SANG-V SWR double wye is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle with three pipes. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Double Wye Plain is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Double Wye Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) reducer is a type of plumbing fitting used to connect SWR pipes or fittings of different sizes or types, typically in a system that requires a reduction in pipe diameter or a transition between different materials. SWR reducers are commonly used in plumbing and drainage systems to adapt SWR pipes or fittings of larger diameter to smaller diameter, or vice versa, allowing for a smooth and efficient flow of soil, waste, and rainwater. They are also used to transition between different types of SWR pipes or fittings, such as PVC (polyvinyl chloride) or UPVC (unplasticized polyvinyl chloride), and may be used in residential, commercial, or industrial applications. SWR reducers typically have a tapered design, with one end larger in diameter and the other end smaller, allowing for a gradual reduction in pipe size. They may have a solvent weld (glue) or threaded connection, depending on the type of SWR pipes or fittings being connected, and may also have rubber gaskets or seals to ensure a watertight and leak-proof connection.

SWR Reducer 75 x 110mm comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75 X 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V multi-floor trap in the context of SWR (Soil, Waste, and Rainwater) systems typically refers to a plumbing trap that is designed to serve multiple floors or levels of a building. It is commonly used in multi-story buildings, such as high-rise apartments or commercial buildings, where the plumbing system needs to accommodate the drainage from multiple floors. A multi-floor trap is typically a larger trap that is capable of handling a higher volume of wastewater compared to standard traps used in individual floors. It is usually installed at the lowest point of the building's vertical soil or waste stack, which is the main vertical pipe that carries the wastewater from all the floors to the main sewer or waste system. The multi-floor trap is designed to prevent the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces and to trap debris and prevent it from entering the drain pipe.

Available Sizes: 75mm outlet

SANG-V SWR (Soil, Waste, and Rainwater) bend with a door is a type of plumbing fitting that is used in building drainage and sewage systems to change the direction of SWR pipes at an angle of 87.5 degrees, typically used in tight spaces or where a specific angle is required. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR bends with doors are typically made of Polyvinyl Chloride (PVC), which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes while allowing for easy access to the interior of the bend when needed.

SWR Bend 87.5 DEGREE with door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR nahani trap is typically used in bathrooms or washrooms to create a water seal that prevents the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces. It is usually installed below the washbasin or bathroom sink, and it is designed to trap debris and prevent it from entering the drain pipe. SWR nahani traps are typically made of durable materials such as PVC (polyvinyl chloride) or UPVC (unplasticized polyvinyl chloride), which are resistant to corrosion and chemical degradation. They consist of a curved trap arm that connects to the washbasin or sink drain outlet and a vertical trap bend that holds water, creating a trap seal that prevents the escape of sewer gases. The trap bend is connected to a horizontal drain pipe that leads to the sewer or waste system.

Available Sizes: 75mm outlet

SANG-V SWR (Soil, Waste, and Rainwater) pipe clip, also known as a SWR pipe bracket or SWR pipe hanger, is a device used to support and secure pipes used in plumbing and drainage systems for the disposal of soil, waste, and rainwater. SWR pipe clips are typically made of metal or plastic, and are used to fasten SWR pipes to walls, ceilings, or other structural elements to ensure proper alignment, stability, and support. SWR pipes are used in building and construction for conveying and disposing of waste water, rainwater, and sewage from plumbing fixtures, such as toilets, sinks, and showers, as well as for stormwater drainage. SWR pipe clips are used to securely hold and fasten these pipes in place, preventing them from sagging, moving, or falling.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) S-traps are a type of plumbing trap used to prevent the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces. Like P-traps, S-traps are typically used under sinks, basins, showers, and other plumbing fixtures to create a water seal that prevents sewer gases from entering the building while allowing wastewater to drain away. SWR S-traps are named after their shape, which resembles the letter "S". They consist of a curved trap arm that connects to the fixture's drain outlet and a vertical trap bend that holds water, creating a trap seal that prevents the escape of sewer gases. The trap bend is typically connected to a horizontal drain pipe that leads to the sewer or waste system.

Available Sizes: 110 X 110mm

SANG-V SWR (Soil, Waste, and Rainwater) P-trap is a type of plumbing trap used in SWR systems to prevent the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces. P-traps are typically used under sinks, basins, showers, and other plumbing fixtures to create a water seal that prevents sewer gases from entering the building while allowing wastewater to drain away.A SWR P-trap consists of a U-shaped pipe that has an inlet and an outlet, with a dip or trap seal created by the water that collects in the bottom of the U-shaped bend. This water seal acts as a barrier that prevents sewer gases from flowing back into the building, while still allowing wastewater to pass through and drain away. SWR P-traps are typically made of PVC (polyvinyl chloride) , which is resistant to corrosion and chemical degradation. They are designed to be installed in SWR systems and are compatible with SWR pipes and fittings.

Available Sizes: 110 X 110mm & 110 X 125mm

SANG-V PVC (Polyvinyl Chloride) socket plug is a type of plug used in plumbing and piping systems made of PVC, which is a popular material for its durability, affordability, and versatility in various applications, including plumbing, irrigation, and drainage. PVC socket plugs are used to terminate or plug an open socket or end of a PVC pipe or fitting, providing a watertight seal and preventing the flow of liquids or gases. They are typically used in PVC pipes or fittings that are not in use or need to be temporarily or permanently closed off. PVC socket plugs are designed to fit into the socket or hub of a PVC pipe or fitting, which is the enlarged end of the pipe or fitting that allows for connection with other PVC pipes or fittings. They are typically made of PVC material that is compatible with the PVC pipes or fittings being used, and may have a threaded or non-threaded design, depending on the specific application and requirements.

Available Sizes: 75mm & 110mm

SANG-V SWR vent cowl, also known as a SWR cowling or SWR terminal cowl, is a type of weatherproof cover or hood used in radio frequency (RF) and microwave systems to protect the end of a coaxial cable or waveguide from the elements, while also helping to minimize the occurrence of standing waves and reflections. SWR vent cowls are typically designed to be installed at the open end of a coaxial cable or waveguide that is terminated into free space or an outdoor environment, such as an antenna or an outdoor RF transmission system. They are typically made from weather-resistant materials, such as metal or plastic, and may feature a flared or conical shape to reduce reflections and improve RF performance. The primary function of a SWR vent cowl is to protect the exposed end of the coaxial cable or waveguide from environmental factors such as rain, snow, dust, and debris, which can degrade the performance of the RF system. Additionally, SWR vent cowls may include features such as drain holes or filters to prevent moisture buildup and improve airflow, while minimizing the ingress of foreign objects.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) plain bend is a type of plumbing fitting used in building drainage and sewage systems to change the direction of the SWR pipes. It is also commonly referred to as an SWR plain elbow. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR plain bends are typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Plain Bend 87.5 DEGREE comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V Square jali is to a square-shaped drain cover or grate that is used to cover an opening in a plumbing pipe or drain system. Similar to a round jali, a square jali is designed to prevent debris or objects from entering a pipe or drain while allowing water or liquid to pass through.

SANG-V SWR wye, also known as a SWR Y-fitting or a SWR Y-branch, is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Single Wye Plain is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Single Wye Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V Square jali is to a square-shaped drain cover or grate that is used to cover an opening in a plumbing pipe or drain system. Similar to a round jali, a square jali is designed to prevent debris or objects from entering a pipe or drain while allowing water or liquid to pass through.

SANG-V SWR (Soil, Waste, and Rainwater) reducing tee is a type of plumbing fitting used to connect SWR pipes or fittings of different sizes or types, typically in a system that requires a reduction in pipe diameter or a transition between different materials, while also providing a branch connection. SWR reducing tees are commonly used in plumbing and drainage systems where a branch connection is needed at a different size than the main pipe, or where a change in pipe size or material is required. They are typically used in SWR systems for soil, waste, and rainwater management in residential, commercial, or industrial applications. SWR reducing tees typically have a tee-shaped design, with three openings that allow for connection of three SWR pipes or fittings at different sizes or materials. One end of the tee has a larger diameter, which serves as the main pipe or trunk line, and the other two ends have smaller diameters, which serve as branch connections for the reduced-size pipes or fittings.

SWR Reducing TEE 75 x 110mm comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75 X 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V Round jali is a round-shaped drain cover or grate that is used to cover an opening in a plumbing pipe or drain system. The term "jali" is commonly used in South Asia, particularly in countries like India and Pakistan, to refer to a mesh or perforated cover that is used to prevent debris or objects from entering a pipe or drain, while allowing water or liquid to pass through.

SANG-V SWR Double Wye with Door is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle with three pipes. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Double Wye with Door is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Double Wye with Door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC), which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Single Tee with door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR Single Wye with Door is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Single Wye Plain is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Single Wye with Door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR coupler, also known as a SWR (Soil, Waste, and Rainwater) pipe coupler, is a type of plumbing fitting used to connect two sections of SWR pipes together. SWR pipes are commonly used in building drainage and sewage systems to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR couplers are typically made of polyvinyl chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a watertight connection between two SWR pipes, preventing leaks and ensuring efficient drainage.

SWR coupler comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR (Soil, Waste, and Rainwater) Double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect four SWR pipes at right angles, forming a "T" shape. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Double Tee with Door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Single Tee Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR door cap is a type of plumbing fitting used in SWR (solvent weld pipe) systems to provide a clean and finished look to the end of a pipe that is used for access or cleanout purposes. SWR Door Caps are typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Door Cap comes with rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) bend 45 DEGREE is a type of plumbing fitting used in building drainage and sewage systems to change the direction of the SWR pipes at 45 DEGREE. It is also commonly referred to as an SWR plain elbow. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR plain bends are typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Bend 45 DEGREE comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR (Soil, Waste, and Rainwater) Double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect four SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Double Tee Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) reducing wye is a type of plumbing fitting used to connect SWR pipes or fittings of different sizes or types, typically in a system that requires a reduction in pipe diameter or a transition between different materials, while also providing a branch connection. SWR reducing wyes are similar to regular SWR wyes in their basic shape, which resembles the letter "Y". However, unlike regular wyes that have three openings of the same size, SWR reducing wyes have two openings of different sizes and one common opening, allowing for connection of three SWR pipes or fittings at different sizes or materials, with one branch connection being smaller than the other two.

Available Sizes: 75 X 110mm

SANG-V SWR double wye is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle with three pipes. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Double Wye Plain is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Double Wye Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) reducer is a type of plumbing fitting used to connect SWR pipes or fittings of different sizes or types, typically in a system that requires a reduction in pipe diameter or a transition between different materials. SWR reducers are commonly used in plumbing and drainage systems to adapt SWR pipes or fittings of larger diameter to smaller diameter, or vice versa, allowing for a smooth and efficient flow of soil, waste, and rainwater. They are also used to transition between different types of SWR pipes or fittings, such as PVC (polyvinyl chloride) or UPVC (unplasticized polyvinyl chloride), and may be used in residential, commercial, or industrial applications. SWR reducers typically have a tapered design, with one end larger in diameter and the other end smaller, allowing for a gradual reduction in pipe size. They may have a solvent weld (glue) or threaded connection, depending on the type of SWR pipes or fittings being connected, and may also have rubber gaskets or seals to ensure a watertight and leak-proof connection.

SWR Reducer 75 x 110mm comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75 X 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V multi-floor trap in the context of SWR (Soil, Waste, and Rainwater) systems typically refers to a plumbing trap that is designed to serve multiple floors or levels of a building. It is commonly used in multi-story buildings, such as high-rise apartments or commercial buildings, where the plumbing system needs to accommodate the drainage from multiple floors. A multi-floor trap is typically a larger trap that is capable of handling a higher volume of wastewater compared to standard traps used in individual floors. It is usually installed at the lowest point of the building's vertical soil or waste stack, which is the main vertical pipe that carries the wastewater from all the floors to the main sewer or waste system. The multi-floor trap is designed to prevent the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces and to trap debris and prevent it from entering the drain pipe.

Available Sizes: 75mm outlet

SANG-V SWR (Soil, Waste, and Rainwater) bend with a door is a type of plumbing fitting that is used in building drainage and sewage systems to change the direction of SWR pipes at an angle of 87.5 degrees, typically used in tight spaces or where a specific angle is required. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR bends with doors are typically made of Polyvinyl Chloride (PVC), which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes while allowing for easy access to the interior of the bend when needed.

SWR Bend 87.5 DEGREE with door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR nahani trap is typically used in bathrooms or washrooms to create a water seal that prevents the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces. It is usually installed below the washbasin or bathroom sink, and it is designed to trap debris and prevent it from entering the drain pipe. SWR nahani traps are typically made of durable materials such as PVC (polyvinyl chloride) or UPVC (unplasticized polyvinyl chloride), which are resistant to corrosion and chemical degradation. They consist of a curved trap arm that connects to the washbasin or sink drain outlet and a vertical trap bend that holds water, creating a trap seal that prevents the escape of sewer gases. The trap bend is connected to a horizontal drain pipe that leads to the sewer or waste system.

Available Sizes: 75mm outlet

SANG-V SWR (Soil, Waste, and Rainwater) pipe clip, also known as a SWR pipe bracket or SWR pipe hanger, is a device used to support and secure pipes used in plumbing and drainage systems for the disposal of soil, waste, and rainwater. SWR pipe clips are typically made of metal or plastic, and are used to fasten SWR pipes to walls, ceilings, or other structural elements to ensure proper alignment, stability, and support. SWR pipes are used in building and construction for conveying and disposing of waste water, rainwater, and sewage from plumbing fixtures, such as toilets, sinks, and showers, as well as for stormwater drainage. SWR pipe clips are used to securely hold and fasten these pipes in place, preventing them from sagging, moving, or falling.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) S-traps are a type of plumbing trap used to prevent the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces. Like P-traps, S-traps are typically used under sinks, basins, showers, and other plumbing fixtures to create a water seal that prevents sewer gases from entering the building while allowing wastewater to drain away. SWR S-traps are named after their shape, which resembles the letter "S". They consist of a curved trap arm that connects to the fixture's drain outlet and a vertical trap bend that holds water, creating a trap seal that prevents the escape of sewer gases. The trap bend is typically connected to a horizontal drain pipe that leads to the sewer or waste system.

Available Sizes: 110 X 110mm

SANG-V SWR (Soil, Waste, and Rainwater) P-trap is a type of plumbing trap used in SWR systems to prevent the escape of foul odors and gases from the sewer or waste pipes into living or occupied spaces. P-traps are typically used under sinks, basins, showers, and other plumbing fixtures to create a water seal that prevents sewer gases from entering the building while allowing wastewater to drain away.A SWR P-trap consists of a U-shaped pipe that has an inlet and an outlet, with a dip or trap seal created by the water that collects in the bottom of the U-shaped bend. This water seal acts as a barrier that prevents sewer gases from flowing back into the building, while still allowing wastewater to pass through and drain away. SWR P-traps are typically made of PVC (polyvinyl chloride) , which is resistant to corrosion and chemical degradation. They are designed to be installed in SWR systems and are compatible with SWR pipes and fittings.

Available Sizes: 110 X 110mm & 110 X 125mm

SANG-V PVC (Polyvinyl Chloride) socket plug is a type of plug used in plumbing and piping systems made of PVC, which is a popular material for its durability, affordability, and versatility in various applications, including plumbing, irrigation, and drainage. PVC socket plugs are used to terminate or plug an open socket or end of a PVC pipe or fitting, providing a watertight seal and preventing the flow of liquids or gases. They are typically used in PVC pipes or fittings that are not in use or need to be temporarily or permanently closed off. PVC socket plugs are designed to fit into the socket or hub of a PVC pipe or fitting, which is the enlarged end of the pipe or fitting that allows for connection with other PVC pipes or fittings. They are typically made of PVC material that is compatible with the PVC pipes or fittings being used, and may have a threaded or non-threaded design, depending on the specific application and requirements.

Available Sizes: 75mm & 110mm

SANG-V SWR vent cowl, also known as a SWR cowling or SWR terminal cowl, is a type of weatherproof cover or hood used in radio frequency (RF) and microwave systems to protect the end of a coaxial cable or waveguide from the elements, while also helping to minimize the occurrence of standing waves and reflections. SWR vent cowls are typically designed to be installed at the open end of a coaxial cable or waveguide that is terminated into free space or an outdoor environment, such as an antenna or an outdoor RF transmission system. They are typically made from weather-resistant materials, such as metal or plastic, and may feature a flared or conical shape to reduce reflections and improve RF performance. The primary function of a SWR vent cowl is to protect the exposed end of the coaxial cable or waveguide from environmental factors such as rain, snow, dust, and debris, which can degrade the performance of the RF system. Additionally, SWR vent cowls may include features such as drain holes or filters to prevent moisture buildup and improve airflow, while minimizing the ingress of foreign objects.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) plain bend is a type of plumbing fitting used in building drainage and sewage systems to change the direction of the SWR pipes. It is also commonly referred to as an SWR plain elbow. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR plain bends are typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Plain Bend 87.5 DEGREE comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V Square jali is to a square-shaped drain cover or grate that is used to cover an opening in a plumbing pipe or drain system. Similar to a round jali, a square jali is designed to prevent debris or objects from entering a pipe or drain while allowing water or liquid to pass through.

SANG-V SWR wye, also known as a SWR Y-fitting or a SWR Y-branch, is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Single Wye Plain is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Single Wye Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V Square jali is to a square-shaped drain cover or grate that is used to cover an opening in a plumbing pipe or drain system. Similar to a round jali, a square jali is designed to prevent debris or objects from entering a pipe or drain while allowing water or liquid to pass through.

SANG-V SWR (Soil, Waste, and Rainwater) reducing tee is a type of plumbing fitting used to connect SWR pipes or fittings of different sizes or types, typically in a system that requires a reduction in pipe diameter or a transition between different materials, while also providing a branch connection. SWR reducing tees are commonly used in plumbing and drainage systems where a branch connection is needed at a different size than the main pipe, or where a change in pipe size or material is required. They are typically used in SWR systems for soil, waste, and rainwater management in residential, commercial, or industrial applications. SWR reducing tees typically have a tee-shaped design, with three openings that allow for connection of three SWR pipes or fittings at different sizes or materials. One end of the tee has a larger diameter, which serves as the main pipe or trunk line, and the other two ends have smaller diameters, which serve as branch connections for the reduced-size pipes or fittings.

SWR Reducing TEE 75 x 110mm comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75 X 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V Round jali is a round-shaped drain cover or grate that is used to cover an opening in a plumbing pipe or drain system. The term "jali" is commonly used in South Asia, particularly in countries like India and Pakistan, to refer to a mesh or perforated cover that is used to prevent debris or objects from entering a pipe or drain, while allowing water or liquid to pass through.

SANG-V SWR Double Wye with Door is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle with three pipes. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Double Wye with Door is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Double Wye with Door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC), which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Single Tee with door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR Single Wye with Door is a type of plumbing fitting used in SWR (solvent weld pipe) systems to create a branch or a junction with a 45-degree angle. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR Single Wye Plain is typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Single Wye with Door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR coupler, also known as a SWR (Soil, Waste, and Rainwater) pipe coupler, is a type of plumbing fitting used to connect two sections of SWR pipes together. SWR pipes are commonly used in building drainage and sewage systems to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR couplers are typically made of polyvinyl chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a watertight connection between two SWR pipes, preventing leaks and ensuring efficient drainage.

SWR coupler comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR (Soil, Waste, and Rainwater) Double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect four SWR pipes at right angles, forming a "T" shape. The "door" in this context typically refers to a removable access panel or cover that is integrated into the bend, providing a convenient way to access the inside of the bend for maintenance, inspection, or cleaning purposes. The door is usually designed to fit snugly and securely onto the bend, preventing leaks or odors from escaping the SWR system. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Double Tee with Door comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) single tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Single Tee Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR door cap is a type of plumbing fitting used in SWR (solvent weld pipe) systems to provide a clean and finished look to the end of a pipe that is used for access or cleanout purposes. SWR Door Caps are typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Door Cap comes with rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) bend 45 DEGREE is a type of plumbing fitting used in building drainage and sewage systems to change the direction of the SWR pipes at 45 DEGREE. It is also commonly referred to as an SWR plain elbow. SWR pipes are used to carry soil, waste, and rainwater from buildings to the municipal sewer system or septic tank. SWR plain bends are typically made of Polyvinyl chloride , which are known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, gradual change in direction for the SWR pipes, reducing the risk of clogs and ensuring efficient drainage.

SWR Bend 45 DEGREE comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm (both sizes are also available in Selffit, i.e. without rubber ring)

SANG-V SWR (Soil, Waste, and Rainwater) Double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect four SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.An SWR (Soil, Waste, and Rainwater) double tee plain is a type of plumbing fitting that is used in building drainage and sewage systems to connect three SWR pipes at right angles, forming a "T" shape. The term "plain" typically refers to a plain or unthreaded end on the fitting, which requires solvent welding or cementing for proper installation. SWR single tee plain fittings are typically made of Polyvinyl Chloride (PVC) , which is known for their corrosion resistance and durability. They are designed to be easy to install and provide a smooth, leak-proof connection for SWR pipes.

SWR Double Tee Plain comes with Yellow strip silicone rubber ring fittment for better leakage proofing.

Available Sizes: 75mm & 110mm

SANG-V SWR (Soil, Waste, and Rainwater) reducing wye is a type of plumbing fitting used to connect SWR pipes or fittings of different sizes or types, typically in a system that requires a reduction in pipe diameter or a transition between different materials, while also providing a branch connection. SWR reducing wyes are similar to regular SWR wyes in their basic shape, which resembles the letter "Y". However, unlike regular wyes that have three openings of the same size, SWR reducing wyes have two openings of different sizes and one common opening, allowing for connection of three SWR pipes or fittings at different sizes or materials, with one branch connection being smaller than the other two.

Available Sizes: 75 X 110mm