• Shows 2 reading when used with 2 converters.
• Can also be used with only electronic gauging application.
• Saves space & improves checking efficiency.
• Microprocessor Based.
• Unique Scaling Factor.
• RS232 0/P.
• Wireless data transfer possible.
• Least Count: 5 um, 1 um, 0.5 um, 0.1 um.
• Display of Absolute value or Deviation.
• Dynamic Measurement (Max.Min.Diff (TIR) mode) available.
• 3 LEDs for showing status Accept, Reject .Separate for each measurement.
• Buzzer for Rejected Job.
• External Relay.
• Provision for foot switch.

Can be supplied for Through Bore/ Blind Bore applications.Adjustable depth collars can be provided for checking at specific depth.Range : 5mm to 100mm Chrome Plated Steel Range :10mm to 50mm in carbidePlease specify the unit for which Air Plug Gauge is required.Also MGPL can supply the air plug gauge in steel.

1.Carbide Plug Gauges are normally supplied with GO in Carbide & NOGO in Stabilised Steel.

2.Both can be supplied in carbide as per requirement.

3.MGPL gauges have excellent wall thickness to give desired results.Range0.5 to 8 mm Reversible type design8 to 40 mm Taper shank design40 to 60 mm Trilock Design60 400 mm Plate tyhpe Plug Gauge

4.Extra lenght up to 100 mm can be supplied as per requirement.

Keeping an Eye on Future & Responding to the needs of Industry for greater Precision, greater speed & labour saving solution with precision measuring technology, MGPL has successfully entered Air gauging, Air Electronic gauging, Auto gauging & Multigauging.

MGPL Executed Many projects for multiparameter checking of variety of components, MGPL developed one of the most advanced interface unit which can be used with specially designed relay output for marking or can use for sorting.

MGPL has successfully completed many multigauging projects for various components below which are running trouble free to our customer premises. Some of them are as below.

1. CRANKSHAFT 2 & 4 WHLR
2. VARIOUS SHAFT
3. DIFFERENTIAL CASE
4. CAMSHAFT
5. CON ROD
6. ENGINE VALVE
7. CYLINDER BLOCK
8. CRANK PIN
9. BRAKE DISC/DRUM
10. TURBINE HOUSING
11. CENTER HOUSING
12. HOUSING COMPRESSOR
13. RING NOZZLE
14. BACK/SEAL PLATE
15. BUSH/BEARINGS
16. BEARING CAP
17. HUB
18. PISTON
19. CONTROL VALVE MANIFOLD
20. METAL INJECTION MOLDING COMPONENTS : FASTER FACE, SPACER, VANE ETC.

We offer two types of high precision spindles for CNC machining centers; belt drive spindles and direct drive spindles for a versatile range of machining options. The five series of CNC machining center spindles are all very rigid and feature very low runout tolerances, with speeds up to 12, 000rpm. These high precision, high speed spindles are available in a range of sizes and are guaranteed to offer smooth operations and a long service life.

With vast technological improvements, surface grinding machines are now used for a wide range of applications. To ensure consistent and reliable grinding performance, high precision spindles with stable operations are needed. With large investments in research and development our latest CNC surface grinding spindles do just that.

Kenturn offers three different series of machine tool spindle, to cater for the growing demands of surface grinding. These high performance CNC surface grinding machine spindles feature a floating anti-gripping device that helps to extend bearing life and reduces the impact of thermal displacement, thereby increasing spindle accuracy. With a 1/5 tapered nose design and low spindle runout tolerances, these specialized spindles are well suited for the grinding of computer components and mold carving.

All of the specialized surface grinding machine spindles operate at a spindle standard speed of 2000rpm, and are available in outer diameters ranging from 105 to 170mm. All of these high precision grinding machine spindles are built with exacting precision, and tested using leading international equipment to make sure that every spindle delivers the highest performance.

• Patented triple spindle structure, multi-grinding mode selection, up to the mass production, most convenient, effort.
• Triple spindle, independent three machines easily operate by one person
• Multi functional to change different grinding method
• Grinding and separting magnetic pins and workpiece in one machine
• Grinding capacity about 3kg workpieces. 3 barrel is approximately 9KG
• Grinding container sizes 350x250mm. The weight and operation is suit for one person
• The machine is suitable for production of many small parts, with the automation of the production
• Process planning, reaching optimum production model

Patented triple spindle structure, multi-grinding mode selection, up to the mass production, most convenient, effort.Triple spindle, independent three machines easily operate by one personMulti functional to change different grinding methodGrinding and separting magnetic pins and workpiece in one machineGrinding capacity about 3kg workpieces. 3 barrel is approximately 9KGGrinding container sizes 350x250mm. The weight and operation is suit for one personThe machine is suitable for production of many small parts, with the automation of the productionProcess planning, reaching optimum production model

S200 is a RFID Time and Attendance Systems, IN and OUT status, also low price with good performance, designed especially in the purpose of popularizing the fingerprint products.

• Shows 2 reading when used with 2 converters.
• Can also be used with only electronic gauging application.
• Saves space & improves checking efficiency.
• Microprocessor Based.
• Unique Scaling Factor.
• RS232 0/P.
• Wireless data transfer possible.
• Least Count: 5 um, 1 um, 0.5 um, 0.1 um.
• Display of Absolute value or Deviation.
• Dynamic Measurement (Max.Min.Diff (TIR) mode) available.
• 3 LEDs for showing status Accept, Reject .Separate for each measurement.
• Buzzer for Rejected Job.
• External Relay.
• Provision for foot switch.

Can be supplied for Through Bore/ Blind Bore applications.Adjustable depth collars can be provided for checking at specific depth.Range : 5mm to 100mm Chrome Plated Steel Range :10mm to 50mm in carbidePlease specify the unit for which Air Plug Gauge is required.Also MGPL can supply the air plug gauge in steel.

1.Carbide Plug Gauges are normally supplied with GO in Carbide & NOGO in Stabilised Steel.

2.Both can be supplied in carbide as per requirement.

3.MGPL gauges have excellent wall thickness to give desired results.Range0.5 to 8 mm Reversible type design8 to 40 mm Taper shank design40 to 60 mm Trilock Design60 400 mm Plate tyhpe Plug Gauge

4.Extra lenght up to 100 mm can be supplied as per requirement.

Keeping an Eye on Future & Responding to the needs of Industry for greater Precision, greater speed & labour saving solution with precision measuring technology, MGPL has successfully entered Air gauging, Air Electronic gauging, Auto gauging & Multigauging.

MGPL Executed Many projects for multiparameter checking of variety of components, MGPL developed one of the most advanced interface unit which can be used with specially designed relay output for marking or can use for sorting.

MGPL has successfully completed many multigauging projects for various components below which are running trouble free to our customer premises. Some of them are as below.

1. CRANKSHAFT 2 & 4 WHLR
2. VARIOUS SHAFT
3. DIFFERENTIAL CASE
4. CAMSHAFT
5. CON ROD
6. ENGINE VALVE
7. CYLINDER BLOCK
8. CRANK PIN
9. BRAKE DISC/DRUM
10. TURBINE HOUSING
11. CENTER HOUSING
12. HOUSING COMPRESSOR
13. RING NOZZLE
14. BACK/SEAL PLATE
15. BUSH/BEARINGS
16. BEARING CAP
17. HUB
18. PISTON
19. CONTROL VALVE MANIFOLD
20. METAL INJECTION MOLDING COMPONENTS : FASTER FACE, SPACER, VANE ETC.

We offer two types of high precision spindles for CNC machining centers; belt drive spindles and direct drive spindles for a versatile range of machining options. The five series of CNC machining center spindles are all very rigid and feature very low runout tolerances, with speeds up to 12, 000rpm. These high precision, high speed spindles are available in a range of sizes and are guaranteed to offer smooth operations and a long service life.

With vast technological improvements, surface grinding machines are now used for a wide range of applications. To ensure consistent and reliable grinding performance, high precision spindles with stable operations are needed. With large investments in research and development our latest CNC surface grinding spindles do just that.

Kenturn offers three different series of machine tool spindle, to cater for the growing demands of surface grinding. These high performance CNC surface grinding machine spindles feature a floating anti-gripping device that helps to extend bearing life and reduces the impact of thermal displacement, thereby increasing spindle accuracy. With a 1/5 tapered nose design and low spindle runout tolerances, these specialized spindles are well suited for the grinding of computer components and mold carving.

All of the specialized surface grinding machine spindles operate at a spindle standard speed of 2000rpm, and are available in outer diameters ranging from 105 to 170mm. All of these high precision grinding machine spindles are built with exacting precision, and tested using leading international equipment to make sure that every spindle delivers the highest performance.

• Patented triple spindle structure, multi-grinding mode selection, up to the mass production, most convenient, effort.
• Triple spindle, independent three machines easily operate by one person
• Multi functional to change different grinding method
• Grinding and separting magnetic pins and workpiece in one machine
• Grinding capacity about 3kg workpieces. 3 barrel is approximately 9KG
• Grinding container sizes 350x250mm. The weight and operation is suit for one person
• The machine is suitable for production of many small parts, with the automation of the production
• Process planning, reaching optimum production model

Patented triple spindle structure, multi-grinding mode selection, up to the mass production, most convenient, effort.Triple spindle, independent three machines easily operate by one personMulti functional to change different grinding methodGrinding and separting magnetic pins and workpiece in one machineGrinding capacity about 3kg workpieces. 3 barrel is approximately 9KGGrinding container sizes 350x250mm. The weight and operation is suit for one personThe machine is suitable for production of many small parts, with the automation of the productionProcess planning, reaching optimum production model

S200 is a RFID Time and Attendance Systems, IN and OUT status, also low price with good performance, designed especially in the purpose of popularizing the fingerprint products.