sarja Lighting

Umred, Nagpur, Maharashtra

MAST STRUCTUR :Our high mast is a continuously tapered, polygonal cross section of at least 20 sides, presenting a good and pleasing appearance which is based on proven in tension design conforming to the Technical report.

High mast is fabricated from steel plates Conforming IS Standard, cut and folded to from a polygonal section. Masts are in two sections for 12 - 20 Mtr. and in three sections for 20 & 30 MTr. heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with a fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimination of helical stress concentration. For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanized (86 Microns) internally and externally, having uniform coating.

Three type of lamp used in sarja luminaries for illuminated to the working area i.e. Metal halide lamp(MH), High Pressure sodium vapour lamp(HPSV) & Mercury vapour lamp (MV).

Control gear box:GDC/PDC control gear box comprise a Die cast aluminum cast body with ballast, ignitor, Capacitor, Kit-kat Fuse, earthing, it is used for MH & HPSV operating on 220-240 volt ac single phase supply suitable for HPSV/MH 70 1000 watt lamp.

Integrated Control Gear Box:It is complete with ballast, ignitor and capacitor it is very easy to carry and replace from flood light fitting besauce of its compact size and light weight. it is available for both MH & HPSV lamp from 70-400watt.

Ignitor & Capacitor:It is widely used for HPSV/MH Lamp. it is very easy to carry and replace from flood light fitting because of its compact size and light weight. it is available for both MH & HPSV lamp from 70-1000watt.

CONSTRUCTION:Open construction electromagnetic ballast consisting of high quality silicon steel lamination with argon welding, super enamelled copper wire, vacuum impregnated with Wight resin, terminal black with tapping for 220-240 volt supplied suitable for HPSV, MH and HPMV lamp. It is used for 70-1000watt HPSV/MH/HPMV Lamp.

Safety jackets are typically brightly colored. Jackets that are worn for hunting safety are bright orange to allow the hunter to stand out and be visible to other hunters. Life jackets that are used in the water are generally a bright color as well, such as yellow or orange, but their primary function is to help a person stay afloat in the water. While it helps for them to be seen in the water, the flotation devices embedded in the jacket provide the main function.

PC fixture of high intensity and flexibility, anti-shock, anti-UV, solid and durable, not easy to discolor, flame-retardant.

Recommend to use PAK tricolor lamp, or T5 lamp for less energy consumption, high luminance, good CRI, long life.

Built-in PAK electronic ballast, high power factor, low harmonic content.

IP 65, streamline shape design, stainless steel clips for cover and body, easy for assemble and disassemble.

BODY / CONSTRUCTION

Simple to use, convenient, easy to carry .

Made from high quality ABS Plastic .

Long scanning area ( 410 mm long ) , for quicker detection in high traffic.

Nylon handle strap to hold it as well as Leather belted case for strapping HHMD to belt.

Total Weight of detector : 500 grams (including rechargeable battery & Leather Strap ) ( without charger )

Length of detector : 410 mm (Large scanning area)

Max width of detector : 80 mm

Max. Thickness of detector : 20 mm.

OPERATIONS

Single detection program to detect all ferrous metal and non-ferrous metals .

Detection sensitivity easily adjustable.

Easy to operate, simple operation switches :-On/ off switch

Detection mode : 2 detector has user selectable options (a) Visual + sound (b) Visual + vibration

Duration of operations under single full charge : above 50 hours.

BATTERY & CHARGER

Inbuilt Ni-mH - 9V 300 mAh Rechargeable Battery .

Life of battery : approx 1 year . Battery easily replaceable without any tools.

External battery charger 90-260 V AC , 46 - 63 Hz . Easy connection of charger with HHMD. Auto cut off to prevent battery over charging.

Low battery LED indication with auto cut off , to prevent battery from deep discharge

Suitable for temperatures from -20 deg C to 55 deg . For indoor use only.

BODY / CONSTRUCTION

Simple to use, convenient , easy to carry .

Made from high quality ABS Plastic .

Battery case : self locking aswell as screwable

Nylon handle strap to hold

Total Weight of detector : 275 grams (including rechargeable battery ) (without charger )

Total length : 420 mm

Thickness of handle : 30 mm

OPERATIONS

Single detection program to detect all ferrous metal and non-ferrous metals .

Detection sensitivity easily adjustable .

Duration of operations under single full charge : above 50 hours.

Low battery LED indication with auto cut off , to prevent battery from deep discharge.

Detection mode : 2 detector has user selectable options (a) Visual + sound (b) Visual + vibration

Easy to operate, single switch for selection of operations in any of the 3 modes :-

1. Off position

2. Vibration + Visual (LED) metal indication mode

3. Sound + Visual (LED) metal indication mode

BATTERY & CHARGER

Inbuilt Ni-mH 9V 300 mAh Rechargeable Battery

Life of battery : approx 1 year . Battery easily replaceable without any tools.

External battery charger 90-260 V AC , 46 - 63 Hz . Easy connection of charger with HHMD. Auto cut off to prevent battery over charging.

Suitable for temperatures from -20 deg C to 55 deg C . For indoor use only.

Technical specification cum Features

1) Push to On button

2) Continue Operation Mode

3) Operation in manual flash Mode

4) Operation In Timer mode

5) Operation in Upper & Dimmer

6) Auto Flasher

7) Inbuilt universal charger from 70volt to 240volt AC

8) colour LED used for Battery status, Charging status and low battery status display/Indication

9) Manual beam adjustable regulator switch