Our Products
Scanners
2 Products availableSensors And Transducers
1 Products availableProcess Controllers
1 Products availableTransmitter Device
1 Products availableGenerators
1 Products availableOur product range contains a wide range of Loop Calibrator, Universal Calibrator, Table Top Calibrator and Temperature Calibrator
We makestruly portable and highly reliable Loop Calibrator This can be used for Two WireTransmitters & other mA operated ProcessControl Instruments. Basically designedto suit Instrument Lab as well as fieldcalibration. This is powerful Toolfor Commissioning , Quality AssuranceRoutine Maintenance and Trouble Shooting.
FEATURESLoop Calibrator suppliersa) Field Transmitter & Process Control Instrument
b) As fault finding tool + Quality Assurance Tool
Power ON | This switch powers the instrument with batteries / eliminator when switched “ON” |
mA Adj | To get variable mA outout by multiturn Helipot. |
Source Step | To get variable or fixed mA output from Loop Calibrator suppliers. |
Terminal | Provided mA source. |
Battery Eliminator | (Optional) This facility is provided in the Calibrator to suit the operation on 230V AC 50 Hz ± 10%. As soon as you connect Eliminator Socket, batteries get disconnected automatically & vice versa. |
Battery Replace | When “ Low Bat ” Indication appears on DPM, the discharged batteries must be replaced, other wise the accuracy will not be achieved. For replacing battery remove side – bottom plate and then slide out the bottom plate on which battery is firmly placed. |
Calibration | Easily accessible pots for Cal Adj. Please refer Instruction Manual. |
Additional Information:
Payment Terms : L/C
Delivery Time : 1 day
SBK Instrumentation makes highly reliable test lab standard Universal Calibrator which operateson normally available AC Supply. This is useful for Cailbration and performance observation formany types of Process Control Instruments and Testing Equipments. Table Top Calibrator supplier uses tool forElectronic Instrument manufacturers and R and D Units for performance verification and QualityAssurance.
FEATURESTable Top Calibrator suppliers
Power ON | This switch powers the instrument when switched ‘’ON’’ |
Select | Rotary selector switch to select required parameter mV/mA/Ohm/Temp |
Mode | Source (Generation) or Sink (Measurement) facility can be selected |
mV / mA Coarse & fine adjustment | Both the potentiometers are Multi-Tum Heliports & used to get exact value of mV/mA |
RTD Simulation | Pt100 simulation directly in terms of Temp is achieved by Multi-Turn Helipots.You can select the temp for which Resistance output is required. Read the value then Feed by using READ/FEED SWITCH. |
Ohm | To Measure Resistance in the range 0 1999.9 ohms (Calibrated for o 500 ohm) in Source and Sink Mode |
Terminals | Are provided for mV (Source/Sink), mA Source, mA Sink & Pt100 (RTD) Source/Sink and DC Voltage. |
Temperature Calibrator suppliers makes highly reliable test lab standard Temperature Calibrator which operateson normally available AC Supply. Temperature Calibrator suppliers is used for Calibration and Temperature performance observation formany types of Process Control Instruments and Testing Equipments. This is very useful tool forElectronic Instrument manufacturer and R&D Units for performance verification and QualityAssurance.
FEATURESTemperature Calibrator suppliers
Functional description
Power Supply : | Two batteries of 9V size PP3 (Optional: Battery Eliminator) |
Indication : | 4 ½ digit LCD Indication directly in terms of Temperature |
Accuracy : | 0.1 % ±1 digit |
Effect of ambient : | Change 0.002% / Deg C ref 25 ËC |
Operating Temp : | 0 to 50ËC |
Storage Temp : | 0 to 70ËC |
Humidity : | Max 90 % Rh Non –condensing |
Size : | 170(H) * 90(W) * 45(D)mm |
Weight : | 1.0 Kg approx. |
Battery Eliminator : | with 2 No’s 9V DC Ripple free output to suit above calibrator for operation on 230V AC 50Hz ± 10% power supply. |
Battery life : | 6 Hrs in case of continuous operation with Standard battery. |