Our Products
Instrumentation & Control Equipment
2 Products availableBusbar System
2 Products availableCircuit Breaker
2 Products availableRelays
2 Products availableSnack Foods
2 Products availableLamps
1 Products availableInverters, UPS & Converters
1 Products availableIndustrial Chemicals
1 Products availablePush Button Switches
1 Products availableAutomotive Components
1 Products availableOur offered Product range includes Moulded Case Circuit Breakers - EasyPact, Moulded Case Circuit Breakers - MCCB, Motor Management Systems, Air Circuit Breakers - ACB and ABL1 Power Supplies.
| GV2 15, between 0, 1 and 32 A GV2ME/GV2P: Thermal and short circuit protection / GV2LE/GV2L: short circuit protection only 10KA or 50KA GV3 8, between 9 and 80 A GV3P: Thermal and short circuit protection / GV3L/GK3: short circuit protection only 35KA, 50KA or 100kA GV7 8, between 12 and 220 A GV7RE: Thermal and short circuit protection Icu 35kA / GV7RS: Thermal and short circuit protection Icu 70A | |
| PK Plug & SocketsAvailable in different versionWander typeWall mounted typePanel mounted typeAlso, special plugs for special applicationsIP44 & IP67 versionsRange: 16, 32, 63 & 125A3P, 4P & 5P Kaedra Enclosures:Degree of Protection against external mechanical impacts acc. to EN 50102 :IK 08Resistance to fire and abnormal heat acc. to IEC 695-2-1: 850C (glow wire test) |
| 3 Models LR2 K from 0.11 A to 16A LRD from 0.1 to 150A LR9F from 30A to 630A EOCR from 0.3 to 60A Over load relays available in Class 10 and class 20 version. Compact design in 45mm width for LRD relays up to 38A. Direct mounting on contactor is possible . Accessories are available to mount relays independently. Easy fault indication by LED is possible in EOCR. Wide variety of accessories like Remote reset cord , extended STOP PB is available for quick installation. |
| Compliance with IS / IEC 60947- 3Rating : 32A to 630AOperational Voltage Ue = 415 V AC, 250 V DCUtilisation Category : AC 23A @ 415 VAC, DC 23A @ 250 VDCSuitable for both DIN and BS Fuses3P3P + Isolable Neutral4P version |
| 20A to 1000ADegree of Protection: IP55 as standardProtective earthPlug-in units compatible with fuses/ NSX MCCBsLighting buswaysKDP 20AKBA 25A / 40A (1phase & 3phase)KBB 25A / 40A (Double circuit)Low & Medium Power buswaysKNA - 40A to 160A (Aluminum)KSA 100A to 1000A (Aluminum)KSC 100A to 800A (Copper) |
| Functions & Characteristics : |
| The EasyPact CVS range is the Designed to meet the requirements of the majority of the applications, the new EasyPact CVS circuit breakers deliver a level of performance and cost-saving functionality that is unusual in their price range. Features :
|
| Compact NSX |
0.4A to 810A in three frame sizes of 8A, 27A and 100A
For requirements >100A, external CTs can be used.
Basic unit has current Protection and measurements,
and additional voltage monitoring unit for complete motor management system.
Control voltage available in 24V DC and 110-240V AC versions.
Dedicated display module LTMCU for parameter display and Setting.
Inbuilt 6 Inputs and 4 outputs for custom built Programming .
Voltage module will have additional 4 I/P available.
Inbuilt Modbus / Profibus / Can Open / Device Net / Ethernet Protocol
| Masterpact NT / NW |
NT : 630A 1600A (Single frame size) Performance Level :42/50/150kA
NW : 800A 6300A (Two frame size) Performance Level :42/65/100/150kA
3P / 4P, Fixed / Draw out, Manual / Electrical Versions
Circuit breaker & Switch disconnector versions
Conforms to IEC 60947-2 & 3 and global standards
Micrologic control units with Current, Power & Harmonics metering
Interpact switches 250 A to 630 A
Manual operation (interlocking via rotary handles, interlocking via keys)
Compact NSX/NS circuit-breakers
Manual operation (interlocking via toggle, keys, rotary handles or interlocking back plate)
Remote control operation (with or without automation)
Masterpact 800 A to 6300 A circuit-breakers
Manual operation (interlocking via keys, via rods or cables)
Remote control operation
Built-in motor mechanism
Mechanical interlocking via rods or cables
Electrical interlocking via wiring / auxiliary contacts
| PRODUCT DESCRIPTIONThe characteristics to consider when selecting a power supply are:the supply voltage available in the installation, the required output voltage and current.This may, however, result in several products being selected as suitable.Therefore, other selection criteria must be considered. Power Supply VoltageThe ABL1 range is the solution because it guarantees regulation of 3% onthe output voltage, whatever the load current and the input voltage. Inaddition, the wide input voltage range of ABL1 power supplies allows themto be connected to all voltage supplies within this range, without anyadjustment on 60 and 100 W versions, and via a selector on 150 and 240 Wversions. Short Circuit ProtectionABL1 power supplies are equipped with electronic and thermal overloadprotection. This protection resets itself automatically on elimination of thefault, which avoids having to take any action or change a fuse. Electromagnetic CompatibilityLevels of conducted and radiated emissions are defined in standardsEN 55011 and EN 55022.The products in the ABL1 range are class B, the strictest level, and can beused without any restrictions due to their low emissions. | Power FactorThe current drawn by a power supply is not sinusoidal. This leads to the existence of harmonic currents which pollute the voltage supply.Regulated switch mode supplies always produce harmonic currents; therefore, a filter circuit (Power Factor Correction or PFC) must be added to comply with standard EN 61000-3-2.ABL1RPM power supplies conform to standard EN 61000-3-2 and cantherefore be connected directly to public voltage power supplies. ABL1 regulated switch mode power supplies are designed to provide the dc voltage necessary for simple, dedicated control circuits. Divided into two families, these power supplies are able to meet all the needs encountered in standard commercial machines.These single-phase power supplies, with or without anti-harmonic distortion filtering, conform to world-wide standards. Switch mode technology guarantees the quality of the output current with regulation below 3%. As machine components, ABL1 power supplies are easy to installonly thesetup may vary from one application to another. The ABL1 range is specially designed for machine manufacturers. |
|
Rating : 800 to 3200A
Single frame size
3P/4P, Fixed/Draw out, Manual/Electrical Versions
Icu = Ics = Icw (1sec) = 50kA
Circuit breaker & switch disconnector versions
Conforms to IS/IEC 60947-2 & 3
Microprocessor based ET trip system
Type 1+2
Rated Impulse current Iimp : 12.5kA/ 25kA & 50/100kA for N/PE
Maximum discharge current Imax: upto 50kA
Voltage protection level Up < 1.5kV
Compliance with Standards : IEC 61643-1 , Type 1 as well as Type 2 tests
Type 2 withdrawable Surge Arrestors
Maximum current discharge Imax : 65kA, 40kA, 15kA, 8kA
Maximum continuous operating voltage Uc: 340V
Voltage protection level Up: 1.5kV
Compliance with standards: IEC 61643-1class 2, EN 61643-11 type 2
7 contactor sizes from 6 to 300 A
2.2 kW to 160 kW (AC3/415 V)Width from 45 mm (6 A) to 213 mm (300 A)3 polesAC control
4 thermal overload relay sizes from 0.1 to 333 A
For all TeSys E contactorsClass 10ADirect mounting under contactors
4 Key accessory types
Control: auxiliary contact blockReverser starter: mechanical interlockStar-Delta: Time delay auxiliary contact blockTerminal block for thermal overload relay
1 control relay range
3 types of control relays with 4 NO/NC contacts: 2+2, 3+1 and 4+0
Standardized Certified Solutions
IEC 60947-4-1IEC 60947-5-1CEGOST
| MCBs Widest Range: 1 to 125A Choice of breaking capacities: 10, 15, 20, & 25kA RCCBs & RCBOs Widest range : up to 125A - Sensitivity :10mA to 500mA RED Wide Range: from 25A to 100A with sensitivity of 30 & 300mA 2P & 4P Distribution Board SPN , TPN & Vertical Distribution Boards PPI DBs for installation requiring sub incomer (RCCBs) in each phase |
| |||
Pendant control stations with intuitive operation :
Double insulated, for control circuitsComplete stations ready for use, Pistol grip, type XAC AComplete stations ready for use, type XAC D
Double insulated, for power circuits (direct switching)Complete stations ready for use, type XAC D
Double insulated, for control or power circuitsEmpty enclosures, type XAC DSeparate components and spare partsVariable composition stations, factory assembled
Pendant control stations :
Double insulated, type XAC A, for control circuitsComplete stations ready for useEmpty enclosuresSeparate components and spare partsVariable composition stations, factory assembled
Double insulated, type XAC B or metal, type XAC M (1)Complete stations ready for use, type XAC B, for control circuitsComplete stations ready for use, type XAC B, for power circuitsEmpty enclosures, type XAC B, for control or power circuitsEmpty enclosures, type XAC B or XAC M, for control circuitsSeparate components and spare partsVariable composition stations, factory assembled
Double insulated, type XAC F, for control circuits (1)Empty enclosuresVariable composition stations, factory assembled
Controllers:
Controllers for light hoisting applications, type XKBControllers XKB A with predefined, non modifiable schemes, factory assembledControllers XKB E with variable and modifiable schemes, factory assembledSeparate components
Controllers for medium hoisting applications, type XKDControllers with variable composition schemes, factory assembledSeparate components
Controllers for heavy hoisting applications, type XKMControllers XKM A and XKM B with variable composition schemes, factory assembledControllers XKM C with variable composition schemes, factory assembledSeparate components
Potentiometers for controllersFor standard applications, type XKZ AFor applications requiring an extended neutral zone, types XKB Z and XKD Z
| Rated voltage : 600V in 3 Pole & 4 PoleI - LINE 2 range800A to 5000A (Aluminum)800A to 6000A (Copper)Conforms to UL857, IEC60439-1, 2, (JIS8364)5 conductor construction with integral earth bus as standardIP RatingsIP40 / 41 / 54 / 55 / 65Outdoor IP 66 (with Canopy)Busway applicationFeeder/ Rising Main & Plug-in versionsPlug-in units compatible with NSX MCCBs |
| 3 Ranges availableAutomatic DOL starter type TDL from 0.05 to 125HP in 1Ph and 3 Ph version.Automatic reversing DOL starter from 3HP to 20HP in 3Ph version.Automatic S/D starter from 7.5HP to 400 HP in 3Ph versionConforms to IEC 60947-4-1, and IS13947-4-1.Ability to withstand wide voltage variation (55% to 110%) for DOL starters up to20HP and S/D starters up to 40HP.Suitable for Humid, high temperature and tropical environment.Enclosure with dust & vermin resistant.Coordinated starter with HRC fuse. |
| Presentation of the range | ||||
| The RXM Optimum miniature relay range comprises:1) 5 A relay with 2 C/O contacts or 3 A relays with 4 C/O contacts.The relays have the same dimensions.2) Socket with mixed contact terminals.3) Metal maintaining clamps (accessories).
|
We are the main supplier of this product.
| Application : Simple machines for industry(Small Handling applications, Packing, Pumps, Fans etc.) Simple Consumer Machines(Access barriers, Medical beds, Treadmills, dough mixers etc.) Motor Power Range :0, 18.4kW | |
The range of pushbuttons and pilot lights from the house of heralds a different
beginning towards a new electric world.
The most beautiful amongst its species, the range of pushbuttons, switches & pilot lights are highly desired by those who value quality.
Its undisputed technological supremacy, along with easy to use and easier to mount features, makes them the brightest among its progenitors.
DM 1000 / 3000 Series
1 Phase & 3 Phase Digital Panel Meters5 flexible models to check the basic electrical parameters for many applications.
DM 52 Series
3 Phase Energy MeterStandalone energy meters withpulse output
| EM 6438 Dual Source Energy MeterMeter with 2 energy registers to separately record the consumption from two different sources | ||||
|
Narhe, Pune, Maharashtra 