Satguru Engineers

Sector 33, Gurugram, Haryana

'SATGURU' Mould Clamp is designed especially for low height applications only such as clamping of moulds on plastic injection moulding machines & pressure die casting machines. The Compact front portion of the clamp enables it to penetrate into the limited clamping area of the mould & clamp it. The positioning of forged swivel washer on required curved groove enables the operator to set the center distance between the clamping portion & the clamping bolt as per the nearest tapped hole available on platen (Where there are no T-Slots). No supports are required at the rear of the clamp as the rear portion rests on the platen & front holds the mould. Flanged nut is tightened on the swivel washer which takes care of the positioning of clamp body. These Clamps are equally useful on pressure die casting machines, hydraulic presses & power presses where low height clamping is done.

Low height design of these hold down toggle clamps requires less overhead clearance as the handle remains in horizontal position while clamping.
Standard Accessories provided with Clamp: Standard Hex, Head Clamping Spindle assembly is provided as standard accessory with all above clamps. U-Arm models are provided with 2 nos. U-Flanged Washers also along with clamping spindle assembly and BR-arm models are provided with bolt retainers along with clamping spindle assembly.

SATGURU' Universal strap clamp is very useful for job clamping on 'T' slot table of Drilling, Milling, Shaping, Boring, Power Press & other machine tools. No supports are required at the rear of the clamp since the body of the clamp is self-positioning as the rear part rests on the table and front holds the job. The body positions itself with the help of swivel hinge pin according to the thickness of the work piece, the T-Bolt remaining in vertical position and the nut is tightened on the flattened portion of swivel hinge pin. Clamp is supplied complete with hardened T-Bolt & special nut.

U-Clamp(Hardened & Tempered, Black Finish).

'SATGURU' Push/Pull Action Toggle Clamp - Centre Base has its base at the centre and the bigger two sizes have more centre height than the front base model to accommodate larger work pieces. Width of the mounting base is also less in this case which makes this type of push action clamp more compact. Other Features of this clamp are same as in case of front base model. Standard Accessories provided with Clamp : Standard Hex, Head Clamping Spindle assembly is provided as standard accessory.

These toggle clamps have a flanged base with holes for mounting on the fixture plate. Handle remains in vertical position while clamping. Available in two types of clamping arms as shown below:
U-Arm: - This is the most widely used type which permits to locate the clamping spindle anywhere along the length of the arm.
BR- Arm: - This type of Arm has s Strip Arm onto which the bolt retainer can be welded by the user at any desire angle. Bolt retainer is supplied loose with this model.
Standard Accessories provided with Clamp: Standard Hex, Head Clamping, Spindle assembly is provided as standard accessory with all above clamps. U-Arm models are provided with 2 nos. U-Flanged Washers also along with clamping spindle assembly and BR-arm models are provided with bolt retainers along with clamping spindle assembly.

(Hardened & Tempered, Black Finish)'SATGURU' Tapped End Clamps are straps having special threaded adjustable support at the rear which can be adjusted to required height. Most useful clamp for plastic injection moulding or pressure die casting machines where mould/die is clamped in vertical position and these clamps with screwed in adjustable support are convenient to the operator as other loose supports tend to fall down while setting. Hardened adjustable support with large diameter forged base gives rigid clamping support and ensures machine bed safety. Extra thick body of the clamp accommodates more number of threads for rigidity of screwed support. Supplied with adjustable support only. T-Bolt or Stud with Nut, Washer etc to be ordered separately.

STEPPED STRAP CLAMP (Hardened & Tempered, Black Finish) These Strap Clamps have teeth at rear matching to that of Step Blocks for the Step Blocks to be used as supports. Unlike other clamps, single piece of Step Block not a pair can be used as support with Stepped Strap Clamp