Sara offers Data Headers to provide additional connections for Pressure Gauge, thermowell, and sampling or injection ports. The Data headers allows connection of pressure and temperature monitoring equipment.

Sara can offer Data headers specific to the user requirements and with either Hammer union ends or API-6A Flange connections.

All Data Headers are supplied with complete test certificates.

Sara tongs are available in a variety of models, sizes and types to handle casings, drill collars, sucker rods and tubing including chrome tubulars.

Sara's BOP Accumulator Units meet or exceed the design specification as specified in API 16D. Each control system is specifically engineered to assure reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions. Sara welcomes the opportunity to assist you in the proper selection of standard equipment or custom design to meet your application and certification requirements.

• 2" and 3" Fig 1502 MxF with 3/4", 1", and 2" Orice
• Standard and H2S Service are used up to CWP 15, 000 psi, Tested at 22, 500psi
• Hammer Union End Connection
• Forged alloy steel body, stainless steel and tungsten carbide parts
• Suitable for a broad range of applications including wellheads, production manifolds, well testing, steam injection, choke and kill manifolds and well clean operations, etc.

The display panels currently used in the accumulator system were first designed in the 1980s. Due to the level of technology available, the panels were controlled by pneumatic, electrical or both power sources.

On pneumatic panels, control was received via valve operation of the cylinders on the Accumulator Unit. Electric lights in the panels functioned as valve indicators. Electrical panels used a system of relays and contacts that were configured to establish the valve operation logic.

Easy rig up and rig down these panels functioned well for some time, but contained various intrinsic flaws. As Accumulator Unit safety became increasingly important, the remote panels required quicker response time and the ability to log and diagnose problems before they occurred.

Accordingly, a new panel design with faster and smarter control capability was needed. Saras control keeps the best features and reliability of its predecessors, while overcoming the flaws that inherent in the older panels.

Features

• Explosion proof for Class I Div. I or Class I Div. II
• Air cooler for higher temperatures
• Logging of functions and alarms
• Air and battery back up
• Minimum rig-up time; no air hose
• System can be retrofitted on existing units
• System can set secondly pressure units
• System can set minimum and maximum gauge readings
• Time zones can be set for accurate logging
• Impact resistant IR touchscreen
• Help Screen included for diagnostics without opening the panel

Functions

• Visual indications of valve position
• Audible and visual alarm for low accumulator pressure, low manifold pressure, low rig air pressure and low reservoir fluid level
• Push buttons from open/close function with master push button for two hand operation
• Push buttons for high/low function of bypass valve
• Push buttons for raise/lower annular regulator pressure setting
• Push button for lamp test

Options

• Wireless capability for remote communications
• Permits remote monitoring of Unit Status
• Communications via Optical fiber Cable
• Screen displays with reduced sun glare
• Communication via Co-axial Cable
• Communication via Ethernet touchscreen or Gauges.

Available in sizes 3/4" through 3 " up to 15, 000 PSI non-stock cold working pressure, Sara Swivel Joints offer the following features.

• Minimum flow restriction
• Heavy duty hex head style ball loading plug
• Grease retainer ring (ensures clean ball race)
• Standard packing units (operating temperature to 225 F)
• Superior hardened ball races ensure uniform surface hardness and depth for longer life under severe thrust and radial loading
• Standard Swivel Joints are provided with API line pipe threadsOther end connections are available on request
• Available for standard and sour service
• All sizes are available in 8 styles, for 360 rotation in 1, 2 or 3 planes

High Pressure Test Units are provided in working pressure ranges from 5, 000 to 30, 000 PSI.

These units are recommended for high pressure testing of BOP stacks, choke and kill lines, Christmas trees and any other type of equipment requiring high pressure static testing. Test Units are available in unit-mounted, portable, skid-mounted and high flow electric driven styles. Accessories include stand-mounted chart recorders and high pressure hose assemblies.

Stand Mounted Recorders are available to assist with documenting test performance of equipment being tested with all styles of High Pressure Test Units. These are provided in 15, 000, 20, 000 and 30, 000 PSI models complete recording coverage.

Sara metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles. Sara manufacturers in accordance with specific tolerances on CNC machines.

Sara Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable).

Sara is authorized to monogram Ring Joint Gaskets as per API- 6A.

The units are manufactured in a variety of standard and special materials.

Prime Features

• R type (oval and octagonal) solid sections to fit standard ring joint flanges with trapezoidal grooves.
• Types RX and BX with complex beveled edge sections for wellhead pressures above 700 bar.
• Combination Gaskets - Used where two flanges of different sizes are to be joined together.
• Split Gaskets - Used where an API flange is to be joined with low pressure ANSI Flange where a spiral wound gasket is used.
• Special metal gasket made to customer specifications.

Materials

• Standard: Soft iron, low carbon steel, alloy steels F5 and 410; stainless steels 304, 304L, 316, 316L, 321 and 347.
• Non-standard: high nickel alloys, super alloy steels and other stainless grades.
• Rubber coated ring joint gaskets - soft iron metal ring joint gaskets are coated with nitrile rubber for testing wellhead assemblies and valves. Rings can be reused and do not damage flange grooves.

Sara offers Data Headers to provide additional connections for Pressure Gauge, thermowell, and sampling or injection ports. The Data headers allows connection of pressure and temperature monitoring equipment.

Sara can offer Data headers specific to the user requirements and with either Hammer union ends or API-6A Flange connections.

All Data Headers are supplied with complete test certificates.

Sara tongs are available in a variety of models, sizes and types to handle casings, drill collars, sucker rods and tubing including chrome tubulars.

Sara's BOP Accumulator Units meet or exceed the design specification as specified in API 16D. Each control system is specifically engineered to assure reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions. Sara welcomes the opportunity to assist you in the proper selection of standard equipment or custom design to meet your application and certification requirements.

• 2" and 3" Fig 1502 MxF with 3/4", 1", and 2" Orice
• Standard and H2S Service are used up to CWP 15, 000 psi, Tested at 22, 500psi
• Hammer Union End Connection
• Forged alloy steel body, stainless steel and tungsten carbide parts
• Suitable for a broad range of applications including wellheads, production manifolds, well testing, steam injection, choke and kill manifolds and well clean operations, etc.

The display panels currently used in the accumulator system were first designed in the 1980s. Due to the level of technology available, the panels were controlled by pneumatic, electrical or both power sources.

On pneumatic panels, control was received via valve operation of the cylinders on the Accumulator Unit. Electric lights in the panels functioned as valve indicators. Electrical panels used a system of relays and contacts that were configured to establish the valve operation logic.

Easy rig up and rig down these panels functioned well for some time, but contained various intrinsic flaws. As Accumulator Unit safety became increasingly important, the remote panels required quicker response time and the ability to log and diagnose problems before they occurred.

Accordingly, a new panel design with faster and smarter control capability was needed. Saras control keeps the best features and reliability of its predecessors, while overcoming the flaws that inherent in the older panels.

Features

• Explosion proof for Class I Div. I or Class I Div. II
• Air cooler for higher temperatures
• Logging of functions and alarms
• Air and battery back up
• Minimum rig-up time; no air hose
• System can be retrofitted on existing units
• System can set secondly pressure units
• System can set minimum and maximum gauge readings
• Time zones can be set for accurate logging
• Impact resistant IR touchscreen
• Help Screen included for diagnostics without opening the panel

Functions

• Visual indications of valve position
• Audible and visual alarm for low accumulator pressure, low manifold pressure, low rig air pressure and low reservoir fluid level
• Push buttons from open/close function with master push button for two hand operation
• Push buttons for high/low function of bypass valve
• Push buttons for raise/lower annular regulator pressure setting
• Push button for lamp test

Options

• Wireless capability for remote communications
• Permits remote monitoring of Unit Status
• Communications via Optical fiber Cable
• Screen displays with reduced sun glare
• Communication via Co-axial Cable
• Communication via Ethernet touchscreen or Gauges.

Available in sizes 3/4" through 3 " up to 15, 000 PSI non-stock cold working pressure, Sara Swivel Joints offer the following features.

• Minimum flow restriction
• Heavy duty hex head style ball loading plug
• Grease retainer ring (ensures clean ball race)
• Standard packing units (operating temperature to 225 F)
• Superior hardened ball races ensure uniform surface hardness and depth for longer life under severe thrust and radial loading
• Standard Swivel Joints are provided with API line pipe threadsOther end connections are available on request
• Available for standard and sour service
• All sizes are available in 8 styles, for 360 rotation in 1, 2 or 3 planes

High Pressure Test Units are provided in working pressure ranges from 5, 000 to 30, 000 PSI.

These units are recommended for high pressure testing of BOP stacks, choke and kill lines, Christmas trees and any other type of equipment requiring high pressure static testing. Test Units are available in unit-mounted, portable, skid-mounted and high flow electric driven styles. Accessories include stand-mounted chart recorders and high pressure hose assemblies.

Stand Mounted Recorders are available to assist with documenting test performance of equipment being tested with all styles of High Pressure Test Units. These are provided in 15, 000, 20, 000 and 30, 000 PSI models complete recording coverage.

Sara metallic Ring Joint Gaskets are suitable for high pressure and high temperature applications. The Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles. Sara manufacturers in accordance with specific tolerances on CNC machines.

Sara Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements (where applicable).

Sara is authorized to monogram Ring Joint Gaskets as per API- 6A.

The units are manufactured in a variety of standard and special materials.

Prime Features

• R type (oval and octagonal) solid sections to fit standard ring joint flanges with trapezoidal grooves.
• Types RX and BX with complex beveled edge sections for wellhead pressures above 700 bar.
• Combination Gaskets - Used where two flanges of different sizes are to be joined together.
• Split Gaskets - Used where an API flange is to be joined with low pressure ANSI Flange where a spiral wound gasket is used.
• Special metal gasket made to customer specifications.

Materials

• Standard: Soft iron, low carbon steel, alloy steels F5 and 410; stainless steels 304, 304L, 316, 316L, 321 and 347.
• Non-standard: high nickel alloys, super alloy steels and other stainless grades.
• Rubber coated ring joint gaskets - soft iron metal ring joint gaskets are coated with nitrile rubber for testing wellhead assemblies and valves. Rings can be reused and do not damage flange grooves.