SB-D:Mechanical Seals of the SB-D range are high-speed seals for turbo compressors, screw compressors, gear compressors or rotary piston blowers. The rotating seat is driven by a friction clamp. Good heat transfer and low turbulence losses are endured by guidance of the buffer medium. The product pressure keeps the seal closed if the oil system is switched off on shut down of the compressor.

BR:Mechanical Seals of the BR series are special-purpose seals for use in media containing solids without external flushing or product circulation. Key features are a rotating seal positioned immediately next to the pump impeller, an open seal chamber facing the impeller, and a spring protection sleeve which has proven to be effective in actual service. BR mechanical seals find application mainly in the scrubbing sections of power station flue gas desulphurization systems, and they are also used successfully in the paper industry.BRC:Mechanical seals of the BRC series were developed specially for use in standard chemical pumps. The radial and axial space has been optimized to provide ideal conditions for maximum operational reliability. BRN:The new stationary mechanical seal is ideal for use in dirty, abrasive media containing solids, e.g. in waste water systems and the chemicals industry. The stationary part has multiple springs and faces away from the product. It is thus protected from possible effects of the medium such as sticking and clogging. SB:Mechanical Seals of the SB-range were developed for use in thermal power stations and for pumps in oil production and transport processes.

FR 1000:Fluid Reservoirs are used to supply fluid to single or tandem mechanical seals. They act as a convenient fluid reservoir. The exchange of fluid takes place by the thermosyphon principle or by forced circulation, e.g. with a pumping screw. The FR 1000 is made of transparent polyethylene, complete with clips made of stainless steel. The FR 1000 is resistant to water, glycerine, glycols and methanol; not resistant to mineral oils and toluene.BFS 1000:With BFS 1016 system it is possible to supply buffer/barrier fluid to double and tandem mechanical seals for a broad range of applications. The BFS 1016 thermosyphon vessel is available in 2 standard sizes with flat ends, sight-glasses for level monitoring and with or without cooling coil. BFS vessels are equipped as standard with all the necessary system connections and brackets.BFS 6000:The BFS 6000 range of systems meet all the requirements to supply mechanical seals in accordance with the API 682 guidelines. The vessels are equipped with all essential connections for fitting additional components. The range is available in two standard vessel sizes (shown: BFS 6000) with dished heads; a version which can be dismantled is also available as an option. ARU:The ARU is used as an automatic refill unit and for barrier fluid pressurization in seal circuits. It is possible to use pneumatic or electric power, or a combination of both for the pressurization. The refill unit tank is designed for pressure less operation and is equipped with a level switch and a sight-glass. The refill unit has all pipe work as far as the distributor unit.HE:HE are used to cool process/barrier fluids in seal supply circuits. Designed as a tubular heat exchanger with integrated guide plates, the process/barrier medium is directed through the shell of the HE and the cooling medium through the tubes.BPU:Barrier pressure units of the BPU range perform all the functions of a barrier system essential for operating double seals (circulation and cooling of the barrier medium, pressurization of the barrier fluid and compensation of leakage).

SB-D:Mechanical Seals of the SB-D range are high-speed seals for turbo compressors, screw compressors, gear compressors or rotary piston blowers. The rotating seat is driven by a friction clamp. Good heat transfer and low turbulence losses are endured by guidance of the buffer medium. The product pressure keeps the seal closed if the oil system is switched off on shut down of the compressor.

BR:Mechanical Seals of the BR series are special-purpose seals for use in media containing solids without external flushing or product circulation. Key features are a rotating seal positioned immediately next to the pump impeller, an open seal chamber facing the impeller, and a spring protection sleeve which has proven to be effective in actual service. BR mechanical seals find application mainly in the scrubbing sections of power station flue gas desulphurization systems, and they are also used successfully in the paper industry.BRC:Mechanical seals of the BRC series were developed specially for use in standard chemical pumps. The radial and axial space has been optimized to provide ideal conditions for maximum operational reliability. BRN:The new stationary mechanical seal is ideal for use in dirty, abrasive media containing solids, e.g. in waste water systems and the chemicals industry. The stationary part has multiple springs and faces away from the product. It is thus protected from possible effects of the medium such as sticking and clogging. SB:Mechanical Seals of the SB-range were developed for use in thermal power stations and for pumps in oil production and transport processes.

FR 1000:Fluid Reservoirs are used to supply fluid to single or tandem mechanical seals. They act as a convenient fluid reservoir. The exchange of fluid takes place by the thermosyphon principle or by forced circulation, e.g. with a pumping screw. The FR 1000 is made of transparent polyethylene, complete with clips made of stainless steel. The FR 1000 is resistant to water, glycerine, glycols and methanol; not resistant to mineral oils and toluene.BFS 1000:With BFS 1016 system it is possible to supply buffer/barrier fluid to double and tandem mechanical seals for a broad range of applications. The BFS 1016 thermosyphon vessel is available in 2 standard sizes with flat ends, sight-glasses for level monitoring and with or without cooling coil. BFS vessels are equipped as standard with all the necessary system connections and brackets.BFS 6000:The BFS 6000 range of systems meet all the requirements to supply mechanical seals in accordance with the API 682 guidelines. The vessels are equipped with all essential connections for fitting additional components. The range is available in two standard vessel sizes (shown: BFS 6000) with dished heads; a version which can be dismantled is also available as an option. ARU:The ARU is used as an automatic refill unit and for barrier fluid pressurization in seal circuits. It is possible to use pneumatic or electric power, or a combination of both for the pressurization. The refill unit tank is designed for pressure less operation and is equipped with a level switch and a sight-glass. The refill unit has all pipe work as far as the distributor unit.HE:HE are used to cool process/barrier fluids in seal supply circuits. Designed as a tubular heat exchanger with integrated guide plates, the process/barrier medium is directed through the shell of the HE and the cooling medium through the tubes.BPU:Barrier pressure units of the BPU range perform all the functions of a barrier system essential for operating double seals (circulation and cooling of the barrier medium, pressurization of the barrier fluid and compensation of leakage).