Product / Services
Post Buy Requirement
SC
Scientific Components
Delhi, India
Add Review
Call Now Call Now

Our Products

  1. Podium 5 Products available
  2. Photography Equipment & Supplies 4 Products available
  3. Others 39 Products available

Other Products / Services #4611006

HONEY COMB BREAD BOARD

HONEY COMB BREAD BOARD
  • features High-quality steel honeycomb optical tops, Working surface, Honeycomb core
The high-quality steel honeycomb optical tops that consist of a steel honeycomb core laminated with steel top and bottom skins provide high stiffness with respect to low weight. The steel honeycomb core is sandwiched between two faces of skin materials (laminated with steel bottom and ferromagnetic stainless steel top skins) and finished with side panels.The top skins are stretcher-leveled and pressure bonded to achieve excellent top flatness and tightly sanded with an orbital pattern to remove burrs and provide non-glare & non-reflecting finish.
View Complete Details
Ask Latest Price & Details
PNEUMATIC VIBRATION ISOLATION

PNEUMATIC VIBRATION ISOLATION
  • Features High quality steel honeycomb table tops, Any directional vibration isolation
A perfect plane board for optical experiments is utilized with a honeycomb sandwich panel structure, which has the excellent rigidity and relatively light weight considering the mass. An array of mount holes on the magnetic attachable stainless top easily provides a researcher to secure optical components onto it.The conventional pneumatic isolators have lower vibration isolation efficiency in horizontal direction than vertical in general.But Scientific Components new isolators provide an excellent isolation in all directions by the special designed horizontal vibration removal mechanism and the isolator's natural frequency is very low.
View Complete Details
Ask Latest Price & Details
Active air isolators

Active Air Isolators
  • Control: Pneumatic.
  • no. Of Isolators: 4 Nos.
  • Height of Isolators: 600-700 mm.
  • Setting Time: ≤ 1 Min.
Active air isolators are employed in our table supports for isolating the table top from vertical and horizontal disturbances. Here legs operate independently. The isolators which are fixed to four vertical members of the support system are individually filled with air by a Air Compressor to a pressure of 40-80 PSI. Once pressurized, the procedure need not be repeated for a long period. The system is cost effective, maintenance free and easy to operate.
View Complete Details
Ask Latest Price & Details
PASSIVE VIBRATION ISOLATION

PASSIVE VIBRATION ISOLATION

The Active and the Passive isolation systems are both based on compressed air, providing vibration isolation in frequencies above 2Hz and 10Hz (respectively) making them ideal systems for demanding photonic experiments or for work in a noisy environment. In addition, Scientific Components also offers rigid support systems with no vibration isolation for less demanding applications which require only breadboard isolation. The table below compares the isolation performance of our different isolation systems.
View Complete Details
Ask Latest Price & Details
RIGID TABLETOP SUPPORTS

RIGID TABLETOP SUPPORTS

This support system has four vertical members made from 100 mm x 100mm steel tube and eight horizontal members made from 50 mm x 50 mm steel tubes. These members can be joined by nuts & bolts at the lab site. The honeycomb surface rests on four heavy-duty bolts on the top of the support system, which can also be adjusted for leveling. The adjustment range is 5 mm. The support system is given moon light finish by epoxy paint
View Complete Details
Ask Latest Price & Details
BREAD BOARD ENCLOSURE

BREAD BOARD ENCLOSURE
These enclosure systems attach directly to our Breadboards utilizing the four counter bored mounting holes provided on all boards. These enclosures are ideal for protecting delicate instruments located on the breadboard. All enclosure systems have an internal height of 12". For light-sensitive instruments, we offer several options designed using black hardboard panels. While the enclosures are shipped flat, they can be assembled within ten minutes, using only a M5 hex wrench or ball driver.
View Complete Details
Ask Latest Price & Details
breadboard frame

Breadboard Frame
  • Load Capacity, Including Bread Board: 200 Kg. (440 lbs.).
  • Working Height: 735mm + Height of Bread Board.
  • Finish: Dark Gray.
  • Features Rigid Bread Board Support., Casters and Leveling Feet Included.
This breadboard frame is an economical solution that is designed for use with our PBG Series. Its light weight construction and included casters allow the user to maneuver the workstation easily to any desired location. This alternative to rigid frames can be useful in providing an extra work surface and support for breadboards at an economical price.
View Complete Details
Ask Latest Price & Details
Castor Wheels

Castor Wheels
The Pneumatic Vibration Isolated system and rigid supports can be connected with castor wheels at the bottom for moving the table system in and around the lab whenever required.
View Complete Details
Ask Latest Price & Details
KINEMATIC PLANE MIRROR MOUNT

KINEMATIC PLANE MIRROR MOUNT
  • Adjustment range in two planes: ± 3 degree.
  • Fine adjustment: Driven by 80 tpi lead screws or micrometer.
  • Finish: Black anodized.
Front surface of the mount is plane. Optics can be fixed to the front surface of the mount by adhesive. Plane mirrors are available in two types. One type will have translation in addition to tilting. This type of mount will have three lead screws. Two of them for tilting and third one for translation.
View Complete Details
Ask Latest Price & Details
KINEMATIC MOUNT FOR RECTANGULAR OPTICS

KINEMATIC MOUNT FOR RECTANGULAR OPTICS
  • Tilting Range: ± 3 degree.
  • Sensitivity: 20 arc sec. (Lead screws covered for the protection from dust)
  • Finish: Black anodized.
This mount can be used to position square and rectangular optics. MirrorBeam splitter is held in front surface of the mount in a stepped bore by nylon tipped grub screw.
View Complete Details
Ask Latest Price & Details
mirror holder

Mirror Holder

The Mirror Holder can be used to mount 25 mm mirrors with thicknesses from 2.5 mm to 6 mm. The clear aperture of the mirror holder is 24 mm.
View Complete Details
Ask Latest Price & Details
Gimbal mirror mount

Gimbal Mirror Mount
  • Finish: Black anodized.
  • Construction: Aluminium alloy.
  • Sensitivity: 4 arc sec.
  • Fine adjustment: +/ - 2 degree by 80 tpi lead screws.
This large type Gimbal mirror mount can hold 4 to 6 inch optics and provides 360 degree coarse positioning in two axes about the mirror surface in addition to fine adjustments. The device is base mounted. Optics held in position by a threaded ring inside a threaded bore of the device. A large aperture in the base allows light to pass through.
View Complete Details
Ask Latest Price & Details
GIMBAL MOUNTS

GIMBAL MOUNTS
  • Angular Range: ±2.5° (for 1 inch) & ±2.0° (for 2 inch).
  • Angular displacement: 0.35° (for 1 inch) & 0.2° (for 2 inch) per revolution.
  • Maximum Optics thickness: 16 mm.
The Gimbal mounts for 1 inch& 2 inch optics. The adjustment knobs are located on the top surface of the mount, making them easily accessible even if the mount is integrated into an optical cavity. They provide excellent angular positioning performance.
View Complete Details
Ask Latest Price & Details
Beam Splitter Mount

Beam Splitter Mount
  • Finish: Black anodized.
  • Construction: Aluminium alloy.
  • Fine adjustment: By 80 tpi lead screws.
Optics held in front surface of the mount in a stepped bore by nylon tipped grub screw. Clear aperture for holding optics will be only for 250-270 degree instead of 360 degree.
View Complete Details
Ask Latest Price & Details
SQUARE FILTER HOLDERS

SQUARE FILTER HOLDERS
  • Feature Suitable for rectangular/Square Filters., Quick removal of filters., Optics held by leaf springs.
  • Finish: Black anodized.
Square filter holders can hold filters up to 3 mm thickness. The filters are held in position by leaf springs. Square filter holder can hold a single filter at a time and can be stacked for multiple filter assembly. When two or more filter holders are ordered at a time, bolts and nuts suitable for stacking up to 4 filter mounts are supplied along with holders.
View Complete Details
Ask Latest Price & Details
FILTER WHEEL

FILTER WHEEL
  • Material: Aluminium alloy.
  • Finish: Black anodized.
  • Filter / Filter cell size: 25mm (1") Dia.
Filter Wheel Model - FW-1 can hold 6 filters filer cells) 1 inch dia) at a time. Filters filter cells are held by threaded ring. The wheel can be locked in position after setting. Filter Wheel Model - FW-2 can hold 12 filters filter cells at a time, 6 on each side. Filters filter cells are held by threaded ring. The wheel can be locked in position after setting.
View Complete Details
Ask Latest Price & Details
PRECISION POLARIZER MOUNTS

PRECISION POLARIZER MOUNTS
  • Material: Aluminum alloy.
  • Sensitivity: 20 arc sec.
  • Fine adjustment range: ± 4 degree fine rotation.
  • Finish: Black anodized finish.
Precision rotary adjustments are possible with this mount. Platesheet polarizer are held between two threaded rings inside a threaded bore. For other shapes, adapters have to be used.
View Complete Details
Ask Latest Price & Details
he ne laser

He Ne Laser
  • Optical Power: 2, 5, 10, 12mW.
  • Operating wavelength: 632.8 nm (Red).
  • Power input: 220V AC, 50Hz.
  • Beam diameter: 0.8mm.
Most common and inexpensive gas laser, the helium-neon laser is usually constructed to operate in the red at 632.8nm. Collimation of the beam is accomplished by mirrors on each end of an evacuated glass tube which contains about 85% helium and 15% neon gas at 1300 atmospheric pressure. A typical helium-neon laser consists of three components: laser tube, a high-voltage power supply and structural packaging. The laser tube consists of a sealed glass tube which contains the laser gas, electrodes and mirrors. Depending on the power output of the laser, the tube may vary in size.
View Complete Details
Ask Latest Price & Details
diode lasers

Diode Lasers
  • Wavelength (nm): 633 (+/-3nm).
  • Output power (mW) : >20.
  • Transverse mode: Near TEM00.
The wavelength range of our diode lasers is from 375nm to 2200nm, and the out power ranges from 1mW to 20W. Red diode laser module at 633nm is made features of TEM00 mode, long lifetime, low cost and easy operating, which is used in measurement, spectrum analysis as the substitute for He-Ne lasers.
View Complete Details
Ask Latest Price & Details
SINGLE SPECTROPHOTOMETER

SINGLE SPECTROPHOTOMETER
  • Feature Quantitative, Wavelength Scanning, Multi-Wavelength
This basic device for qualitative and quantitative analysis is an essential laboratory analytical instrument widely applied in experiments of clinical trials, metallurgical industry, geological environmental protection, chemical machinery manufacturing production, etc., also for instruction and research. A. CT-5, 6 Series are advanced single beam design consisting of 5 models. Different one with different bandwidth and wavelength accuracy. All of them provide excellent performance for measurement in the range of 190nm to 1100nm.
View Complete Details
Ask Latest Price & Details
spectroscopic ellipsometer

Spectroscopic Ellipsometer
Spectroscopic ellipsometer is widely used for thin film and measurements. It uses a high speed CCD array detection to collect the entire spectrum. It measures films from nanometer thickness up to tens of microns and the optical properties from transparent to absorbing materials. It accurately measures optical constants like refractive index, film thickness and extinction coefficient.
View Complete Details
Ask Latest Price & Details
Digital Polarimeter

Digital Polarimeter
  • Measurement Range : -45° - +45°, -120 °Z + 120 °Z
  • Minimum Reading : 0.001 °Z and 0.01 °Z.
The Polarimeter is used for determining the optical rotation of substances. By measuring optical rotation, the concentration, content, purity etc. of certain substances can be found out. Therefore, the Polarimeter has become one of the most useful instruments in laboratories of sugar industry, pharmaceutical industry, oil refining, foodstuff industry, chemical industry, universities and scientific research field. Major modules in our Polarimeter include light source, Interference filter, polarizer, faraday modulator, sample chamber, analyzer and Detector.
View Complete Details
Ask Latest Price & Details
RAIL WITH DOVETAIL DESIGN

RAIL WITH DOVETAIL DESIGN

  • Material: Aluminium alloy.
  • Thick: 15.5mm.
  • Finish: Ground finish.
These rails offer excellent linearity and smooth carrier translation. Rails have linear scale reading in millimeters. M6slots are provided for fixing it on optical breadboard and the carriers are compatible with our rails having dovetail design. They are available in standard width of 95mm and of various length ranging from 25 mm to 150 mm. The carriers can be locked anywhere on the rail. Both M6 and M4 tapped holes are provided on it for mounting components.
View Complete Details
Ask Latest Price & Details
DOVETAIL OPTICAL RAIL

DOVETAIL OPTICAL RAIL

  • Material: Aluminum Alloy.
  • Finish: Black Anodized.
The Dovetail optical rails are our smallest rails. These compact dovetail rails are precision machined on all surfaces to maintain good lateral alignment, which is necessary for an optical assembly. Both the rails and carriers are machined from an aircraft grade aluminum, which ensures good dimensional stability during manufacturing. The rails feature numerous M6 (14") counter bores for mounting flexibility. Rails 300 mm (12") and longer offer mounting slots to provide additional mounting flexibility. The end of each rail is M4 tapped for vertical mounting.
View Complete Details
Ask Latest Price & Details
Plano Convex Lens

Plano Convex Lens
  • diameter tolerance +0/-0.1mm
  • clear aperture >90%
Plano-convex lens is the most common item used for light focusing and collimation. Coated with antireflective coatings, lenses are used in imaging, lasers and fiber optics. Catalog items list consist of most common diameter and focal length uncoated lenses made from NBK7; UVFS; CaF2 and ZnSe. Any catalog lens can be coated with dielectric or metallic coating.
View Complete Details
Ask Latest Price & Details
DISPERSING PRISMS

DISPERSING PRISMS
  • Material BK7, UVFS
  • CLEAR APERTURE >80%
Dispersing prisms have three 60 angles therefore they are also referred to as equilateral prisms. It provides advantage over diffraction gratings where higher orders diffraction effect is unwanted. Typical applications is wavelength angular separation, where the prism is placed in a beam path to refract the beam twice. Common scheme is to use the prism in minimal deviation angle, which is achieved by aligning the wavelength of interest to travel in parallel to the prism base. This ensures, that angles of incident and refracted beams are equal in respect to corresponding surfaces. This alignment provides benefit of maximum clear aperture and least overall reflection loss for p-polarization.
View Complete Details
Ask Latest Price & Details
Dove Prisms

Dove Prisms
  • MATERIAL BK7.UVFS
  • DIMENSION TOLRENCE +0.0/-0.2M
Dove prisms are shaped from a truncated right-angle prism. A beam of light entering one of the sloped faces of the prism undergoes total internal reflection from the inside of the longest (bottom) face and emerges from the opposite sloped face. Images passing through the prism are flipped, and because only one reflection takes place, the image's handedness is changed to the opposite sense. Dove prisms have an interesting property - when they are rotated along their longitudinal axis, the transmitted image rotates at twice the rate of the prism. It is very important that the application must be used with parallel or collimated beam and the large square reflective surface should be kept very clean. Another application is used as a retro reflector. For this application it performs as a right-angle prism.
View Complete Details
Ask Latest Price & Details
Interference Filters

Interference Filters
  • CLEAR APERTURES >18MM
  • BLOCKING <0.01%
We supplies high quality standard and custom-made interference filters within the spectral range from 250 nm to 5000 nm. We also can offer biomedical band pass filters, which are specially designed for biomedical instrumentation, including chemistry analyzers and micro plate readers. These band pass filters include standard or custom matched filters. Fluorescence filters, which we can supply includes such features as steep slopes, deep blocking (up to OD 6), minimal spectral crosstalk, high transmission and environmental durability.
View Complete Details
Ask Latest Price & Details
Meniscus Lenses

Meniscus Lenses
  • CLEAR APERTURES >90%
  • DESIGN WAVELENGTH 632.8NM
Meniscus lenses have two curved surfaces one of which is protrusive while other is intrusive, also these lenses are referred to as convex-concave lenses. Radii of curvature of both surface can be chosen independently from each other. Meniscus lenses find application in optical systems, where aberrations need to be minimized, for instance in multi lens focusing objective, where it helps to minimize focal spot of the beam. The same benefit is applied in collimators. Another advantage is that meniscus design allows to make longer focal length lenses than the ones available in Plano-convex design. Lenses with equal radii of curvature on opposite sides serve well as substrates for resonator mirrors.
View Complete Details
Ask Latest Price & Details
Post Base

Post Base
  • Thickness 9mm Thickness
  • Material Aluminum Alloy.
  • Finishing Black Anodized Mat Finish
  • Type Of Post Bases Square, U & H.
  • Mounting Holes M6 Clearance Slots For Mounting To Breadboards. M6 Tapped Holes For Mounting Post Holders.
View Complete Details
Ask Latest Price & Details
Lab Jack

Lab Jack
  • Material Aluminium alloy.
  • Mounting surface Size 6 inch x 8inch
  • Finishing Mat Black
  • Item Code LJ-102
View Complete Details
Ask Latest Price & Details
Vibration Isolation System

Vibration Isolation System
  • Load Range 300 – 500 kg. / 700 – 1600 kg.
  • Vertical Adjustment 11 mm.
  • Pressure Range 0.5 – 1.9 kg.
  • Item Code VISP-501
View Complete Details
Ask Latest Price & Details
Optical Breadboard

Optical Breadboard
  • Minimum Load Capacity 400kg.
  • Maximum Load Capacity 900kg.
  • Support Pad Diameter 10cm.
  • Channel Size 4 inch x 1.5 inch.
  • Material Steel Black Coated.
  • Finishing Mat Black.
View Complete Details
Ask Latest Price & Details
Laser Beam Steering

Laser Beam Steering
  • Resolution 2 arc sec.
  • Finishing Black Anodized.
  • Item Code LBS-124
  • Range 360° azimuth, 20° elevation, 12’’ vertically.
  • Construction Aluminium alloy, Stainless steel.
View Complete Details
Ask Latest Price & Details
Mirror Mount

Mirror Mount
  • Range ± 5.
  • Reset ability 5arc sec
  • Mirror Size 25mm, 50mm, 75mm, and 100mm.
  • Item Code MM-111
View Complete Details
Ask Latest Price & Details
Laser Tripod

Laser Tripod
  • Load bearing capacity 5kg, 10kg, 15kg, and 20kg.
  • Azimuth angle covering full 360°.
  • Tilt (elevation) coverage - 35° to + 30°.
  • Item Code TP-119
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.