Our Product / Services
Industrial Seals
2 Products availablePackaging Solutions
1 Services availablePlastic Component
1 Products availableWe offer a complete product range of PTFE Universal Soft Packing[, Lubricated PTFE Packing, Pre Formed Ring Set, PTFE/ PTFE Graphite putty and PTFE Universal Packing
Construction: | Extruded soft packing made from PTFE and high temperature lubricant. Available in square and round sections. |
Application: | Suitable for pumps, valves and many other static applications. Due to the chemical inertness of PTFE, it can be used with all substances. Offers excellent sealing when used in place of gasket or jointing in flanges in almost all type of industries. |
.
Standard Packing | 3 mm - 30 mts.4 mm - 20 mtrs.5 mm to 8 mm - 10 mtrs. 10 mm to 19 mm - 5 mtrs. |
Construction: | Valve Seal is provided with double construction of 100% PTFE core with spiral wrapping of PTFE tape. |
Application: | The core fills all voids and confirms to uneven spindles and flanges while the spiral wrapping of PTFE tape prevents extrusion at both ends of the spindle. It is widely recommended for use on valves in various industries for obtaining practically Zero Leakage. Can also be used in place of gasket in flanged joint. |
Standard Packing: | 3 mm - 15 mts. 4 mm - 10 mts.6 mm - 5 mts. 8 mm - 5 mts.10 mm - 3 mts. 12 mm - 2 mts. |
Construction: | Braided packing made from a special grade of PTFE inbuilt with an inert high temperature lubricant. |
Application: | This is a non toxic, chemically inert and self lubricating packing. Due to its chemical inertness it can be used against almost all media. Widely used in rotating and static applications. Excellent packing for use in food processing, pharmaceutical and chemical industries, etc. |
Standard Packing: | 6mm - 45mm. |
construction: | high quality carbon fibre impregnated with graphite and an inert lubricant. |
application: | this packing is extremely flexible and has excellent heat dissipating properties and very low coefficient of friction. It can be used for sealing boiler feed pumps, valves, mixers, etc., in pulp & paper, chemical & pharmaceutical industries, power plants, etc. |
available size: from 3mm to 45mm.
Service Parameters: |
Temp. | pH | Pressure | Velocity |
� C | Range | Kg/cm2 | Mtrs/sec | |
-240 to 600 | 0-14 | 200 | 20 |
Standard Packing: |
3mm to 5mm | 6mm to 14mm | 16mm to 19mm | Above 19mm |
1/2 kg | 1kg | 2kg2 | 5kg |
Construction: | High strength organic aramid (aromatic polyamide) synthetic yarn impregnated with PTFE and lubricated with a special high temperature lubricant. |
Application: | High strength and its abrasion resistance of the yarn makes it ideal for use with abrasive sand, slurry, gritty media, sludge and sewerage handling equipments. It is used in pulp and paper, chemical, petrochemicals, pharmaceuticals, sugar, food industries, power plants, etc. Used as anti extrusion rings with other packing. Available Size: From 3mm to 45mm . |
Service Parameters: |
Temp. | pH | Pressure | Velocity |
� C | Range | Kg/cm2 | Mtrs/sec | |
-240 to 260 | 2-12 | 250 | 12 |
Standard Packing: |
3mm to 5mm | 6mm to 14mm | 16mm to 19mm | Above 19mm |
1/2 kg | 1kg | 2kg2 |
Construction: | Combination packing made of a high-grade PTFE yarn with aramid corners. |
Application: | A non toxic and dimensionally stable packing suitable for corrosive chemicals and abrasive media. This packing is also used as an anti extrusion rings as it can withstand high pressure in rotary as well as reciprocating applications. Widely used in food and pharmaceutical industries, dairies, refineries, fertilizer plants, etc. Available Size: From 3mm to 45mm . |
Service Parameters: |
Temp. | pH | Pressure | Velocity |
� C | Range | Kg/cm2 | Mtrs/sec | |
-200 to 260 | 2-12 | 180 | 12 |
Standard Packing: |
3mm to 5mm | 6mm to 14mm | 16mm to 19mm | Above 19mm |
1/2 kg | 1kg | 2kg2 | 5kg |
construction: | a packing with a center of hollow silicon core or solid silicon cord braided around by yarn of style 51, 61, 71, 82 & 83. |
application: | a specially developed packing for use on rotating equipment with excessive shaft deviation. It also reduces shaft / sleeve wear. The center of silicon core / cord gives it strong restoration properties, and exerts back-pressure, resulting in total sealing. This packing is suitable for pumps, reactors, mixers, agitators, etc. |
Construction: | Die-molded braided compression packing rings with an oblique cut available in Style 41, 42, 51, 61, 71, 82 & 83. |
Application: | Chances of inconsistent length and edges are high in onsite cut rings even by experienced technician and these are main causes of packing failures. Die-molded braided compression packing rings are precisely cut as per the dimensions and hence minimises packing failures. It improves seal between the equipment shaft/stem and gland. It is easy to install and maintain, die-molded braided compression packing rings are the best option for applications in valves and pumps. |
Construction: | Malleable paste made from special grade PTFE or special grade PTFE bonded with Graphite, and a balanced compound of oils, greases and binders. |
Application: | This self-lubricating putty has excellent thermal and chemical resistance, and reduces friction on shafts. It is widely used on scored shafts and valve stems, in pumps, valves, reactors, agitators, etc. It is recommended to use anti extrusion rings of Style 41, 42, 51, 61, 71, 82 & 83. |
Service Parameters
Temp. | pH | Pressure | Velocity | |
� C | Range | Kg/cm2 | Mtrs/sec | |
PTFE Putty | -100 to 260 | 0-14 | 100 | 5 |
PTFE Graphite Putty | -100 to 300 | 0-14 | 100 | 12 |
Construction: | Valve Seal is provided with double construction of 100% PTFE core with spiral wrapping of PTFE tape. |
Application: | The core fills all voids and confirms to uneven spindles and flanges while the spiral wrapping of PTFE tape prevents extrusion at both ends of the spindle. It is widely recommended for use on valves in various industries for obtaining practically Zero Leakage. Can also be used in place of gasket in flanged joint. |
Service Parameters: |
Temp. | pH | Pressure | Velocity |
� C | Range | Kg/cm2 | Mtrs/sec | |
-100 to 260 | 0-14 | 200 | --- |
Construction: | High tensile yarn made of special grade PTFE and impregnated with PTFE dispersion. |
Application: | This packing is mainly recommended where lubricant is not to be used due to danger of combustion. It is also used in pumps having low shaft speed and equipments in handling hazardous & corrosive chemicals. Complies with: - US FDA 21 CFR 177.1550- Article 3 of European Regulation No. 1935/2004. |
Service
Parameters: |
|||
Temp. | pH | Pressure | Velocity |
� C | Range | Kg/cm2 | Mtrs/sec |
-200 to 260 | 0-14 | 100 |