Our Products
Boats
2 Products availablePVC, HDPE, FRP & Plastic Pipes
2 Products availableHDPE Pipe
2 Products availableOur product range contains a wide range of Plastic Geomembrane Sheet, PP Sheet for Orthopaedic, PP Copolymer Sheet, POLYPROPYLENE (PP) and NovaLene PP Sheets
Polypropylene (PP) is a thermoplastic from the polyolefin group. It is a semi-rigid, translucent polymer with good toughness and weather resistance properties, low water absorption and is easily moulded to desired shapes. PP is a largely non-polar, partially crystalline thermoplastic with a crystallinity of 60 to 70% and a density of 0.90 to 3 0.91 g/cm which is amongst the lowest for all plastics. It is generally available in three advanced forms:
|
PP-C | PP-H | PP-R | PP2222 | |||
Specific gravity (ρ) | ISO 1183 | 3 g/cm3 | 0.91 | 0.9 | 0.909 | 0.912 |
Max. permissible service temp | °C | 0 to 75 | 5 to 100 | 5 to 100 | 5 to 100 | |
Tensile strength at yield (σS) | ISO 527 | Mpa | 26 | 31 | 26.1 | 26 |
Elongation at break (εR) | ISO 527 | % | - | ≥ 400 | ≥ 400 | ≥ 400 |
Impact strength (an) | ISO 179 | 2 kJ/m2 | No Break | No Break | No Break | No Break |
Modulus of elasticity (Et) | ISO 527 | Mpa | 1200 | 1400 | 1200 | 1200 |
Coef. of linear therm. expansion (α) |
DIN 53752 | K-1 x 10-4 | 1.5 | 1.5 | 1.5 | 1.5 |
Vicat Softening Temp | ISO306 | OC | 148 | 150 | 131.3 | 148 |
Shore Hardness | ISO 868 | Shore D | 67 | 70 | 60 | 67 |
|
Thickness (mm) |
Width x Length (m) |
Packing |
0.2 - 1 | - | 10 Rolls |
2 | 1.5 x 20 1.22 x 2.44 1.25 x 2 1.5 x 3 |
10 Rolls |
3 | 10 Rolls | |
4 | 10 Rolls | |
5 | 4/5/6/8 nos | |
6 | 4/5/6 nos | |
8 | 3/4/5 nos | |
10 | 1.22 x 2.44 1.25 x 2 1.25 x 3 1.5 x 3 |
2/3/4/5 nos |
12 | 2/3/4 nos | |
15 | 2/3 nos | |
20 | 1 nos | |
25 | 1 nos | |
30 - 200 | 1.25 x 2 | 1 nos |
NovaLene-H Sheets are made from Advanced Grades of PP primarily to suit applications of high temperature or high chemical corrosive conditions. PP-H is exceptionally resistant to strong acids even at high temperatures and also highly resistant to alkalis & oxidizers. It can be welded & thermoformed, has a high strength-to-weight ratio, easy to fabricate, economical, & a long track record of success for the manufacture of tanks, tank hoods, ducts, scrubbers, accessories etc. It is a preferred materials of choice for quality engineering plastic component fabrication. We offer a full range of piping systems from the same raw material. Features & advantages of NovaLene-H PP-H Sheets:Excellent Chemical ResistanceHigh Thermal ResistanceExcellent Fusion CapabilitiesHomogenous structureExcellent Fatigue ResistanceHigh Impact StrengthHigh Stress Crack ResistanceLow density, Low weightExcellent Dielectric propertiesGood ElasticityNon Toxic, Food GradeGood Thermal insulation Engineering PartsClean Room ApplicationsChemical StorageCaustic Cleaning & PicklingGalvanizing Tanks, EtchingPharmaceutical LinesDairy ProcessingWater ManagementMetallurgyFume CupboardsAnodizingOrganic ChemicalsFDA ApplicationsWire & Strip ProcessingOil DistributionPhosphating, Electroplating barrels |
Thickness (mm) |
Width x Length (m) |
Packing |
0.2 - 1 | 1.5 x 20 1.22 x 2.44 1.25 x 2 1.5 x 3 |
10, Rolls |
2 | 10, Rolls | |
3 | 10, Rolls | |
4 | 10, Rolls | |
5 | 4/5/6/8 nos | |
6 | 4/5/6 nos | |
8 | 1.22 x 2.44 1.25 x 2 1.25 x 3 1.5 x 3 |
3/4/5 nos |
10 | 2/3/4/5 nos | |
12 | 2/3/4 nos | |
15 | 2/3 nos | |
20 | 1 nos | |
25 | 1 nos | |
30 - 200 | 1.25 x 2 | 1 nos |
NovaRene PS Sheets are made from polystrene which is an aromatic polymer made from aromatic monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum by the chemical industry. Polystyrene is one of the most widely used kinds of plastic. Solid polystyrene in forms of sheets etc is used, for e.g, in disposable cutlery, plastic models, CD and DVD cases, and smoke detector housings. The two different grades of PS , GPPS and HIPS offer a variety of solutions and are chosen depending on impact resistance required in the sheets. High impact polystyrene can be assembled with mechanical fasteners, solvents, or adhesives. HIPS is FDA compliant for use in food processing.
|
Standard Sizing
NovaRene Polystyrene sheets are available in the following and variations:
Thickness (mm) |
Width x Length (m) |
Packing |
0.1 - 1 | 1.1m Wide X Roll | Roll form |
1.1 - 2 | -do- | |
2.1 - 3 | Roll & 1.0X 2.5M | |
4 | 1 X 2.5 1.22 X 2.44 |
10 nos |
5 | ||
6 |
|
Thickness (mm) |
Width x Length (m) |
Packing |
1 | 4 x 8 3 x 6 |
5 pc |
2 | ||
3 | ||
4 | ||
5 | ||
6 | 1 pc | |
8 | 1 pc | |
10 | 1 pc |