Other Products / Services #1362712

Face Materials: Carbon/Stellite / Lecrolloy / Ceramic / Silicon Carbide / Plasma Sprayed Ceramic
Metal Parts: SS 316, SS 304
Secondary Seal: Nitrile, EPDM, Viton, PTFE

Applications

Industrial
Marine

Seal Characteristics:

Single acting
Balanced / Unbalanced
Inside & Outside Mounted
Independent of direction of rotation
Torque Transmission by Secondary seal

Operating Limits:

Shaft Diameter d1 : 10 . 100 mmPressure p : 10 bar (max)Temperature t : 20 . +180O CVelocity v : 10 m/sec>
This seal has self aligning feature which compensate abnormal shaft end play and run out, which leads to improved service life. Secondary seal protect shaft and sleeve from fretting. Drive to the seal faces is given through notches - provided on retainer. Seal can be repaired in field with minimum spares minimising the down time cost

Textile seals for used to yarn & fibre dyeing plants & cloth dyeing application plants, high speed jet dyeing plants, Specially designed U1951 type seal used for diaphragm elastomer to normal pressure machine like a mercerizing machine & pretreatment machine (Benninger -Make) for used different type of caustic & acidic media. In one machine required two pairs of diaphragm seals to fit opposite side of machine. The diaphragm protect the bearing & other machine parts for media contact.

To Be Use For:

Caustic
Acidic
Sodium Hydrogen Carbonate

Operating Limits :

Shaft Diameter : As per machine required
Pressure : Normal
Temperature : Normal

Material Of Construction :

Sealing faces :Carbon, Silicon Carbide, Tungsten Carbide, Chrome Cast Steel & which are suitable for fluid

Elastomer :Viton, EPDM, Silicon, Aflas, PTFE, Hypalon

Hardware :SS 316, Hastelloy C, Monel, Alloy 20

Textile seals for used to yarn & fibre dyeing plants & cloth dyeing application plants, high speed jet dyeing plants, Specially designed U1951 type seal used for diaphragm elastomer to normal pressure machine like a mercerizing machine & pretreatment machine (Benninger -Make) for used different type of caustic & acidic media. In one machine required two pairs of diaphragm seals to fit opposite side of machine. The diaphragm protect the bearing & other machine parts for media contact.

To Be Use For:

Caustic
Acidic
Sodium Hydrogen Carbonate

Operating Limits :

Shaft Diameter : As per machine required
Pressure : Normal
Temperature : Normal

Material Of Construction :

Sealing faces :Carbon, Silicon Carbide, Tungsten Carbide, Chrome Cast Steel & which are suitable for fluid

Elastomer :Viton, EPDM, Silicon, Aflas, PTFE, Hypalon

Hardware :SS 316, Hastelloy C, Monel, Alloy 20

Part Of Identification :

Rotary Face (Seal Ring)
Stationary Face (Mating Ring)
ElastomerSpring

Other HardwerePart Of Identification :

Rotary Face (Seal Ring)
Stationary Face (Mating Ring)
ElastomerSpringOther Hardwere

Thermosyphon SystemsPerformance Limits

Capacity : 7.5 LiterHyd. Test Pressure : 30 KgWorking Pressure : 20 KgMax. working temp.: 180CHeat Transfer area of cooling coil : 0.3mCooling water flow rate

Recommended: 12 Ltrs /min

Max. Level Value : 5.5 LtrsMin. Level Value : 3.5 Ltrs

Metal Parts

Thermosyphon Shell : Carbon Steel / SS 316/SS304Cooling Coil: SS 304 / SS 316>

Accessories

Pressure Gauge (0- 40 kg/c m)For Pressure Measuring of the vesselLevel Gauge For Liquid Level Indicate of the vesselHand Pump For recharge of the vessel With additional quantity of barrier fluid when Thermosyphon is under pressure and Liquid level is low.

Connection Size:

Buffer fluid Inlet - A " NPTBuffer fluid Outlet B NPTCooling water Inlet C " NPTCooling water Outlet D " NPTHand Pump Connection E : NPT (Refilling Connection)Filling Connection F 1 " NPTPressure Gas Connection G " NPTPressure Gauge Connection H 3/8" NPTDrain I " NPTSafety Valve Connection J " NPT

Thermosyphon vessels can be used to provide a source of clean, Pressurized barrier fluid to Double mechanical seals in back to back and nonpressurised buffer fluid for tandem seal Arrangement. The Barrier fluid enters the Thermosyphon Vessel, where it is cooled by water circulating through cooling coil to bring down the temperature of barrier fluid and back to the seal chamber. Super Thermosyphon arrangement is very effective.

SEAL PROOF has indigenously developed chemical process corrosion resistant pumps in wide range of application. Seal proof pumps are specially engineered and designed to exceed the requirement of all industry. The surest way of conveying, mixing, transferring and propelling without leakage and without maintenance.
All rotating parts are dynamically balanced results Vibration free operation
Longer life of bearings low noise
Motor designed for wide voltage range 300-450 volts hence no fear of burn out due to voltage fluctuation and additional advantage of space saving elimination of base plate special coupling and its guard

Applications

Industrial ApplicationWater BoostingSuitable For Water Supply SchemeCommercial Complexes

General Irrigation And Sprinkler IrrigationAir ConditioningHotelsCooling Tower

SEALPROOFengineering has indigenously developed chemical process corrosion resistant pumps in wide range of application. Seal proof pumps are specially engineered and designed to exceed the requirement of all industry. The surest way of conveying, mixing, transferring and propelling without leakage and without maintenance.

Applications

Boiler FeedingPower Plant , Cooling TowersEdible Castor Oil Circulation Of Lubrication Oils

High Pressure TestingHigh Head Delivery Condensate Recovery

Operating Range

Capacity - Q- Up To 20 M3/Hr.TDH H - Up To 250 Mtr.Pump Sizes - DN 15 mm To 50 mmSpeed - N - 1450 rpm at 50Hz and 1750 rpm at 60 HzTemperature 90 CPressure 26 bar.

Material of Construction

The leading manufacturer of non-metalic pumps, Seal Proof now presents the SPE Series Lined pumps specially designed to handle a wide spectrum of highly corrosive media.It uses a hi-tech lining process, free from adhesive bonding. This eliminates peeling off of the lining from the metal body unlike other lined products. Rigorous quality checks through out the lining process ensures years of trouble. free operation. These pumps are available in a variety of lining materials to withstand severe corrosion and temperature conditions.

Features:

The hi-tech lining process involves high prssure moulding at high temperature to ensure uniform thickness of lining free from cavaties, air pockets, cold flows etc. A unique feature is the dove-tail grooves provided on the metal casing and backplate. This ensures a firm grip between the metal and lining material. A dynamically balanced, solid moulded, semi-open impeller with metallic insert gives mechanical strength and durability.

Material of Consturction

The SPE Series lined pumps are available in the following materials. LINING : PFA-(Teflon), FEP-(Teflon), PVDF

Casing and Backplate

Cast Steel, Stainless Steel 316. The M.O.C. is selected on the basis of the compatibility and temperature of the fluid handled as per the specific requirement. The pumps are available for high head and capacity.

Shaft

Shafts are designed for high torque and power transmission with minimum vibration, deflection and noise level.

Sleeve

The sleeves are glided over the shaft, protecting it from corrosive application. Materials: Ceramic, Alloy-20, Hasteloy-c, Hasteloy-B, Monel, Titanium, Silicon Carbide etc

Mechanical Seals

Available with an option of being mounted either externally or internally. The pumps are fitted with specially designed single or double seals with suitable faces along with quenching arangement & necessary.

Gaskets

To ensure firm sealing, PTFE gaskets are provided at the joints

Casing / Backplate

The wetted areas are lined with compatible polymer. The casing has a rugged foot- mounting which is capable of handling high pressure, piping loads and system pressure. Concentric dove-tail grooves ensure a firm grip between the metal body and lining.

Impeller

The impeller has a radial semi- open design, with large contoured flow passages. It is one piece, of robust construction, dynamically balanced and is provided with back vanes to minimise axial thrust for enhanced bearing life.

Applications and Industries Served

• Chemical processing
• Drugs and Pharmaceuticals
• Petrochemicals
• Effluent Treatment
• Food processing
• Fumes scrubbing
• Agro chemicals
• Tanneries
• Perfumeries
• Detergents and caustics
• Breweries
• Acid pickling
• Dyes and pigments
• Tanneries
• Paper and Pulp industries
• Photographic processing