Sb Engineers

Bakrol, Ahmedabad, Gujarat

We Offer Single & Double Girder Gantry/Goliath Crane. Single & Double Girder Gantry/Goliath Crane: Goliath Cranes or Gantry Crane are adapted to applications where overhead runways would be not possible, costly to erect and difficult to maintain in alignment. Where the installation is only temporary a gantry crane can be moved to a new location with less trouble or expenses than an overhead crane and its runway. Also it is comparatively easy and inexpensive to extend the length of the runway and thus increase the working area of the crane. Most goliath crane/ gantry crane installations are outdoors applications. Available with our Ranges: • Full Gantry with single/double girder • Semi Gantry with single/double girder • Manual Gantry Specifications • Capacity : 0.5 Tons Onwards • Span : Up to 30 meter • Lift : 0.5 meter to 20 meter

These under slung/Suspension Cranes are used in the areas where there is no option of the supporting steelwork beneath the floor. The track for such cranes is held by the roof structure or by the pillars. These cranes required less space and run on the lower flange of the crane runway. This flange is placed directly on the ceiling and is highly profitable in terms of judicious use of space. We manufacture these in compliance with the requisite industry standards.

Salient Features: Amply proportioned Main Girders of Box section Fabricated from IS: 2062 plates that ensure Maximum rigidity with a minimum dead weightModular design, covering a very wide operating range. The systems are designed for ease of installation and maintenance and reliable operation with fuse less circuitry, ducted wiring and non-screwed terminals. Each drive group is equipped with a motor overload protectionPrecision flat helical / spur gear units in light alloy housings with case-hardened gears high- grade surface treatment and permanent oil / grease lubricationHigher efficiency to save power.All motions are protected with limit switches to prevent over hoisting & over travelling motion.Platform with hand railing for easy, simple & safe maintenance of the crane extended partially or totally along the girder width.

We are offering single girder crane.design: ‘sb cranes’ are designed & manufactured accordance with is-807, is-3177 & is-4137 considering factor of safety in respect to appropriate class of duty. duty: sb cranes are designed for various class of duties:- motors: the motors are used specially crane duty (s4) suitable for frequent starting, reversing & braking in accordance with is-325. Motors are totally enclosed in dust proof & fan cooling (tefc) construction, sq. Cage motors, insulation class f, ip54 protection, foot / flange/face mounted. brakes: electromagnetic single-dual ac disc type/electromagnetic shoe type/ eht brakes are provided in all motions. These brakes are “fail to safe” type means automatically release when the motor circuit is on and applied when motor circuit is off. Dc brakes are also provided on request. gear box the entire gear boxes are made of accurate hob cut helical / spur gears & pinions having hardness 250 to 350 bhn made from carbon alloy steel. All gears & pinions running on antifriction type ball / roller bearings in totally enclosed oil bath giving constant splash lubrication. The helical / spur gear designed for adequate strength and optimum wear resistance for smooth operation & long life. wheel assemblies: long travel wheels are straight treaded double flanged forged steel wheels. Wheels are supported on antifriction ball or double row self aligned spherical roller bearings in special blocks of 'l' type design ('l' type bearings) for easy maintenance. electrical panel: -modular design, ease to install and maintain, reliable operation, fuse less circuitry, ducted wiring and compact terminals. Motor overload protection to prevent overloading. limit switch: safety limit switches for stoppers will be provided to prevent over traveling in all motions. painting: -two coats of primer before assembly & two coats of synthetic enamel after testing. optional features: • variable speed through vvf drive • soft starter • slipring motors • wireless radio remote control • shrouded dsl system for power feeding • flameproof cranes

We offer the double girder cranes are generally used when heavy loads and wide spans are required. Double girder cranes consist of two torsion-free box girders and load lifted by crab which is running on top of two girders. manufacturing range: • capacity : up to 100 ton • span: up to 35 mtr. • lift : up to on customer’s request

Available with our Ranges:Full Gantry with single/double girderSemi Gantry with single/double girderManual Gantry SpecificationsCapacity : 0.5 Tons OnwardsSpan : Up to 30 meterLift : 0.5 meter to 20 meter

CRANES' are designed & manufactured accordance with IS-807, IS-3177 & IS-4137 considering factor of safety in respect to appropriate class of duty.We offer our clients a wide range of compact sized Single Girder EOT Cranes used for various application purposes. Light weight, easy operations and maintenance are some of salient features of these cranes.

S.B Engineers is one of the acknowledged Jib Crane Manufacturers in Ahmedabad. When looking for a lifting option for a smaller space, one should look for jib crane. This jib crane is an excellent choice, as it is strong, versatile, robust and flexible. The tough construction of the jib boom ensures that it will not wear out. These jib cranes can be used for material and machinery loading-unloading small assembly jobs, localized fitting, etc. Furthermore, the company is one of the proficient Jib Crane Manufacturers in India. The available ranges are:

• Pillar mounted jib crane wall

• Cantilever mounted jib crane wall

• Travelling jib crane

Specifications capacity: up to 5 tonJib arm length: up to 7 meter Swivel motion: electrical Additional information payment terms: l/cMinimum order quantity: 4 jib cranesDelivery time: 5 weeks

We are offering jib cranes. when looking for a lifting option for a smaller space, one should look to the option for jib crane. This crane is an excellent choice, as it is strong and versatile, robust and flexible. The tough construction of the jib boom ensures that it will not wear out. These cranes can be used for material and machinery loading-unloading small assembly jobs, localized fitting etc. available with our ranges:pillar mounted jib cranewallcantilever mounted jib cranewall travelling jib crane

We are offering wall travelling jib cranes. the sb single girder wall travelling crane is designed for operation on a lower level beneath a large travelling crane system. These cranes provide additional handling possibilities and ensure smooth and trouble-free material handling between different working areas. Sb single girder wall travelling cranes are available for load capacities up to 5mt with outreach up to 5m. It is possible to mount several cranes on the same bay rail.

These under slungSuspension Cranes are used in the areas where there is no option of the supporting steelwork beneath the floor. The track for such cranes is held by the roof structure or by the pillars.