramic roller, the lines of the anilox roller ac so can be chosed accord the customer use

• One minute quick order change.
• Easy operation, no training is necessary.
• Single, double supplement stitching are available.
• Automatic counter ejector.
• Touch screen operate
• Uses the server
• Nail spain:100mm
• 400nail/minute
• Stitching whatever the carton have cover or not
• Nail span can set up directly in the touch screen

Character :

• Slitting Part: adopt high quality tungsten steel blade, sharp and long work life, slice more tidy, non pressing and non-burr.
• Scoring part: adopt 5 points scoring, scoring distance in phase adjust, blazonry and easy to bend the carton sheet.
• Grinding Part: adopt automatic and manual two kinds pneumatic grinding type, it could be grinding when working, improve work efficiency.
• Electric control lift-down and correct error, easy to operate, suit for different requirements.
• Adopt Chin a famous brand or imported electric element, dependable performance.
• Adopt synchronous belt drive, low noisy and work steady.
• It could be adopt double machine type, easy and fast change cutting order.
• Max running speed for production line: 150m/min.
• Adopt front-scoring feeding, back double rubber roll leading paper, paper board running steady.
• Slitting Part: adopt high quality tungsten steel blade sharp and long work-life, slice more tidy, non-pressing and non-burr.
• Scoring Part: adopt 5 points scoring, scoring distance in-phase adjust, blazonry and easy to bend the carton sheet.
• Grinding Part: adopt automatic and manual two kinds pneumatic grinding type, it could be grinding when working, improve work efficiency.
• Electric control lift-down and correct error, easy to operate, suit for different requirements.
• Adopt China famous brand or imported electric element, Dependable performance.

• Die cutter phase is adjusted by computer and electric digital control In a scopeof 360,
• Die cutter horizontal movement is adjusted by computer and electric digital control of a scope of 5mm.
• Uniflair glue die cutting cushion roller servo traces simultaneously, when the restored roller is input inside the serveo computer system, it will calculate accurately and automatically and follow the printing speed to ensure the velocity of blade line the same as the cushion roller and make the formation of the die cutting beautiful and same in size. No matter how the diameter of the cushion changes, the die cutting plate will not be damaged. The upper and lower roller of the die cutting adopts the design of different sizes.
• The servo system ensures the automatic deviation of the cushion and cutting die for every circle, which greatly lengthen the service life of the cushion; in addition, the renovated cushion can be used for many times and greatly reduce the cost.
• The cushion roller's mechanical, horizontal and cam facility moves horizontally in a scope of 35mm to lengthen the Using life of the die cutting cushion.
• The light alloy aluminium back-kick vacuum adsorption feeding system with several groups of rolling bearing to ensure stable running.
• Left and right baffle and back baffle positions are under the computer and electric and digital control as the side baffle is equipped with pneumatic trimming facilities.
• Cosecutive or skip paper feeding goes with the inarared electrophonic counter.
• Imported controlling system along with Siemens low voltage electric appliance and host frequency conversion control realized the electricity saving about 30%

Features & Stack Units

• This machine is exclusive equipment for die cutting and molding, suitable for themanufacturing of coloful cartons, boxes and other package products of abnormal shape.
• It adopts the double roller pressing and urethane soft template; die cutting apeed difference servo makes up the linear velocity automatically, once completing the paperboard and the siding, slotting, punching, creasing and folding of the corrugated paper of medium and small thickness.
• The machine adopts the vacuum adsorption feeding facility; the main machine adjusts the speed by electromagnetism and the die cutting phase by computer, featuring high precision of die cutting, high speed and convenient operation.

• Board size adjustment using screw adjustment mechanism, one person operation, easy and quick.
• Easily adjustable paper code sets to better adapt to all kinds of cardboard and feed stable and accurate.
• Feed using high-quality rubber belt seamless belt, friction, long life, low noise, easy maintenance, high economic efficiency.
• Dual tension control, convenient and reliable.
• Pattern roller shaft used to increase friction with the feeding belt to ensure smooth high-speed board transport.
• The machine has a magnetic clutch brake mechanism.
• The machine adopts PLC automatic electrical process control, high degree of automation.
• Inverter-driven motor, to achieve stable running speed.
• PLC control optical signal through the electromagnetic clutch brake, to achieve synchronization with the host.