Our Products
Drilling Bits, Chucks & Collets
2 Products availablePower Saws
2 Products availableDyes & Pigments
2 Products availableBlades
1 Products availableCorrosion And Rust Control Products
1 Products availableIron & Metal Alloys
1 Products availableSteel & Steel Products
1 Products availableOur product range contains a wide range of 60# or 250 Stainless Steel Micron Powder, 150/300# or 100/50 Stainless Steel Micron Powder, 300# or 50 Stainless Steel Micron Powder, 240# or 63 240# or 63 Stainless Steel Micron Powder and 60# or 250 Microns Powder
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
60/200 | 250/75 | 40 % Max |
200/350 | 75/45 | 30 % Max |
-350 | -45 | Bal |
Physical Properties
Apparent Density | 4.70 to 5.00 gm/cc |
---|---|
Flow Rate | 25 to 28 Sec / 50 gms |
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+150 | +100 | 5.00 % Max |
150/300 | 100/50 | Bal |
-300 | -50 | 10.00 %Max |
Physical Properties
Apparent Density | 4.00 to 4.50 gm/cc |
---|---|
Flow Rate | 20 to 24 sec / 50 Gms |
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+300 | +50 | 5.00 % Max |
-300 | -50 | Bal |
Physical Properties
Apparent Density | 4.00 to 4.50 gm/cc |
---|
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+240 | +63 | 5.00 % Max |
-240 | -63 | Bal |
Physical Properties
Apparent Density | 4.00 to 4.60 gm/cc |
---|
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
60/200 | 250/75 | 40 % Max |
200/350 | 75/45 | 30 % Max |
-350 | -45 | Bal |
Physical Properties
Apparent Density | 4.70 to 5.00 gm/cc |
---|---|
Flow Rate | 25 to 28 Sec / 50 gms |
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+150 | +100 | 5.00 % Max |
150/300 | 100/50 | Bal |
-300 | -50 | 10.00 %Max |
Physical Properties
Apparent Density | 4.00 to 4.50 gm/cc |
---|---|
Flow Rate | 20 to 24 sec / 50 Gms |
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+300 | +50 | 5.00 % Max |
-300 | -50 | Bal |
Physical Properties
Apparent Density | 4.00 to 4.50 gm/cc |
---|
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+240 | +63 | 5.00 % Max |
-240 | -63 | Bal |
Physical Properties
Apparent Density | 4.00 to 4.60 gm/cc |
---|
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
100/240 | 150/63 | 55 % Max |
240/300 | 63/50 | BAL |
-350 | -50 | 10% Max |
Physical Properties
Apparent Density | 4.50 to 4.80 gm/cc |
---|---|
Flow Rate | 20 to 24 sec / 50 gms |
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+ 200 | + 75 | 10% Max |
- 200 | - 75 | Balance |
Typical Sieve Analysis
Mesh | Micron | Wt % |
---|---|---|
+ 350 | + 45 | 10% Max |
- 350 | - 45 | Balance |