Saraswat Group Delhi

Most appropriate for heavy heating requirements of commercial cooking and industries: General & Pharmaceuticals and Dairy. Produces lovely Blue Sunflower Shaped Flame; available in two capacities. These Burners are recommended to be used at a pressure of 320 gmcm2 (4.5 psig), however this may be varied by ± 25%; the heat output being varied accordingly. These Burners are also known as M-22 or M-1 and M-35 or M-2 . Also available in model M50, M78. The rated capacity of Buners T-22 , T-35 , T-50 & T-78 is 9900 Kcal, 17300 KCal, 24200 Kcal & 38940 Kcal acordingly.

Where & when an installation is subject to the Gas Safety Installation and Use Regulations (GSIUR) Under-pressure shut-off valves which provide back-up protection should the regulator fail or the gas supply pressure falls to a dangerously low level, for example if the bulk tank becomes empty for some reason. This device may be re-set by the gas user if it trips out and shuts off the gas supply when the gas pressure drops below its set pressure value.

Terminal block To be used as a junction on table for connecting Bunsen Burner Taps. Inlet 38 Inch CU x Outlet 4 Nos. 18 Inch BSPF Inlet 38 Inch CU x Outlet 2 Nos. 18 Inch BSPF. There are individual fittings for fixing on M.S. pipeline for obtaining different types of outlets and are used to connect valves regulators and any other fittings on to the pipeline.

• Temperature-40oc to +70oc
• diameter50 mm

Compact size with high performance of pressure & air delivery and low noise level.Easy head setting due to graduated scaled. Maintenance is easily carried out without removing burner from equipment (hinged unit).

A pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe andor usable pressures for various applications ie Oxy-fuel welding and cutting, propane and LP Gas applications, Oil and Gas Industry, Mining Industry. Gas pressure regulators are used to regulate the gas pressure and are not appropriate for measuring flow rates. A pressure regulator's primary function is to match the flow of gas through the regulator to the demand for gas placed upon the system. If the load flow decreases, then the regulator flow must decrease also. If the load flow increases, then the regulator flow must increase in order to keep the controlled pressure from decreasing due to a shortage of gas in the pressure system. Thes regulators are available in Two stages first called First stage Reulator & than second stage Regulator. These regulators are available in two types the one is adjustable type & another is Preset type.