Verified
Write a Review
Our Products
Heat Exchangers
2 Products availableIndustrial Valves
1 Products availableGenerators
1 Products availableGenerators, Turbines & Power Plants
1 Products availableFast Food And Beverages Machines
1 Products availableCleaning Wipes & Liquids
1 Products availableDust Collectors
1 Products availableLevel Controllers
1 Products availableWe offer a complete product range of Riello Burner Photocell, Gas Air Heaters, Electrode Cap, Diffuser Plate and Indian Gas Controller
With firm commitment to quality, we are engaged in offering Heat Recovery Unit. These products are designed to recover the heat reduced or lost due to the passage through the chimneys. Our procuring agents source the raw material for the equipment from trusted vendors in the industry. Post production, these heat recovery equipment are tested on varied parameters to ensure their flawlessness.
We bring forth an impregnable range of indirect hot our generators. The combustion chamber fabricated out of the stainless steel, a flue gas outlet, automatic fuel oil or gas fire burner control panel and a ventilation blower. Hot air generators are available with the various options for diesel, gas, pallet fire, solid fuel firing such as coal, wood and others.
We offer these high grade indirect fired shell hot air generators as per the variegated required of our international clients. This high grade indirect fired hot air generator is highly durable, reliable and efficient.
Json, hot air generators consist of a shell and tube type heat exchanger which is duly insulated to prevent radiation losses. The ventilation blower fitted alongside blows fresh air over the combustion chamber and the set of smoke tubes. In oil / gas fired options, an imported mono-block type fully automatic burner is provided for combustion of fuel.
Hot Air Generators can also be offered in solid fuel firing options. A dust-proof, pre-wired control panel is also supplied as a standard supply to control the operation of the unit based on customer requirements.
HEATING ADVANTAGES:
| Detail | Units | JAH50 | JAH100 | JAH150 | JAH200 | JAH300 | JAH400 | JAH600 |
|---|---|---|---|---|---|---|---|---|
| Output Capacity | Kcal/Hr | 50.000 | 1.00.000 | 1.50.000 | 2.00.000 | 3.00.000 | 4.00.000 | 6.00.000 |
| Hot Air Temp. (Max.) | 225 | 225 | 225 | 225 | 225 | 225 | 225 | 225 |
| Process Air Flow at STP | - | - | - | - | - | - | - | - |
| 1.2 KG2 Air Density | M/2Hr (80.C) | 3500 | 7000 | 10500 | 14000 | 21000 | 28000 | 35000 |
| - | M/2Hr (120.C) | 1945 | 3890 | 5835 | 7780 | 11670 | 15560 | 19670 |
| - | M/2Hr (150.C) | 1460 | 2920 | 4380 | 5840 | 8760 | 11680 | 14580 |
| Thermal Efficiency | % | 90% ±2% | 90% ±2% | 90% ±2% | 90% ±2% | 90% ±2% | 90% ±2% | 90% ±2% |
| Max Fuel Consumption (HSD) | Kg/Hr | 5.5 | 11 | 16.5 | 22 | 33 | 44 | 64 |
| Total Electric Load | KW | 2.5 | 4 | 6 | 8 | 12 | 16 | 24 |
| Temperature Control | Automatic | Automatic | Automatic | Automatic | Automatic | Automatic | Automatic | Automatic |
| Electric Supply | 415±6% 50HZ±3%, 4 Wire | |||||||
Our reputation in the market is largely attributable to our best quality range of vegetable Fluid Heater. At our well-equipped manufacturing unit, this heater is made using quality assured components and latest techniques. Offered heater is passed through several quality parameters to assure its quality by our quality controllers. This heater is available for our valuable clients at industry leading prices.
Thermic fluid (hot oil) heaters are used in many industrial applications where efficiency and accurate temperature control between 100 C and 350 C are required. They work in a way of heating directly fluid in the pipes with the high temperature smoke. With the help of forced circulation oil pumps, the fluid with low temperature will come back to the heater from the heat-required equipments (like dryers) and is re-heated again. The shell plate is made of Q235-A/B steel plate. The outside insulation is aluminium silicate fiber felt with thickness of 150 mm. The heater is packed by 0.5 mm stainless steel sheet. OLYMSPAN has many years experience in this field and we offer can a broad range of products, service and support.
We are able to offer an unmatched range of Wet Scrubber to respectable clients. These products offered by us are made using high grade raw material and latest technology in strict compliance with the industry laid norms and standards. Along with this, the offered range is known for handling and curbing the toxic fumes from numerous industrial processes.
ADVANCE ADVANTAGE OF WET SCRUBBER
We are a renowned enterprise, which is engaged in delivering Dust Collector. The offered range is made utilizing high grade raw material and sophisticated technology in strict compliance with the highest quality norms and standards. These dust collectors are ideal for blowing the dust that is pulled from the bag section within a specified area.
We are a leading firm, which is offering Mobrey Level Controller. These magnetically operated controllers are available in the vertical type for float chambers. Along with this, the offered range is ideally used for external mounting on steam boilers and pressure vessels. The offered range possesses primary permanent magnet, which is embedded to the float rod. This rod slides vertically inside a non-magnetic stainless steel center tube. Then, and this tube transfers the movement of the float to a secondary magnet in all the switch unit with a snap action.
Json, hot water generators consist of a shell and tube type heat exchanger which is duly insulated to prevent radiation losses. The ventilation blower fitted alongside blows fresh air over the combustion chamber and the set of smoke tubes. In oil / gas fired options, an imported mono-block type fully automatic burner is provided for combustion of fuel.
Hot water Generators can also be offered in solid fuel firing options. A dust-proof, pre-wired control panel is also supplied as a standard supply to control the operation of the unit based on customer requirements.
HOT WATER GENERATOR APPLICATIONTextile Industries
Hotel Industries
Powder Coating
Food Industries
Paper Industries
Sugar Industries
Pharmaceutical Industries
Hospitals & Institues
| Detail | Units | JHW-50 | JHW-100 | JHW-200 | JHW-400 | JHW-600 | JHW-800 | JHW-1000 |
|---|---|---|---|---|---|---|---|---|
| Head Output | Kcal/Hr | 50000 | 100000 | 200000 | 400000 | 600000 | 800000 | 1000000 |
| Outlet Temp (Max.) | "C | 90 | - | - | - | - | - | - |
| Fuel Consumption | Kg/Hr | - | - | - | - | - | - | - |
| Diesel/L.D.O. | 2.5 | 4.5 | 16 | 32 | 45 | 65 | 85 | |
| Gas/L.P.G. | 2.0 | 3.5 | 14 | 28 | 40 | 56 | 70 | |
| Wood | 14 | 25 | 50 | 100 | 150 | 200 | 275 | |
| Thermal Efficency | % | Diesel & Gas 95%, Wood 75% | ||||||
| Burner Control | On/Off | High/Low | ||||||
| Electric Supply | 220 Volt Single Phase | 415 Volt, 3 Phase | ||||||
| Water Pump Motor | KW | 0.75 | 1.5 | 2.25 | 3.75 | 5.5 | 7.5 | 11.25 |
| Blower/Burner Motor | KW | 0.37 | 0.37 | 0.75 | 1.5 | 2.25 | 3 | 3.75 |
| Total Electric Load | KW | 1.125 | 1.87 | 3.75 | 6 | 8.63 | 12.75 | 16 |
| Overall Dimension | LxWxH | 1500x1200x1500 | 1500x1200x1500 | 1500x1200x1500 | 1700x1500x1300 | 2000x1600x2700 | 2200x1650x3000 | 2500x1750x3500 |
| Dry Weight (Approx.) | KG | 400 | 600 | 850 | 1300 | 1800 | 2200 | |
Specially designed Stainless steel batch fryers with multiple inlet for oil and filtration system, the shape of the batch fryer can be rectangular or circular. Circular Batch fryers are available in various sizes, Tilting type facility for stainless steel basket for easy removal of the product thereby reducing the oil in the product substantially. Heat Exchangers are inbuilt in the batch fryer there by two way heating of oil is possible.
Oil heated which is passing through the stainless steel tubes indirect heat type
Oil heated which is kept in the frying pan (kadai by direct heat)
INDIRECT HEAT TYPE BATCH FRYERRectangular or circler indirect heat type batch fryer is fabricated in stainless steel 304 body having pan is mounted on a stainless steel 304 body. The pan is having multiple opening for oil inlet from one side and outlet from the other side, the flow of oil is regulated by an oil circulating pump. The heated oil in the pan is coming from the heat exchanger and going out into the bucket type filter from the side of the pan. The pan is properly insulated from the bottom to avoid heat loss. Continuous bucket type filters for filtering the edible oil continuously. The indirect heat type frying system is connected with digital temperature controller and control panel. The unique feature of this fryer is its tilting system that enables unloading of products in a single stroke after frying for uniform and consistent product quality.
Chandrabhushan Gupta (Json Enterprises)
Khasra No. 1087, Street No 2, C-Block, Vikash nagar, Delhi Meerut Road, Ghaziabad, Delhi Merrut Road, Uttar Pradesh - 201001, India
Share us via
View Contact Number 
