UNBALANCED SEAL SI-102 CLO These Series Having Elastomer Bellow, Which Allow Self Alignment In Shaft Motion. It Is Low Cost Maintenance And Parts Are Interchangeable.

SI-102 CLO These Series Having Elastomer Bellow, Which Allow Self Alignment In Shaft Motion. It Is Low Cost Maintenance And Parts Are Interchangeable, This Seal Are Easy To Install

SI-401 CON Conical Spring Seal Are Extremely Sharp And Reliable, Therefore ItIs Used For Various Sealing Applications. This Type Seal Are Loaded With Various Combination Of Face Such As Solid Carbon And Shrink Fitted.

SI-501 M Seal Has Been Designed & Developed For Universal Application Its Compact Design Permits The Uses In The Standard Stuffing Boxes On Centrifugal Pumps.Seal Are Designed To Handle Clear Liquids Under Normal Pv Condition. These Seal Required Lower Stuffing Box For Installation.

SI-601 TB Seal Are Externally Mounted Teflon Bellow Seal. This Seal Designed For Extremely Corrosive Chemica Including Concentrated Acids, Salt, Strong Oxidizing & Reducing Agents & Chemically Active Organic. The Seal Contain PTFE + GFT Composite Bellows Which Is Hydraulically Balanced And Is Machined With High Precision To Form The Prescribed Contour.

SI-701 MB Seal Is Specially Developed For High Temperature Ranges And Sliding Velocities. Pressure Capability Of The Standard Seal Can Be Enhanced By Using This. The Welded Metal Bellow Provide Face Load Under Any Operating Conditions.

SI-801 MG Type Seal Has Been Designed For The Most Commonly Used Application Like Oil & Water, Its Indigenous Design Incorporates Several Functions. This Ensures That The Seal Will Automatically Compensate For Normal Shaft Run-out And Axial Movements. These Versatile Seal Can Be Used On A Wide Range Of Equipment Including Centrifugal, Rotary And Turbine Pumps, Compressors, Chillers And Other Rotary Shaft Equipments.

SI-70 CAR Cartridge Type Seals Are Very Easy To Replace And Gives Maximum Reliability. It Is Downtime And Prolong The Lifetime Of The Seal. With A Custom Built Pump Solution From With A Custom Built Pump Solution From Cartridge, Your Pump Is Capable Of Handling Even Higher Pressures, More Aggressive Liquids, And Excessive Liquid Temperature Etc.

Sl-110 J Seal Are Equivalent To John Crane Type 502 & Type 2100. The Positive Static Seal Between The Bellows And The Positive Static Seal Between The Bellows And The Shaft, Along With The Free Movement Of The Bellows Means That There Is No Sliding Action That Could Lead To Shaft Damage By Fretting. This Ensures That The Seal Will Automatically Compensate For Normal Shaft Run-out And Axial Movements.

UNBALANCED SEAL SI-102 CLO These Series Having Elastomer Bellow, Which Allow Self Alignment In Shaft Motion. It Is Low Cost Maintenance And Parts Are Interchangeable.

SI-102 CLO These Series Having Elastomer Bellow, Which Allow Self Alignment In Shaft Motion. It Is Low Cost Maintenance And Parts Are Interchangeable, This Seal Are Easy To Install

SI-401 CON Conical Spring Seal Are Extremely Sharp And Reliable, Therefore ItIs Used For Various Sealing Applications. This Type Seal Are Loaded With Various Combination Of Face Such As Solid Carbon And Shrink Fitted.

SI-501 M Seal Has Been Designed & Developed For Universal Application Its Compact Design Permits The Uses In The Standard Stuffing Boxes On Centrifugal Pumps.Seal Are Designed To Handle Clear Liquids Under Normal Pv Condition. These Seal Required Lower Stuffing Box For Installation.

SI-601 TB Seal Are Externally Mounted Teflon Bellow Seal. This Seal Designed For Extremely Corrosive Chemica Including Concentrated Acids, Salt, Strong Oxidizing & Reducing Agents & Chemically Active Organic. The Seal Contain PTFE + GFT Composite Bellows Which Is Hydraulically Balanced And Is Machined With High Precision To Form The Prescribed Contour.

SI-701 MB Seal Is Specially Developed For High Temperature Ranges And Sliding Velocities. Pressure Capability Of The Standard Seal Can Be Enhanced By Using This. The Welded Metal Bellow Provide Face Load Under Any Operating Conditions.

SI-801 MG Type Seal Has Been Designed For The Most Commonly Used Application Like Oil & Water, Its Indigenous Design Incorporates Several Functions. This Ensures That The Seal Will Automatically Compensate For Normal Shaft Run-out And Axial Movements. These Versatile Seal Can Be Used On A Wide Range Of Equipment Including Centrifugal, Rotary And Turbine Pumps, Compressors, Chillers And Other Rotary Shaft Equipments.

SI-70 CAR Cartridge Type Seals Are Very Easy To Replace And Gives Maximum Reliability. It Is Downtime And Prolong The Lifetime Of The Seal. With A Custom Built Pump Solution From With A Custom Built Pump Solution From Cartridge, Your Pump Is Capable Of Handling Even Higher Pressures, More Aggressive Liquids, And Excessive Liquid Temperature Etc.

Sl-110 J Seal Are Equivalent To John Crane Type 502 & Type 2100. The Positive Static Seal Between The Bellows And The Positive Static Seal Between The Bellows And The Shaft, Along With The Free Movement Of The Bellows Means That There Is No Sliding Action That Could Lead To Shaft Damage By Fretting. This Ensures That The Seal Will Automatically Compensate For Normal Shaft Run-out And Axial Movements.