Our Products
Industrial Machinery
2 Products availableTesting Equipments
1 Products availableMeasurement Gauges & Fittings
1 Products availableElectric Cutting Tools
1 Products availablePen, Pencil & Writing Instruments
1 Products availableLeading Manufacturer, Supplier & Retailer of Torque Tester, Scuff Tester, Box Compression Tester, Box Compression Strength Tester and Bursting Strength Tester.
The moment of a force or system of forces tending to cause rotation of an appropriate closure in a direction opposite to that of application, causing the closure to be unsecured from its position on the neck finish of an appropriate container. This method covers the application with a given torque of a threaded or lug-style closure to a container, and measures the torque required to unscrew the closure from a container.
This machine covers the application with a given torque of a threaded or lug-style closure to a container, and measures the torque required to unscrew the closure from a container.
Features:
Easy loading of the specimen to be checked.Hand operated closures for perfect fitment of the specimenWide range and capacity of the machine.
Technical Specification:
Torque : 20Nm | |
Machine with capacity of 40 Nm can be provided on request | |
Can hold bottles from 35mm to 150mm diameter | |
Power : AC 220V 50Hz 1ph |
The Rub Proof Tester is used to evaluate the relative abrasion resistance of printed inks, Coating laminates and substrates.
ApplicationAbrasion resistance is a desirable and a critical property of printed materials.
Abrasion damage can occur during shipment, Storage, handling, and end use etc. This results in a significant decrease in product appearance and legibility of product information.
This Machine compares the abrasion of materials under laboratory conditions.
The machine subjects the Specimen to liner stroke of the receptor block for determining the abrasion resistance.
ASTM: D5264 - 98(2004) | |
We also manufacture Rub Proof tester suitable for testing as per TAPPI T830 standard. | |
Machine for abrasion test of fabrics also available. |
Easy mounting of specimens on the receptor block. | |||||||||
easy addition of extra weight. | |||||||||
Settable number of cycles & Speeds. | |||||||||
Machine stops automatically after the preset cycles are completed. | |||||||||
Display indicating remaining cycles.
Machine Dimension:
Technical Specification:
|
Corrugated and solid fibre board boxes are subject to compressive forces when stacked and during transportation.
It is vital to determine the Compression Strength of the Box inorder to make sure that the box will be able to resist the anticipated compressive forces and to determine the load that the box will be able to with stand during transit and storage.
This equipment is designed to measure ability of the container resist external compressionloads during transit and storage.
Compression Strength Test also serves as a useful index of over all quality of the material and workmanship of the box.
Available in three models:
1) Digital Model2) Micro Processor-based Digital Model3) Fully Automatic Model with Integrated Computerised Touch Screen Control Panel
Our Standard Model has capacity of 1000 Kgf and maximum box size of 1 mtr x 1 mtr x 1 mtr.Models with higher load capacities and to accommodate larger size boxes available on request.
Technical Specification:
Dimensions in mm(LxWxH)Control Panel | including 1600 x 1350 x 2060 (Approx.) |
Weight in kgs | 820 (Approx.) |
Power Requirement | 1.25 kW Three Phase 415 Volts Separate Neutral & Earthing |
Capacity (Standard Model) | 1000 Kgf |
Max. Box Size (Standard Model) | 1000 mm x 1000 mm x 1000 mm |
Bursting Strength is a reliable index of the strength and performance of materials like paper, paperboards, corrugated boards and boxes, solid fibreboards, filter cloth, industrial fabrics, leather, rexine, etc.
UBIQUE Bursting Strength Tester is ideal for testing a wide range of materials to determine their quality, strength and performance.
UBIQUE Bursting Strength Tester is easy to operate. It is scientifically calibrated for reliability. It is widely used by industries and institutions and stands out as a proven and reliable equipment.
A number of models are offered to suit different requirements of customers.
Bursting Strength is a reliable index of the strength and performance of materials like paper, paperboards, corrugated boards and boxes, solid fibreboards, filter cloth, industrial fabrics, leather, rexine, etc.
UBIQUE Bursting Strength Tester is ideal for testing a wide range of materials to determine their quality, strength and performance.
UBIQUE Bursting Strength Tester is easy to operate. It is scientifically calibrated for reliability. It is widely used by industries and institutions and stands out as a proven and reliable equipment.
A number of models are offered to suit different requirements of customers.
All Models of Bursting Strength Tester are suitable for testing as per the following National and International Standards
IS | 1060 (Part I) 1996 1397 1967 (Kraft Paper) 13228 1991 (Corrugated Board) 1966 1975 (Fabric) 2771 (Part I) 1977 (Corrugated Box) | |
FCBM | 3:90 (Corrugated Fibreboard) | |
ASTM | D 774 / D774M-96a Paper | |
FEFCO | TM 4 1997 | |
TAPPI | T 403 om-91 (Paper) T 810 om-92 (Corrugated & Solid Fibreboard) T 807 (Paperboard and Linerboard) |
Determines water absorption/penetration (cobb value) which is the quantity of water in mgs absorbed by surface of 100 cm2 of the specimen on one side only in a specified time under a specified head of water.
Suitable for Testing as per following Standards
IS: 1060 (Part I) 1996ASTM: D 3285 93TAPPI: T 441 om-98FEFCO: TM 7 1997
Provided with tilting arrangement to remove water automatically. | |||
Height marks provided for maintaining correct water head. |
Dimensions in mm L x W x H | 350 x 320 x 170 | ||
Weight in kg | 25 | ||
Roller Weight in kg | 10 | ||
Cylinder | Corrison Resitant Cylinder |
Description
Specimen | Water Head Mark | Time of Test |
Paper | 10 mm | 1 minute |
CFB | 25 mm | 30 minutes |
Bitumen Waterproof Paper | 100 mm | 18 hours |
The first of its kind in India, to fulfill the basic need of quality control and development for manufacturers and users of Cone/ Core. An electronic instrument to measure and directly indicate the Compression Strength of Cone/Core.
Technical Specifications
Model | UCCT1000 & UCCT1000-P | UCCT2000 & UCCT2000-P |
Load Cell Capacity | 1000 kgf | 2000 kgf |
Load Cell Sensitivity | ± 0.2% Full Scale | ± 0.2% Full Scale |
Load Indicator Resolution | 0.1% F.S. | 0.1% F.S. |
Load Indicator Accuracy | ± 0.4% F.S | ± 0.4% F.S |
Max. Sample Size | 75 mm dia X 100 mm Length | 200 mm dia X 300 mm Length |
Admit between Platen | 200 mm | 500 mm |
Loading Speed | 10 ± 2.0 mm per minute | 10 ± 2.0 mm per minute |
Power Requirement | 1 kW Single Phase 220 Volts AC | 3 kW Three Phase 415 Volts AC |
Dimensions in mm (L x W x H) | 550 x 620 x 900 | 1000 x 920 x 2100 |
Weight in kg | 180 | 650 |
The first of its kind in India, to fulfill the basic need of quality control and development for manufacturers and users of paper packaging. An electronic instrument to measure and directly indicates the Compression Strength of small cartons, Edge Crush, Flat Crush and Pin Adhesion of Corrugated Board and Ring Crush and Corrugating Medium Test (CMT) of Paper and Paperboard.
An useful equipment to determine the probable compression strength of corrugated and solid fibreboard boxes by testing the paper and paperboard used in making such boxes.
Available in Three Models
I Digital Model
II Micro Processor-based Digital Model
III Fully Automatic Model with Integrated Computerised Touch Screen Panel
Suitable to Test as per:
Flat Crush Test | Edge Crush Test | Ring Crush Test | Pin Adhesion Test | Concora Medium Test (CMT) |
TAPPI : T 808 om-92 | TAPPI :T 811 om-88 | TAPPI: T 818 om-87 | TAPPI :T 821 om-96 | TAPPI: T 809 om-99 |
FEFCO : TM 6 1986 | FEFCO :TM 8 1997 | IS:12192 (2002) | FEFCO: TM 11 1985 | IS :7263 (1994) |
IS : 4006 (Part II) 1976 | 7063 (Part II) 1976 | FCBM :19:98 | IS :4006 (Part I) 1966 |
Essential for quality control and development for consumers of corrugated and solid fibreboard, shipping containers, etc. Ascertains transport- worthiness of the container.
Operation :A box attached to a vertical column is provided with mechanism to release the resting table instantaneously. For easy adjustment of the drop heights this box is balanced by a counter-weight over a pulley. Package under test is placed on the resting table. By pressing the lever on the box, the package is allowed to fall on the platform at the bottom. The fall is straight and perfectly vertical.
The machine is sturdy and easy to operate.
Machine for larger capacity and bigger packages will be available on request.
Rotational Drop Test can be provided on request.
IS | 7028 (Part VI) 1973 |
A precise and reliable machine | |
Sturdy in construction | |
Precisely machined to International Standards | |
Fitted with angular drop arrangement for checking transport-worthiness from all angles | |
Costs less than half of the similar imported tester saves valuable foreign exchange too. | |
Facility for corner drop |
Moisture content is most critical parameter in Paper, Paperboard,
Corrugated Board, all Paper products, Solid fibreboard etc.
UBIQUE Paper Moisture Indicator is an ideal equipment to determine percentage of Moisture Content Present. UBIQUE has introduced a reliable latest technology and equally trust worthy as other UBIQUE testing equipment.
Packaging materials and Containers are subject to puncture hazards in handling and transit.
Resistance to puncture is an important parameter that deter- mines the performance of a packaging material.
The equipment is designed to give an accurate and reliable indication of the resistance offered by the packaging materi- als to puncture.
Useful for testing a wide range of materials from thin papers to thick boards and similar materials.
Indispensable for quality control and development work both for manufacturers of packaging materials and their consumers.
The equipment is made to international standards. Each machine is individually tested and calibrated in the factory.
The equipment measures the Tear Force required to tear samples of paper, board, plastic films and other similar materials.
The equipment is designed to directly read gF (Tear Force) per one piece. The Tear Force thus obtained can be converted into Tear Energy, Tear Index or Tear Factor by applying appropriate formulae.
Incision Knife of hardened and ground alloy steel. | |
Precision Clamps with controlled jaws, made of aluminium. | |
Extra light, low friction pointer with friction lining of textile material. | |
Supplied with template to cut 63 mm x 63 mm specimen. |
A scale: | 0-100 gF (when using 16 pieces) | |
B scale: | 0-200 gF (when using 8 pieces) | |
C scale: | 0-400 gF (when using 4 pieces) |
Suitable for Testing as per following Standards
TAPPI: | T 414 om-98 |
IS: | 1974-1990 |
FCBM: | 6:91 |
Technical Specifications:
Specimen size in mm | 63 x 63 |
Machine dimensions in mm (L x W x H) | 500 x 220 x 600 |
Machine weight in kg | 25 |
This equipment is extremely versatile for conducting Tensile Strength Test of paper, paperboard, etc.
It can also be useful for testing compression and tension forces.
Available in three models:
Suitable for testing as per following Standard
Supplied with 2 speed setting for conducting ECT, FCT, RCT & PAT along with necessary attchments. User can select betwwen test speed of 12.5 mm/min & 25mm/min depending on requirement of the capacity:500kgf |
UTT-P- Micro Processor Based Model | |
UTT-TS Computerised Touch Screen Model | |
UTTCR-P- Microprocessor Based Model with Crush Tester | |
UTTCR-TS-Computersied touch screen Model with crush Tester |
The transport packages in all distribution systems are subjected to varying intensities of vibrations.
Vibration Test is carried out to assess the performance of a filled package in terms of its strength or protection that it offers to its contents when subjected to vibration. This test method simulates the transport hazards, to produce an equivalent effect or damage during the test.
The equipment is suitable for testing containers of any form, material, kind, design with interior packing, means of closure and any size and weight. Maximum weight of container 50 kgs. Other capacities on request.
Machine WxDxH | 1770 mm x 1150 mm x 735 mm |
Control Panel | 550 mm x 550 mm x 1215 mm |
Railing Guard Height | 300 mm |
Standard Table | Wooden – Laminated |
Size | 1000 mm x 1000 mm |
(Bigger Table Size available on request) | |
Weight | 550 kg |
Electric Motor | 1 kW, 3 Phase, 1400 rpm |
Power | 1.25 kW 3 Phase |
Requirement | 415 Volts, Separate Neutral |
Amplitude | Fixed 25 mm |
Frequency | Variable between , 1.6 Hz to 6.66 Hz , (100 to 400 rpm) |
Vibrations | Harmonious: in Phase , • 90° out of Phase , • 180° out of Phase , Random |
The Internal Bond is used to determine the internal bond strength of variety of paper & paper board material.
Application:Paper and Paper bonds are subjected to impulse, impacts and shock loads into or out of plane of the sheet.This can cause structural failures. Test results from this test system may correlate to product failures. The test is conducted on a sandwich formed by double coated tape, paper specimen and again double coated tape. This sandwich is pressed between a flat metal anvi and an aluminum platen. A pendulum impacts on top inside of vertical face of aluminum platen causing it to displace and thereby split paper specimen. The energy absorbed in rupturing of the sample in computed by measuring the peak of the pendulum swing.
Suitable for testing as per following Standard:
TAPPI: T 569 on 07
Parallel Centronix Port to connect it to your 80 column dot matrix printer to print stored test results. |
UIBST - Ubique Internal Bond Scott Type Tester with microprocessor based digital model. |
The Dart Impact Tester is used to determine mechanical properties of packaging material such as Plastic Films, Laminates and Paper.
Dart Impact Tester The Dart Impact Tester determine the energy that causes packaging material to fail under specified conditions of impact of a free-falling dart.
This energy is expressed in terms of the weight (mass) of the dart falling from a specified height which would result in 50 % failure of specimens tested.
Steel Shaft Tip: 6.4 mm OD x 12.7 mm Long | |
Hemispherical Head: 38.1 mm ? (Diameter) |
24 Pcs of 15.0 g 0.1 g | |
05 Pcs of 15.0 g 0.1 g |
Dart Drop Height - Available upto 1524 mm | |
Specimen Holder: Manual Clamp | |
An Electro-Mechanical Mechanism for releasing the dart | |
Power: AC 220 V 50Hz 1 Ph | |
Test Range: 5 gms to 2000 gms |