Sanjay Impex

Anugraha Layout, Bangalore, Karnataka

SafeFlor™ is a foam sheet manufactured and distributed by Sanjay Impex. It is a Floor protection sheet that provides solution for any construction related issues, mainly flooring.

Advantages

• Excellent gloss retention due to high composition of both chemicals compounds in base coat
• Finish is hard but elastic and resistant to scratch, heat and chemicals
• Can be applied in any weather condition
• Can be packed for transport after 8 hours of application
• Excellent finish with minimum number of coatings
• Lasts longer due to minimal sinkage
• Ideal for indoor finishes

Cem-FIL® 60 is a high integrity AR glass fibre chopped strand designed for premixing with other materials and the resulting mix is formed by vibration casting or other processes into molded GRC components. It can also be used as a component of repair mortars to enhance their performance.

BENEFITS

• High integrity during mixing
• Low-Tex strand
• Easy incorporation
• High performance with low dosage
• Excellent reproduction of detail
• Good level of workability
• Reduced water demand compared to other fibers
• Improves mechanical performance of GRC elements
• Makes highly durable GRC elements
• Safe and easy to handle

APPLICATIONSThe high integrity of the product makes it suitable for use in a variety of production processes including vibration-casting, pumping, spraying, or dry-blending with other materials.
Cem-FIL® 60 chopped strands are designed for ease of incorporation even at high dosage and remain integral during mixing. It is used in the manufacture of repair mortars, standard GRC components such as drainage channels or meter boxes, or in architectural applications such as decorative screen walling and ornate moldings.
Cem-FIL® 60’s hydrophobic behavior makes the mix more fluid and that ensures better compaction and easier release of trapped air.

Anti-Crak® HD (High Dispersion) is an engineered AR-glass chopped strand designed for mixing in concrete and all hydraulic mortars. The fibers are manufactured with high Zirconium content in compliance with ASTM C1666/C 1666/M-07 and EN 15422 and under the recommendations of PCI and GRCA.

ADVANTAGES :

• High dispersion (220 million filaments per kg, 100 million per lb)
• Excellent workability
• Invisible on the finished surface
• Does not corrode
• Control and prevention of cracking in fresh concrete
• Overall enhancement of durability and mechanical properties of concrete
• Effective at very low dosage
• Homogeneous mix
• Safe and easy to handle

APPLICATIONAnti-Crak® HD fibers are typically used at low addition level to prevent cracking & improve the performance of concrete, flooring, renders or other special mortar mixes. They incorporate easily into mixes creating a tridimensional homogeneous network of reinforcement in the matrix.
Anti-Crak® HD fibers can be added at the central mixing plant to the wet concrete mix; or directly into the ready-mix truck.
Anti-Crak® HD fibers do not protrude through the surface and require no additional finishing procedures. The reinforcement is incorporated in the concrete mass and is invisible on the finished surface.

It’s a Woven mesh coated with PVC. Fiberglass screening is Flexible, economical and easy to install screening. It will not crease, dent or unravel. Fiberglass mesh is also more opaque than aluminum mesh, allowing for greater visibility. Its attractive appearance and easy installation allows for a wide variety of applications – including windows, doors, porches, gazebos and screen rooms – while maintaining an appropriate level of air transfer. Fiberglass is the most commonly used screening for new construction.

ADVANTAGES :

• Corrosion Resistant /Flexible
• High Strength
• Fire resistant
• Prevent Common Pests like Flies & Mosquitoes from entering your home
• Easy to fix with Velcro tapes
• Colors Available (Grey, Black, White & Ivory)
• Size Available (3’ 4’ 5’ Width) (Each Roll is 30Mts)

Sanjay Impex now provides high quality products from INDONET® Plastic Industries, a recognized and reliable organization that manufactures, imports and supplies various kinds of extruded plastic mesh & related products since 2007.
INDONET Protective Sleeves/Threaded Protectors are manufactured from a special blend of material to provide “soft” elastic cushining characteristics to protect the part surfaces from damage, chipping and abrasion during handling and transport.

ADVANTAGES

• Made from high-grade polyethylene
• High elasticity & tensile strength
• Easy to apply on irregular parts
• Protects from chipping, abrasion & corrosion
• Reusable & long lasting

APPLICATIONS

• Engineering components like gears, shafts, dyes & tools
• Automobile & industrial engineering spares
• Gas cylinders, bottling
• Filtration

With Hydroplus waterborne coatings, the life of coated wood joinery has considerably increased. These products are designed for the reduction of water absorption and protection from the sun’s radiation and they ensure several advantages in terms of outdoor resistance and solvent emission reduction.
Durability of these products on outdoor exposure joinery is superior. Unlike solvent products, waterborne products maintain their elasticity over time, which allows the coating’s film to follow the wood’s movement without cracking or flaking.
Waterborne coatings are not flammable, can be thinned with tap water, allow fast coating systems without spontaneous combustion and lifting.

Advantages

• Low impact on the environment
• Not flammable
• Equipment can be washed with water
• Short drying time
• Durability on outdoor exposure
• Gloss retention
• Non-yellowing film
• Resistance to skin formation
• Maintains its elasticity on ageing
• Lifting resistance (over-coatability)
• No spontaneous combustion
• Topcoats high thixotropy

Our wide range of quality products available in the hook and loop tape fasteners are as follows:

• Sew on hook and Loop tape fasteners.
• Pressure sensitive Hook and Loop tape fasteners (Self adhesive tape).
• Hook and Loop tape fasteners flame retardant variety.
• Pressure sensitive Hook and Loop tape fasteners (Flame retardant variety).
• Hook and Loop tape fasteners Multicolor variety.
• Embossed loop tape.
• Back to back Hook and Loop tape fasteners.
• Side by Side Hook And Loop Tape Fastener.

We are also continuously upgrading our products. Through the immense expertise we have in research and development, newer varieties and special products are being continuously developed.

Vboard, a non-asbestos fiber cement board , manufactured by Visaka Industries Ltd. offers unmatched quality, aesthetics, style and durability. An ideal choice for smart, good looking interior and exterior applications, Vboard is fire, water and termite resistant and has the functional efficiency and workability as timber/plywood.
The Vboard is made with world-class technology as its backbone. Superior grade cellulose fibers, cement and inorganic binders of sileceous base are used in the making of Vboard. The matrix once prepared is cured at high pressure and temperature in autoclaves to achieve strength.

The Vboard Advantage

• Green building product, hence energy saver
• Low thermal conductivity value, good insulation
• Termite and fungus resistant
• Water resistant
• Fire resistant
• Excellent workability
• Dimensionally stable
• Vast range from 4mm to 25mm thickness
• Medium density – more than 1200 Kg/Cu.Mtr
• Strength of cement and workability of plywood/wood

Vboard Applications

• Pre-fabricated houses/porta cabins
• Partitions in offices, malls, commercial establishments
• Industrial partitions
• Acoustic partitions
• Fire rated partitions
• External cladding/facade
• False ceiling -‘T’ grade system
• False ceiling – concealed grid system (jointless)
• Mezzanine floor / raised floor / access floor
• Wet area lining and partitions
• Wall panelling
• Kitchen cabinets & shelves
• Wardrobes
• Doors and door panel inserts
• Roof underlay
• Fixed furniture

Advantages

• Resists black streaks
• Retains color granules
• Special asphalt sealant holds shingle to roof
• Wind warranty upto 60mph
• Reflects damaging solar rays

Nexgen™ utilizes a blend of Flexor™ asphalt with post-consumer recycled polymers. The use of recycled polymers is the next step in the ongoing effort from Malarkey to promote sustainable roofing materials while maintaining a high level of quality. This progressive approach improves asphalt flexibility, granule adhesion, cold weather installation, and impact resistance while promoting sustainable product design. adhesion, cold weather installation, and impact resistance while promoting sustainable product design.

Advantages

• Nextgen™ polymer modified asphalt
• Protection from extreme weather
• Resists black streaks
• Retains color granules
• Formulated roofing sealants
• Superior shingle strength
• Improved fastner placement
• Flexible in all weather conditions
• Wind warranty upto 110mph

Highlander® NEX™ AR (algae-resistant) is an architectural shingle engineered with industryleading, sustainable NEX™ Polymer Modified Asphalt Technology (PMA), which combines high-grade asphalt (weathering) with advanced polymers (strength, flexibility) and upcycled materials (durability, sustainability) to rubberize the shingle for exceptional all-weather performance, superior granule embedment, and longer product life.

Advantages

• Reduces Smog
• Upcycles Materials
• 5-10 year algae warranty
• Up to 177kph wind warranty
• Fire and Weather resistant
• Resists impact