Delhi, India
Our Products
SEEMSAN Moulded Polypropylene High Capacity Pumps are specially designed and developed for high capacity and high head application.
|
| Model | Suction in mm |
Delivery in mm |
IMP in mm |
HP | RPM | Head in M Cap in m3/hr |
|||||
| AKRON-220L | 50 | 50 | 220 | 3 | 1450 | 17.5/00 | 16/20 | 14/28 | 12/38 | 10/40 | 08/45 |
| AKRON-220H | 50 | 50 | 210 | 15 | 2900 | 63/00 | 60/18 | 55/30 | 50/50 | 45/58 | 40/60 |
| AKRON-230 | 75 | 40 | 170 | 20 | 2900 | 38/00 | 35/25 | 33/45 | 30/60 | 28/80 | 25/80 |
| AKRON-265 | 100 | 80 | 265 | 25 | 1440 | 25/00 | 23/23 | 24/38 | 23/70 | 22/105 | 21/125 |
| AKRON-320 | 150 | 100 | 320 | 60 | 1440 | 36/00 | 35/60 | 34/170 | 30/230 | 32/310 | 30/340 |
| AKRON-360 | ON REQUEST | -/- | -/- | -/- | -/- | -/- | -/- | ||||
These Pumps are recommended for
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model | Suction in mm | Delivery in mm | IMP(mm) | HP | RPM | Head (m) V/S Capacity (m) | |||||
| ALTRA-180 | 40 | 40 | 195 | 2 | 1440 | 12/00 | 11/06 | 10/10 | 09/16 | 08/22 | 07/24 |
| ALTRA - 200 | 75 | 40 | 205 | 3 | 1440 | 14/00 | 13/10 | 12/15 | 11/23 | 10/28 | 09/30 |
| ALTRA - 210 | 75 | 50 | 205 | 5 | 1440 | 16/00 | 14/20 | 12/30 | 10/36 | 09/42 | 08/44 |
SALIENT FEATURES:
Full Port
Blow Our Proof Stem
Low Torque
Floating Ball
Mirror Finish Ball
Quarter Turn Shut Off
100% Interchangeability
Variety of Material of:
S.S.ASTM, A 351, GR CF8 (304), CF3 (304L), CF 8M (316), CF3M (316L), CF8C (321)
CN7M (ALLOY 20)
ASTM 216, GR WCB (CAST STEEL)
| APPLICATION STANDARDS | |
| Mfg. Std.-BS 5351 Testing Std. -BS 5146 Product Range -15 to 50 mm End Connection -BSP Female End / BSPT / NPT / BSP Female Ends | |
| CLASS | BODY | SEAT |
| 150 lbs | 450 PSIG or 31.5 Kg/cm²g | 315 PSIG or 22 Kg/cm²g |
| 300 lbs | 1100 PSIG or 77 Kg/cm²g | 800 PSIG or 56 Kg/cm²g |
Tower packings is available in Polypropylene, PVDF & HDPEmaterial of construction in various types ( like Hackette, Tellerette, Dinpak & Envipac) and sizes.
Tower Packings find wide applications in wet scrubbers, cooling towers, entertainment separators, absorption & stripping columns and air-washers. They are uniquely designed to increase mass transfer & process capacity; to reduce pressure drops, energy consumption & hence operating costs.
Tower Packings are an ideal replacement for the existing ring or saddle packings to increase throughput, improve efficiency and conserve energy.
| ADVANTAGES |
| High mass and/or heat transfer rate Extremely low pressure drop Free of plugging , fouling, nesting & wall channeling Highest flooding point & lowest wetting point Even gas and liquid distribution. No Interlocking or meshing. Better particulate collection by inertial impaction Greater liquid surface availability. More interstital hold-up points Renews liquid surface at no extra cost in energy Continuous exposure of fresh liquid surface to gas flow Non wetting surface High column stability Higher absorption efficiency enables to conserve energy Used as mist eliminator also Reduces energy consumption & hence operating cost |
Moulded PP Basket Strainers are available with choice of Elastomer Liners like Neoprene, Nitrile, Hypalon depending on application
Excellent for handling acidic effluent.
Sizes Available :3" (75 mm), 4" (100 mm), 6" (15mm), 8" (200mm)
Test Pressure :7.5 kg/cm3
Temperature :upto 65C
For various hazardous, toxic and corrosive gases like HCL, Cl2, SO2, NH3, H2S etc., dust particulates and various solvent vapours.
For large surface area wetted by a liquid over which the gas stream flows, wet packed scrubbers are used to absorb pollutant solute from the gas stream.
Customised packages available for removal & recovery of different gases and recovery of solvents and by-products.
Fabricated from various thermoplastic, thermoset and composite materials
Equipment designed in various sizes as per various international standards
Extensively used for storing/processing various toxic, hazardous & corrosive chemicals
Expertise available in designing complete acid handling systems with minimum pressure drop required.
For measuring corrosive fluid line pressure with accurate readings from 0 to 10 kg/cm2
This engineered, all plastic Pressure Gauge Saver consists of a moulded cylinder incorporating a top and bottom chamber. It is an effective means of eliminating the corrosion problem and the necessity for utilizing a costly high alloy gauge in the measuring of line pressure in pipes carrying corrosive chemicals.
| WORKING |
| A moulded flexible diaphragm incorporating double "O" rings separates the top and bottom chambers and provides for positive sealing as well as complete isolation of the corrosive fluids to the inert materials. The top chamber is filled through a 1/4" BSP threaded hole, with any compatible fluid such as water or oil. This liquid simply serves to the hydraulically transfer line pressure. A pressuregauge indicator, of the user's choice, is then threaded onto the 1/4" BSP Connection. In thelower chamber a 1/2" BSP thread ( or other pipe size) inlet is provided and when connected to the pressure line, provides the required channel for the fluid to enter and activate the flexible diaphragm, and a true and accurate reading ( to 10kg/cm2) will be recorded on the pressure gauge. This action also has the effect of dampening line pulsations, surges and shocks which are normally imparted to an indicator not protected with a Guage Saver. The moulded flexible diaphragm is Neoprene. Polypropylene is rated forkg/cm2 service. Polypropylene is suitable upto 85C. |
For Processing industries
Made of Fibreglass reinforced plastics, Engineering plastics and composite materials as per customer's needs
Volumetric flow rates upto 1, 00, 000 m/ hr and static pressures upto 600 mm WC.
For special applications and extreme operating conditions special designs can be developed.POL
Air-operated double diaphragm pumps can move anything from fine chemicals (gentle, non-shearing action), to abrasive and viscous slurries (no close-fitting parts, low internal velocities), and almost any other product that can move.
Versatile Performance
Air Operated Double Diaphragm Pumps
| POLYPROPYLENE | AOD - 20 | AOD - 25 | AOD - 50 |
| HEIGHT : (in mm) | 410 | 635 | 787 |
| WIDTH : (in mm) | 215 | 406 | 483 |
| DEPTH :(in mm) | 280 | 304 | 368 |
| WEIGHT : (in kg.) | 9.5 | 18 | 30 |
| AIR INLET : (in BSP) | 1/4" | 3/8" | 1/2" |
| SUCTION : (in mm) | 25 | 40 | 50 |
| DISCHARGE : (in mm) | 25 | 40 | 50 |
| SUCTION LIFT : (in m.) | 3 | 3 | 4 |
| Max. Solid Size. (in mm) | 5 | 10 | 15 |
For Toxic, Corrosive & Hazardous fumes.
Are designed, manufactured, installed & commissioned as per customer's requirements.
Made of Fibreglass reinforced plastics, Engineering plastics, Composites and Metals as per customer's needs.
Work for absorption, recovery & removal of HCL, SO2, NH3 , H2S, NOx, flue gas, solvents, odours etc.
Highly useful for pickling plants, pesticide formulation units, bulk drugs, pharmaceuticals, dyestuffs, chemical processing industries etc.
Suitable for 3 to 5 mtr. negative suction lift.
Fabricated from PPH for higher strength.
Top cover makes maintenance easy.
Fabricated with in-buift strainer to arrest coarse impurities.
Inlet & Outlet size to match pump suction flange size.
SPECIAL SIZE AND HIGH CAPACITY POT ON REQUEST.
| Sr.No | Model | Capacity |
| 1. | SPP-15 | 15 |
| 2. | SPP-25 | 25 |
| 3. | SPP-40 | 40 |
In Electroplating, it is necessary that certain corrosive chemicals in the electroplating bath are required to be continuously agitated or operated at high current densities. In such cases, solid particles remain suspended rather than settle at the bottom. These suspended particles cause roughness in plating.
In order to remove these suspended particles, continuous filtration of the bath is necessary which is done by Plate Filtration Unit. Plate Filtration Units are engineered to provide absolute and economical removal of suspended solid or organic impurities from the corrosive chemicals.
Filtration units are provided with resuable PP filter Cloth along with Filter Paper. Filter Units are also available with PP Filter Cartridges.
MODELS AVAILABLE :
PFU 200, PFU 300, CFU 300 DUPLEX
| CFU 300 | SINGLE STAGE | DUPLEX |
|
No. of Cartridges |
11 Nos | 22 Nos |
|
Length of Cartridges |
20" | 20" |
|
MOC |
Polypropylene Wound | Polypropylene Wound |
|
Particle Size |
5 to 10 Microns | 5 to 10 Microns |
|
Max Capacity |
12,000 Ltr/Hr | 24,000 Ltr/Hr |
|
Max Pressure |
2.2 KG/CM2 | 2.2 KG/CM2 |
|
Pump |
PCB 40 | PCB 50 |
|
Motor |
2 HP/2900 RPM Vertical Flange |
2 HP/2900 RPM Vertical Flange |
|
Connection |
1.5" (40 mm) X 1" ( 25 mm) | 2" (50 mm) X 1.5" (40 mm) |
Excellent for ON/OFF Service
For Volume Control Balancing
For controlling gas & fumes from fume cupboards in chemical laboratories
For gas scrubbers and pollution equipment
| SIZE | FF | D1 | D2 | PCD | HOLE P | NO. OF HOLES |
| 100 | 215 | 110 | 230 | 190 | 10 | 8 |
| 150 | 215 | 160 | 280 | 240 | 10 | 8 |
| 200 | 242 | 205 | 340 | 300 | 12 | 8 |
| 250 | 256 | 252 | 405 | 300 | 12 | 12 |
| Pump model | Max cap.in LPM at 0 Kg./cm² | Pump size | RPM | Table for Pressure V/s Power (HP) Kg./ cm² | Table for Pressure V/s Capacity (LPM) Kg. / cm² | ||||||
| 3.5 | 5 | 7.5 | 10 | 3.5 | 5 | 7.5 | 10 | ||||
| MSL 10 | 5 | 3/8" | 1440 | 0.5 | 0.5 | 0.5 | 0.5 | 5 | 4.5 | 4 | 3.5 |
| MSL 15 | 12 | ½" | 1440 | 0.5 | 0.75 | 1 | 1 | 11 | 10 | 9 | 8 |
| MSL 20 | 25 | ½" /¾" | 1440 | 1 | 1 | 1.5 | 1.5 | 23 | 22 | 21 | 20 |
| MSL 35 | 45 | ¾" | 1440 | 1.5 | 1.5 | 2 | 2 | 42 | 38 | 35 | 30 |
| MSL 60 | 60 | 1" | 1440 | 2 | 2 | 2 | 3 | 57 | 55 | 52 | 50 |
| MSL 100 | 125 | 1½" | 1440 | 3 | 3 | 5 | 5 | 120 | 115 | 110 | 100 |
| MSL 150 | 175 | 1½" | 1440 | 5 | 5 | 7.5 | 7.5 | 175 | 170 | 165 | 160 |
| MSL 200 | 250 | 2" | 1440 | 7.5 | 7.5 | 10 | 12.5 | 240 | 230 | 215 | 200 |
| MSL 350 | 325 | 2½" | 1440 | 10 | 12.5 | 15 | 20 | 315 | 305 | 290 | 275 |
| MSL 500 | 450 TO 750 | 3" | 1440 | - | - | - | - | - | - | - | - |
| MSL 800 | 800 TO 1300 | 4" | 1440 | - | - | - | - | - | - | - | - |
| 1. These dewatering pumps are verysimple and robustin design and can withstand rough handling at sites. These pumps are portable, self priming, very compact and easy to maintain. 2. The construction of the unit is - Pump below and motor above type. The suction inlet is the bottom so that the water is pumped from lowest level. The motor is squirrel cage induction type suitable for400/ 440 Volts, 3 Phase 50 Hz, A.C. Supply, 2900 RPM / 1450 RPM.Water and oil proof, fitted with ball bearings. The motor is of wet type cooled with transformer oil and fitted with TC/TC MECHANICAL SEAL. This seal prevents the pumped water from entering and mixing with transformer oil. If however the water finds ingress into the motor, it will not burn. 60 hzpumps are available on request 3. These pumps are constructed from quality materials such as Aluminium Alloy, Close grained C.I. Castings, EN 8 Rotor Shaft, CF 8M (SS 316)Impeller etc. Dewatering pumps are also available on request in special materials of construction such as S.S. 316, Aluminium, Bronze, etc. |
| ADVANTAGES | |
|
| APPLICATION STANDARDS | |
| Materials-ASTM - A182 F304/ F-316
| |
