Our Products
Boats
2 Products availablePVC, HDPE, FRP & Plastic Pipes
2 Products availableHDPE Pipe
2 Products availableWe offer the best product range of PVDF Elbow, SanGrip T- Rib Liner Sheet, Dredging Pipe, T-Rib Liner Sheet and PPH Bend.
| Pipe Size Outer Diameter | Outer Dia OD | Inner Dia ID | Length | Approx. Weight (Set of 2) | Assured Net Buoyancy (Set of 2) | Pieces 40" HC | |
| Mm | Inches | Mm | Mm | Mm | kgs | kgs | Sets |
| 250 | 10 | 750 | 260 | 750 | 34 | 225 | 144 |
| 315 | 12 | 850 | 325 | 1100 | 54 | 425 | 70 |
| 355 | 14 | 850 | 365 | 1100 | 54 | 400 | 70 |
| 400 | 16 | 850 | 410 | 1100 | 54 | 375 | 70 |
| 450 | 18 | 850 | 460 | 1100 | 54 | 350 | 70 |
| 450 | 18 | 1175 | 460 | 1100 | 100 | 785 | 40 |
| 500 | 20 | 1175 | 515 | 1100 | 100 | 785 | 40 |
| 560 | 22 | 1175 | 575 | 1100 | 100 | 735 | 40 |
| 630 | 24 | 1300 | 650 | 1300 | 140 | 1050 | 36 |
| 650 | 26 | 1300 | 685 | 1300 | 150 | 1000 | 36 |
| 700 | 28 | 1550 | 715 | 1300 | 200 | 1600 | 22 |
| 750 | 30 | 1550 | 765 | 1300 | 200 | 1525 | 22 |
| 800 | 32 | 1700 | 820 | 1300 | 355 | 2825 | 8 |
| 900 | 36 | 1700 | 920 | 1300 | 345 | 2715 | 8 |
features:-
1. High impact polyethylene floats.
2. No accessories required
3.Simple slip on design
4. Used mostly with large-sized MS pipelines .
5. PU foam filling option also available.
6. Superb flexible system for rough sea conditions.
7. Excellent weathering and UV resistance.
8. Colour options available
9. Homogenous structure
10. Very good fatigue resistance.
11. Marine grade raw materials and eco friendly PU filled.
Applications:-
1. Dredge Pipe Lines
2. Marine Hoses
3. Cable Hoses
4. Aquaculture breeding area cages
5. Swimming pool markers
6. Ocean filth blockers
features:-
1. High abrasion and corrosion resistant pipes.
2. Pipes made from advanced PE grade materials.
3. Pipe materials are UV stabilised for usage in harsh marine environments.
4.Superb flexible system for rough sea conditions.
5. Pipes are duly coupled with flanges and stubends on both ends.
6. Gaskets and galvanised nuts and bolts enable easy fitment.
7. Pipes are available as per ISO 4427 with PE 100 grade. and IS4984 standards.
8. Pipes available as per IS4984 stndard have grades PE63, PE80 and PE 100.
9. Homogenous structure.
10. Very good fatigue resistance.
11. Variety of fabricated fittings, manifolds and connection joints available.
features:-
Applications:-
Kleanchute Debris Chutes are made from High Molecular High Density Polyethylene (HMHDPE) and are offered in much higher thickness than other leading chutes. The hoppers are made with galvanized steel for extended life and use in cities where corrosion levels are normally higher. In tropical climates where humidity and therefore corrosion levels are high, HDPE provides a distinct advantage of being a high durable plastic. Further the abrasion levels of HDPE is several times superior to metal and cheap drums and therefore offers multiple use of the same chute at different projects.
Features of the Kleanchute Debris Chutes:
Large 24" Inside Diameter
Thicker, More Resilient HDPE
High Abrasion Resistance
Higher thickness for longer life.
Safe, Easy, And Quick To Install
Pays For Itself In 2 To 3 Uses
Extremely Flexible System
Hardware Is Galvanized
Sections Are Telescopic For Ease Of Storage And Transport
Intermediate Intakes Can Be Easily Placed Anywhere Along Chute
Application areas:
Roofing
Renovation
New Construction
Complete System For Your Every Need:
Window / parapet mountable
Scaffold Mountable
Flat Roof Mountable
Standard Accessories include:
Telescopic HMHDPE 24" chute body
Floor Intake Hopper
Holding Frame Bracket
Galvanized Rods for floor connections
We also offer chutes constructed from HDPE pipes suitable for building up to 100 floors.
| KYNAR Polyvinylidene Fluoride (PVDF), the homopolymer of 1, 1-difluoroethylene, is a tough engineering thermoplastic that offers a unique balance of performance properties. The unique structure of alternating units of methylene and difluoromethylene, create a polymer with high crystallinity combined with a high polarity, resulting in a sharp melting point. It has the characteristic stability of fluoropolymers while retaining the properties of a conventional thermoplastic material. KYNAR FLEX resins are a series of PVDF based copolymers, similar to KYNAR homopolymer resins in purity and chemical resistance, but having additional chemical compatibility in high pH solutions, increased impact strength at ambient and low temperatures, and increased clarity.
|
| Kynar ® 740 |
Kynar ® 720 |
Kynar ® 2850 |
|||
| Specific gravity (ρ) | ISO 1183 | g/cm3 | 1.78 | 1.78 | 1.78 |
| Max. permissible service temp | °C | -30 to 140 | -30 to 140 | -30 to 140 | |
| Tensile strength at yield (σS) | ISO 527 | Mpa | 50 | 52 | 35 |
| Elongation at break (εR) | ISO 527 | % | ≥ 50 | ≥ 50 | ≥ 50 |
| Flexural strength (σB 3,5%) | ISO 178 | Mpa | 80 | 80 | 80 |
| Modulus of elasticity (Et) | ISO 527 | Mpa | 2000 | 2200 | 1000 |
| Coef. of linear therm. expansion (α) | DIN 53752 | K-1 x 10-4 | 1.2 | 1.2 | 1.5 |
| Volume resistivity (ρD) | VDE 0303 | Ω x cm | ≥ 1013 | ≥ 1013 | ≥ 1013 |
|
|
| Concrete LiningPrecast Concrete pipesTunnelsBasement ProtectionPulp and PaperAcid Picking TanksManholesBleach Storage TanksFertilizer Storage TanksChemical Waste LinesGalvanizing TanksDigester TanksConcrete Ceilings in Corrosive areaGrit ChambersAlum Storage |
|
| Thickness (mm) |
Width x Length (m) |
Packing |
| 0.2 - 1 | 1.5 x 20 1.22 x 2.44 1.25 x 2 1.5 x 3 |
10 to 25 pcs or Roll form for up to 6mm |
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | 4/5/6/8 pc | |
| 6 | 4/5/6 pc | |
| 8 | 1.22 x 2.44 1.25 x 2 1.25 x 3 1.5 x 3 |
3/4/5 pc |
| 10 | 2/3/4/5 pc | |
| 12 | 2/3/4 pc | |
| 15 | 2/3 pc | |
| 20 | 1 pc | |
| 25 | 1 pc | |
| 30 - 200 | 1.00 x 2 | 1 pc |
NovaTherm ABS sheets are made from Acrylonitrile Butadiene Styrene (ABS) which is the polymerization of Acrylonitrile, Butadiene, and Styrene monomers. Chemically, this thermoplastic family of plastics is called "terpolymers", in that they involve the combination of three different monomers to form a single material that draws from the properties of all three. ABS possesses outstanding impact strength and high mechanical strength, which makes it so suitable for tough consumer products. Additionally, ABS has good dimensional stability and electrical insulating properties.
Features & advantages of NovaTherm ABS Sheets:
Can be easily thermo or pressure formed, sheared, sawed, drilled, cold stamped
Weldability ultrasonic / thermo / chemically
Excellent impact resistant
High strength & durability
Good machinability
Good electrical properties
High mechanical Strength
| Typical applicationsSuitcase BodyBus Body BuildingStorage casesSanitary WareProduct holders & ContainersPoint-of-purchase displaysDisplay componentsModels and prototypesMachine housings, guards, and coversInstrument panelsThermoformed trays and bins |
| Standard Sizing NovaTherm ABS sheets are available in the following and variations:
|
| novafab sheets are engineering plastics sheets which are backed with a polyester or glass fabric layer on one side during the production process. The bondng of the fabric to the sheet is of excellent quality as the fabric incorporates itself into the sheet while it is still hot. The peel strength thus provided is very strong. The dual layer construction sheets are used in a variety of applications primarily where fibre reinforcement is required, the sheet acts as a liner. Decorative cloths are also available for fancy thermoformed items or orthopaedic articles for children. features & advantages of novafab fabric backed sheets:good peel strength due to heat bondingease for direct fibre reinforcementoriginal properties of base plastic available for chemical resistancedecorative options availablefinal frp reinforcement gives component good mechanical strengthglass & polyester backed options available typical applicationschemical storage tankscover strips, baffles, stack seperatorsliner for gas lines, other lining jobschemical flooringinsulationscrubbing systemsfume hood ductslining of tanks and vesselsstackerschemical process equipmentsdoors and body panels |
| Standard Sizing NovaFab masking sheets are available in the following and variations:
|
|
| features & advantages of novaweld & novastic rods:standard sizing for compatibility with all welding equipmentbest weldabilityvariety of shapes and colours to suit the joblight weight material and convenient packing optionsgood machineabilityno porosity issues
|
| NovaWeld ® | ||
| Thickness (mm) |
Width x Length (m) |
Packing |
| 1 | 1m or continuous lengths |
3 kg 5 kg 7. 5 kg 13.5 kg Custom |
| 2 | ||
| 3 | ||
| 4 | ||
| 5 | ||
| 6 |
||
Polyethylene is a thermoplastic polymer consisting of long chains produced by combining the ingredient monomer ethylene. The ethylene actually converts to ethane as it takes its place in a polymer and straight sections of the polymer are the same structure as the simple chain hydrocarbons, e.g., propane, decane and other straight single-bonded carbon chains. As with any polymer, the structure of the resulting substance defies molecular description due to cross branching of the chains.
HDPE (High Density polyethylene) is defined by a density of greater or equal to 0.941 g/cm3. HDPE has a low degree of branching and stronger intermolecular forces and tensile strength.
Features & advantages of PE:
Suitable for underground pipes through adjustment to local ground movement
Impact-resistant and tough.
Thermal resistant Application possible between -40C & 80C
Smooth internal wall Low blockage risk due to low deposit / residue effects
Application in open air unrestricted through colouring with carbon black
Lower cost due to relative long life
Non conductive
Suitable for transport of polluted waste water
No condensation possible during short periods of cooling
Easy installation using butt-welding and electro-fusion techniques
Environmental friendly
Homogeneous welded joints - Pull tight and leak proof
Prefabrication = Fast and cost-saving installation
Light in weight = Cost saving in transport and handling
| PE piping systems, sheets and roto moulded products have versatile usage on several different industries from simple usage in agricutlture to high end use in Chemical Industries. MunicipalIndustrialMarine / DredgingAgricultureElectricalRecreationInfrastructureGeo Thermal HeatingAquacultureCulvertsVentilationFloat docksResidentialSanitation |
| HDPE | MDPE | LDPE | PEUHMW | |||
| Specific gravity (ρ) | ISO 1183 | g/cm3 | 0.95 | 0.938 | 0.925 | 0.93 |
| Max. permissible service temp | °C | -50 to 90 | -50 to 85 | -50 to 60 | -50 to 90 | |
| Tensile strength at yield (σS) | ISO 527 | Mpa | 27 | 20 | 11 | 17 |
| Elongation at break (εR) | ISO 527 | % | ≥ 700 | ≥ 600 | ≥ 600 | ≥ 50 |
| Impact strength (an) | ISO 179 | kJ/m2 | No Break | No Break | No Break | No Break |
| Flexural strength (σB 3,5%) | ISO 178 | Mpa | 22 | 40 | 80 | 27 |
| Modulus of elasticity (Et) | ISO 527 | Mpa | 1150 | 760 | 260 | 680 |
| Coef. of linear therm. expansion (α) |
DIN 53752 | K-1 x 10-4 | 1.5 | 1.5 | 1.4 | 2 |
| Vicat Softening Temp | ISO306 | 0C | 80 | 80 | 94 | 80 |
| Leading the way bringing world class valued additive products to India, Sangiris proud to announce yet another innovative product in its varied portfolio. TRibSheets have T shaped Profiles projecting on a one surface of a PE/PPplastic sheet. The T Rib sheets when embedded within Concrete providesuperior grip. The barrier created by the Thermoplastic provides the bestprotection from Chemical attack in a variety of application whereas the baseConcrete provides the necessary mechanical strength Typical Properties
|
NovaStrong is made from UHMW-PE, a subset of the thermoplastic -polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million, strengthening intermolecular interactions resulting in highest impact strength of any thermoplastic, very low coefficient of friction, self-lubricating, and is highly resistant to abrasion (15 times more resistant to abrasion than carbon steel). Its coefficient of friction is significantly lower than that of Polyamide and Acetal, and is comparable to that of PTFE, but UHMWPE has better abrasion resistance than PTFE.
| Features & advantages of NovaStrong UHMW-PE Sheets:High Abrasion ResistanceLow Specific WeightLow water absorptionOdorlessGood Low temp ResistanceLow Coefficient of FrictionHigh chemical resistanceHigh Impact StrengthFood SafeProtection from Stress CrackingWeathering Resistance Transporting machineryStar Wheels, Idler SprocketsTextile machineryBottling MachineryFood processing machinery componentsHarbor and shipbuilding machineryArchitecture & agriculture machineryConveyor SystemsPaper-making machineryDyeing decorationAbrasion Resistant LiningMining IndustryShipping IndustryChemical EquipmentChute liners and Truck /hopper liners |
|
| Thickness (mm) |
Width x Length (m) |
Packing |
| 2 | 1.5 x 2.5 1.5 x 3 |
1 no / roll |
| 3 | ||
| 4 | ||
| 5 | ||
| 6 | ||
| 10 | 1 x 2 | |
| 12 |
Leading the way bringing world class valued additive products to India, Sangiris proud to announce yet another innovative product in its varied portfolio. TRibSheets have T shaped Profiles projecting on a one surface of a PE/PPplastic sheet. The T Rib sheets when embedded within Concrete providesuperior grip. The barrier created by the Thermoplastic provides the bestprotection from Chemical attack in a variety of application whereas the baseConcrete provides the necessary mechanical strength
|
