SARYUG INDUSTRIES AND SERVICES LIMITED

Connaught Place, Delhi

• Fully imported from M/s ISAL POWER SWEEPERS, ITALY, the SWEEP PB Series equipment are Self-propelled, Direct Throw Sweeping type mechanical sweepers. This advanced technology, high efficiency sweeper meets the toughest cleansing challenges.
• Depending on the nos. of brushes, the maximum sweeping capacity varies from 15, 000 to 28, 000 sq mtrs /hour.
• Available in two models and various variants, the PB170 and the PB200 come fitted with a full hydrostatic transmission system. Each model is available in:
  • Electric, LPG or Diesel engine drives One, two and three front brushes Three and four wheel chassis, and With an open, windshield and wiper and an all weather drivers cab
• The SWEEP PB Range comes fitted with:
  • A centrally located main brush
  • Front located brush/brushes
  • Specific to the model, 500 or 600 litres hydraulically lift and tilt type hopper the dump height being around 1500 mm.
  • A high volume suction fan A dust filter with an electric filter shaker for perfect dust control system
  • Fully integrated ergonomically located cab controls.

Application

• Ideally suited for a wide range of outdoor applications the SWEEP-PB Series sweepers are suitable for both municipal and private use. Being capable of picking up materials from fine sand to heavy debris, the SWEEP-PB sweepers are ideal for deployment at shopping malls, car parks, city streets to new roads. Efficiently cleans road shoulders, road dividers and pedestrian areas.
• The swept material collected in Debris Hopper is then emptied into standard height bins / containers by hydraulically lifting and tilting.

• Available in both, front and rear tractor attachment types this Tractor attached, Mechanical Road Sweeper, comes fitted with a hydraulically tilt-able Debris Hopper having a volumetric capacity of 0.25 cum. Specific to the front attachment type, the Debris Collection Hopper is capable of being hydraulically lifted to a height of approximately 2500mm to facilitate dumping of the hopper content. Fitted with an efficient dust suppressant system, the SWEEP 3AT is capable of sweeping 1850 mm of road widths in a single pass at sweeping speed of an approximate 5 to 8 Km/h. Both side and center brushes are independently and hydraulically powered by low speedhigh torque hydro-motors, and are available with PPN or alloy steel bristles. The SWEEP3ATattachment can be attached to a minimum 45 Hp, construction type Tractor.

Application

• Low in cost, the SWEEP 3AT is ideally positioned for use in small municipalities, Nagar Palikas and Parishads. The equipment sweeps and cleans with high efficiency, narrow congested roads, large parking lots and open grounds, market and commercial areas, residential blocks, townships, etc. The centrally located Main Brush positioned below and across the width of the hopper will carry out the toughest sweeping operation within its travel path. The side Channel Brush, located on one side of the equipment cleans the kerb side areas. The swept material is collected and stored in Debris Hopper which is then emptied by hydraulic tilting / tipping and tilting as per the equipment model.

• Fully imported from M/s JOHNSTON Sweepers Ltd., UK, the worlds leading manufacturer of outdoor surface cleaning equipment and integrated on locally available truck chassis, VT range of road sweepers are available in multiple Debris Tank volumetric capacities of 5 cu m, 6.5 cu mand 8 cu m, mounted on 11Tand 16TGVW chassis respectively.
• The sweeper body comprises of a debris tank, an integral water storage tank and an engine cowl. The debris tank is manufactured from stainless steel and is of a tipping design. The tank tipping and rear door opening functions are carried out hydraulically. The high dump height of 1000mm and a dump angle of around 55O, facilitates emptying of the debris into suitable open containers or standard skids which are normally located on the roads sides.
• The VT Range comes fitted with a compact and an efficient sweeping gear, comprising of the channel brush, the suction nozzle and a tilting type wide-sweep brush, designed for maximum performance and protection from damage. Atilting type Wide Sweep Brush is positioned below and across the width of the hopper. Two Side/Channel Brushes located on each side of the equipment clean the curbside areas. The suction nozzles positioned behind each Channel Brush convey the swept materials under vacuum to the debris hopper via a flexible, wear resistant rubber ducting hose.
• Both the Wide Sweep and the Channel Brushes fitted with PPN and alloy steel bristles are hydraulically operated by independent, low speed, high torque hydraulic motors.
• An efficient dust suppressant system, with fine water spraying nozzles located at the chassis front, ahead of and inside the side suction nozzles is incorporated in the sweeping system. A common feature to all models the VT range is capable of sweeping 2400mm of road in a single pass at a maximum speed of around 10Kmph.
• A dedicated, powerful diesel run auxiliary engine drives the dynamically balanced multi-vane impeller type suction blower via a step-up gearbox and a uniquely designed fluid coupling. Each vane of the fan is self cleaning and constructed of abrasion resistant plate of varied thickness, a feature which greatly reduces the risk of damage of injury in the case of failure. The complete blower and engine unit is encapsulated in a sound proof enclosure to reduce operational noise levels to an acceptable limit.
• A rear end mounted Littasnatch hose is provided with the equipment to facilitate pick up of light litter from pavements and hedges.
• With all electric & electro-hydraulic functional switches and controls housed in a master module inside the drivers cab, this high performance Road Sweeper is easy to operate and simple to maintain.

Application

Sweeps and cleans with high efficiency, city streets and roads, heavy duty work sites and is also suitable for contractor duties such as road planning and picking up debris around work sites and access roads. The swept material is collected under vacuum through the side suction nozzles and stored in the Debris Hopper which is then emptied at a disposable site by hydraulic tipping