SANG-V PVC reducer is a type of plumbing or piping fitting that is used to connect PVC pipes of different sizes, allowing for a change in diameter or size along a pipeline. It is also commonly referred to as a PVC reducing coupling or PVC reducer coupling. PVC reducers are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed to be solvent welded or cemented onto the ends of PVC pipes to create a watertight and secure connection. A typical PVC reducer consists of two ends with different diameters. One end is larger and is designed to fit over a larger PVC pipe, while the other end is smaller and is designed to fit inside a smaller PVC pipe. The two ends are connected using a PVC solvent cement or adhesive, which creates a chemical bond that ensures a tight and reliable connection. PVC reducers are available in various sizes to accommodate different pipe diameters and size transitions. They are commonly used in plumbing and piping systems where a change in pipe size is required, such as when connecting pipes of different sizes, transitioning from a larger pipe to a smaller pipe, or vice versa. They are also used to reduce flow velocity or pressure in certain applications.

Available Sizes: 63 X 75mm TO 90 X 110mm

SANG-V PVC elbow is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is a curved fitting that allows for a change in direction of a pipe run. PVC elbows are used to connect two pipes at an angle, typically 90 degrees or 45 degrees, allowing for changes in direction or routing of fluids or gases in a plumbing system. PVC elbows are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations, including standard elbows, street elbows, and long sweep elbows, to accommodate different pipe sizes and requirements. PVC elbows are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are designed to be solvent cemented or glued to PVC pipes to create a strong and leak-free joint.

The PN4 designation with IS:7834, on the other hand, refers to the pressure rating of the 4kgf/square cm.

Available Sizes: 20mm to 160mm

SANG-V PVC elbow is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is a curved fitting that allows for a change in direction of a pipe run. PVC elbows are used to connect two pipes at an angle, typically 90 degrees or 45 degrees, allowing for changes in direction or routing of fluids or gases in a plumbing system. PVC elbows are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations, including standard elbows, street elbows, and long sweep elbows, to accommodate different pipe sizes and requirements. PVC elbows are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are designed to be solvent cemented or glued to PVC pipes to create a strong and leak-free joint.

The Eco designation, on the other hand, refers to the low weight pressure rating of the fitting.

Available Sizes: 63mm, 75mm, 90mm & 110mm

SANG-V PVC TEE is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is shaped like the letter "T" and is used to connect three pipes at right angles, allowing the flow of fluid or gas to be diverted or combined in different directions.

PVC TEEs are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations to accommodate different pipe sizes and requirements.

PVC TEEs are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are easy to install using solvent cement or PVC glue to create a strong and leak-free joint.

The PN4 designation with IS:7834, on the other hand, refers to the pressure rating of the 4kgf/square cm.

Available Sizes: 20mm to 160mm

SANG-V PVC end cap threaded refers to a type of plumbing or piping fitting that is used to seal off the end of a PVC pipe, and it has threaded connections or openings. It is made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals.PVC end caps with threaded connections are designed to have female threaded openings that can accept male threaded fittings or other threaded components. These threaded connections allow for additional connections or fittings to be attached to the end cap, providing versatility and flexibility in plumbing and piping systems. PVC end caps with threaded connections are commonly used in various applications where PVC pipes are used, such as residential and commercial plumbing systems, irrigation systems, and other fluid handling systems. They can be used to provide a watertight seal at the end of a PVC pipe, while also allowing for future connections or extensions to be made.

Available Sizes: 63mm to 90mm

SANG-V PVC TEE is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is shaped like the letter "T" and is used to connect three pipes at right angles, allowing the flow of fluid or gas to be diverted or combined in different directions.

PVC TEEs are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations to accommodate different pipe sizes and requirements.

PVC TEEs are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are easy to install using solvent cement or PVC glue to create a strong and leak-free joint.

The PN6 designation with IS:7834, on the other hand, refers to the pressure rating of the 6kgf/square cm.

TEE PN6 is available in 63mm, 75mm & 110mm.

SANG-V ECP refers to a plain end cap that is made of Polyvinyl Chloride (PVC) material. It is a type of plumbing or piping fitting that is used to seal off the end of a PVC pipe, providing a closure or termination point. PVC end caps are typically used in various plumbing, irrigation, and other fluid handling applications where PVC pipes are used. They are designed to fit over the end of a PVC pipe and provide a watertight seal to prevent water or other fluids from flowing through the pipe. PVC end caps are available in different sizes to accommodate different pipe diameters, and they are usually designed to be solvent welded or cemented to the end of a PVC pipe. Solvent welding or cementing involves using a PVC solvent cement or adhesive to create a chemical bond between the PVC end cap and the pipe, resulting in a secure and leak-free connection.

Plain or unthreaded PVC end caps do not have any threaded connections or openings, and they are used when a sealed termination point is needed without the requirement for additional connections or fittings. ECP is available in 20mm to 180mm sizes.

SANG-V PVC elbow is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is a curved fitting that allows for a change in direction of a pipe run. PVC elbows are used to connect two pipes at an angle, typically 90 degrees or 45 degrees, allowing for changes in direction or routing of fluids or gases in a plumbing system. PVC elbows are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations, including standard elbows, street elbows, and long sweep elbows, to accommodate different pipe sizes and requirements. PVC elbows are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are designed to be solvent cemented or glued to PVC pipes to create a strong and leak-free joint.

The PN6 designation with IS:7834, on the other hand, refers to the pressure rating of the 6kgf/square cm.

Available Sizes: 63mm, 75mm & 110mm

SANG-V PVC MTA stands for Polyvinyl Chloride (PVC) Male Threaded Adapter. It is a type of plumbing fitting that is commonly used in PVC pipe systems for joining pipes with male threaded ends together. The PVC MTA typically has a female socket end that connects to a PVC pipe and a male threaded end that can be screwed into another female threaded fitting, such as a PVC female adapter or a female threaded pipe. PVC MTAs are used in a variety of applications, including residential and commercial plumbing systems, irrigation systems, and other fluid handling systems where PVC pipes are used. They are known for their durability, affordability, and resistance to corrosion and chemicals, which makes them a popular choice for many plumbing and piping installations. Overall, PVC MTAs are widely used in PVC pipe systems for their versatility and reliability in joining pipes with male threaded ends, making them an essential component in many plumbing and piping applications.

Available Sizes: 20mm to 90mm

SANG-V PVC FTA stands for Polyvinyl Chloride (PVC) Female Threaded Adapter. It is a type of plumbing fitting that is used to connect PVC pipes with female threaded ends together or to other male threaded fittings. The PVC FTA typically has a male threaded end that can be screwed into a female threaded fitting, such as a PVC male adapter or a male threaded pipe, and a female socket end that connects to a PVC pipe. PVC FTAs are commonly used in various plumbing and piping applications, including residential and commercial plumbing systems, irrigation systems, and other fluid handling systems where PVC pipes are used. They are known for their durability, affordability, and resistance to corrosion and chemicals, which makes them a popular choice for many plumbing installations.

Available Sizes: 63mm to 90mm

SANG-V PVC reducing MTA (Male Threaded Adapter) is a type of plumbing or piping fitting that is used to connect PVC pipes of different sizes with threaded connections. It allows for a change in diameter or size along a pipeline while also providing male threaded connections for additional fittings or components. PVC reducing MTAs are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed with male threaded connections on one end and a larger diameter socket or slip connection on the other end to fit over a larger PVC pipe. A typical PVC reducing MTA consists of two ends with different diameters. One end has male threads, which are designed to connect to female threaded fittings or components, such as valves, elbows, or tees. The other end has a socket or slip connection, which is designed to fit over a larger PVC pipe and is solvent welded or cemented onto the pipe to create a watertight and secure connection.

Available Sizes: 63 X 75mm & 75 X 90mm

SANG-V PVC service saddle is a type of plumbing or piping fitting that is used to create a branch connection on a PVC pipe for a service line, such as for tapping into a main water supply line or connecting a smaller line to a larger line. It is called a "saddle" because of its shape, which resembles a saddle that is placed over the main pipe with a hole or opening for the service line to be connected. PVC service saddles are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed to be solvent welded or cemented onto the main PVC pipe to create a watertight and secure connection. A typical PVC service saddle consists of a circular or oval-shaped saddle portion with a hole or opening that matches the size of the service line to be connected. The saddle portion is designed to fit over the main PVC pipe, and it usually has a gasket or sealing mechanism to ensure a watertight seal between the saddle and the pipe. The service line is then connected to the saddle using appropriate fittings or connections, such as a threaded connection or a compression fitting.

Available Sizes (in mm): 63 X 20, 63 X 25, 63 X 32, 75 X 20, 75 X 25, 75 X 32, 90 X 20, 90 X 25, 90 X 32, 110 X 20, 110 X 25 & 110 X 32

SANG-V PVC TEE is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is shaped like the letter "T" and is used to connect three pipes at right angles, allowing the flow of fluid or gas to be diverted or combined in different directions.

PVC TEEs are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations to accommodate different pipe sizes and requirements.

PVC TEEs are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are easy to install using solvent cement or PVC glue to create a strong and leak-free joint.

The Eco designation, on the other hand, refers to the low weight pressure rating of the fitting.

Available Sizes: 63mm, 75mm, 90mm & 110mm

SANG-V PVC reducing FTA (Female Threaded Adapter) is a type of plumbing or piping fitting that is used to connect PVC pipes of different sizes with threaded connections. It allows for a change in diameter or size along a pipeline while also providing female threaded connections for additional fittings or components. PVC reducing FTAs are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed with female threaded connections on one end and a smaller diameter socket or slip connection on the other end to fit inside a smaller PVC pipe. A typical PVC reducing FTA consists of two ends with different diameters. One end has female threads, which are designed to connect to male threaded fittings or components, such as pipes, valves, elbows, or tees. The other end has a socket or slip connection, which is designed to fit inside a smaller PVC pipe and is solvent welded or cemented into the pipe to create a watertight and secure connection.

Available Sizes: 63 X 75mm & 75 X 90mm

SANG-V PVC reducer is a type of plumbing or piping fitting that is used to connect PVC pipes of different sizes, allowing for a change in diameter or size along a pipeline. It is also commonly referred to as a PVC reducing coupling or PVC reducer coupling. PVC reducers are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed to be solvent welded or cemented onto the ends of PVC pipes to create a watertight and secure connection. A typical PVC reducer consists of two ends with different diameters. One end is larger and is designed to fit over a larger PVC pipe, while the other end is smaller and is designed to fit inside a smaller PVC pipe. The two ends are connected using a PVC solvent cement or adhesive, which creates a chemical bond that ensures a tight and reliable connection. PVC reducers are available in various sizes to accommodate different pipe diameters and size transitions. They are commonly used in plumbing and piping systems where a change in pipe size is required, such as when connecting pipes of different sizes, transitioning from a larger pipe to a smaller pipe, or vice versa. They are also used to reduce flow velocity or pressure in certain applications.

Available Sizes: 63 X 75mm TO 90 X 110mm

SANG-V PVC elbow is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is a curved fitting that allows for a change in direction of a pipe run. PVC elbows are used to connect two pipes at an angle, typically 90 degrees or 45 degrees, allowing for changes in direction or routing of fluids or gases in a plumbing system. PVC elbows are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations, including standard elbows, street elbows, and long sweep elbows, to accommodate different pipe sizes and requirements. PVC elbows are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are designed to be solvent cemented or glued to PVC pipes to create a strong and leak-free joint.

The PN4 designation with IS:7834, on the other hand, refers to the pressure rating of the 4kgf/square cm.

Available Sizes: 20mm to 160mm

SANG-V PVC elbow is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is a curved fitting that allows for a change in direction of a pipe run. PVC elbows are used to connect two pipes at an angle, typically 90 degrees or 45 degrees, allowing for changes in direction or routing of fluids or gases in a plumbing system. PVC elbows are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations, including standard elbows, street elbows, and long sweep elbows, to accommodate different pipe sizes and requirements. PVC elbows are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are designed to be solvent cemented or glued to PVC pipes to create a strong and leak-free joint.

The Eco designation, on the other hand, refers to the low weight pressure rating of the fitting.

Available Sizes: 63mm, 75mm, 90mm & 110mm

SANG-V PVC TEE is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is shaped like the letter "T" and is used to connect three pipes at right angles, allowing the flow of fluid or gas to be diverted or combined in different directions.

PVC TEEs are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations to accommodate different pipe sizes and requirements.

PVC TEEs are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are easy to install using solvent cement or PVC glue to create a strong and leak-free joint.

The PN4 designation with IS:7834, on the other hand, refers to the pressure rating of the 4kgf/square cm.

Available Sizes: 20mm to 160mm

SANG-V PVC end cap threaded refers to a type of plumbing or piping fitting that is used to seal off the end of a PVC pipe, and it has threaded connections or openings. It is made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals.PVC end caps with threaded connections are designed to have female threaded openings that can accept male threaded fittings or other threaded components. These threaded connections allow for additional connections or fittings to be attached to the end cap, providing versatility and flexibility in plumbing and piping systems. PVC end caps with threaded connections are commonly used in various applications where PVC pipes are used, such as residential and commercial plumbing systems, irrigation systems, and other fluid handling systems. They can be used to provide a watertight seal at the end of a PVC pipe, while also allowing for future connections or extensions to be made.

Available Sizes: 63mm to 90mm

SANG-V PVC TEE is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is shaped like the letter "T" and is used to connect three pipes at right angles, allowing the flow of fluid or gas to be diverted or combined in different directions.

PVC TEEs are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations to accommodate different pipe sizes and requirements.

PVC TEEs are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are easy to install using solvent cement or PVC glue to create a strong and leak-free joint.

The PN6 designation with IS:7834, on the other hand, refers to the pressure rating of the 6kgf/square cm.

TEE PN6 is available in 63mm, 75mm & 110mm.

SANG-V ECP refers to a plain end cap that is made of Polyvinyl Chloride (PVC) material. It is a type of plumbing or piping fitting that is used to seal off the end of a PVC pipe, providing a closure or termination point. PVC end caps are typically used in various plumbing, irrigation, and other fluid handling applications where PVC pipes are used. They are designed to fit over the end of a PVC pipe and provide a watertight seal to prevent water or other fluids from flowing through the pipe. PVC end caps are available in different sizes to accommodate different pipe diameters, and they are usually designed to be solvent welded or cemented to the end of a PVC pipe. Solvent welding or cementing involves using a PVC solvent cement or adhesive to create a chemical bond between the PVC end cap and the pipe, resulting in a secure and leak-free connection.

Plain or unthreaded PVC end caps do not have any threaded connections or openings, and they are used when a sealed termination point is needed without the requirement for additional connections or fittings. ECP is available in 20mm to 180mm sizes.

SANG-V PVC elbow is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is a curved fitting that allows for a change in direction of a pipe run. PVC elbows are used to connect two pipes at an angle, typically 90 degrees or 45 degrees, allowing for changes in direction or routing of fluids or gases in a plumbing system. PVC elbows are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations, including standard elbows, street elbows, and long sweep elbows, to accommodate different pipe sizes and requirements. PVC elbows are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are designed to be solvent cemented or glued to PVC pipes to create a strong and leak-free joint.

The PN6 designation with IS:7834, on the other hand, refers to the pressure rating of the 6kgf/square cm.

Available Sizes: 63mm, 75mm & 110mm

SANG-V PVC MTA stands for Polyvinyl Chloride (PVC) Male Threaded Adapter. It is a type of plumbing fitting that is commonly used in PVC pipe systems for joining pipes with male threaded ends together. The PVC MTA typically has a female socket end that connects to a PVC pipe and a male threaded end that can be screwed into another female threaded fitting, such as a PVC female adapter or a female threaded pipe. PVC MTAs are used in a variety of applications, including residential and commercial plumbing systems, irrigation systems, and other fluid handling systems where PVC pipes are used. They are known for their durability, affordability, and resistance to corrosion and chemicals, which makes them a popular choice for many plumbing and piping installations. Overall, PVC MTAs are widely used in PVC pipe systems for their versatility and reliability in joining pipes with male threaded ends, making them an essential component in many plumbing and piping applications.

Available Sizes: 20mm to 90mm

SANG-V PVC FTA stands for Polyvinyl Chloride (PVC) Female Threaded Adapter. It is a type of plumbing fitting that is used to connect PVC pipes with female threaded ends together or to other male threaded fittings. The PVC FTA typically has a male threaded end that can be screwed into a female threaded fitting, such as a PVC male adapter or a male threaded pipe, and a female socket end that connects to a PVC pipe. PVC FTAs are commonly used in various plumbing and piping applications, including residential and commercial plumbing systems, irrigation systems, and other fluid handling systems where PVC pipes are used. They are known for their durability, affordability, and resistance to corrosion and chemicals, which makes them a popular choice for many plumbing installations.

Available Sizes: 63mm to 90mm

SANG-V PVC reducing MTA (Male Threaded Adapter) is a type of plumbing or piping fitting that is used to connect PVC pipes of different sizes with threaded connections. It allows for a change in diameter or size along a pipeline while also providing male threaded connections for additional fittings or components. PVC reducing MTAs are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed with male threaded connections on one end and a larger diameter socket or slip connection on the other end to fit over a larger PVC pipe. A typical PVC reducing MTA consists of two ends with different diameters. One end has male threads, which are designed to connect to female threaded fittings or components, such as valves, elbows, or tees. The other end has a socket or slip connection, which is designed to fit over a larger PVC pipe and is solvent welded or cemented onto the pipe to create a watertight and secure connection.

Available Sizes: 63 X 75mm & 75 X 90mm

SANG-V PVC service saddle is a type of plumbing or piping fitting that is used to create a branch connection on a PVC pipe for a service line, such as for tapping into a main water supply line or connecting a smaller line to a larger line. It is called a "saddle" because of its shape, which resembles a saddle that is placed over the main pipe with a hole or opening for the service line to be connected. PVC service saddles are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed to be solvent welded or cemented onto the main PVC pipe to create a watertight and secure connection. A typical PVC service saddle consists of a circular or oval-shaped saddle portion with a hole or opening that matches the size of the service line to be connected. The saddle portion is designed to fit over the main PVC pipe, and it usually has a gasket or sealing mechanism to ensure a watertight seal between the saddle and the pipe. The service line is then connected to the saddle using appropriate fittings or connections, such as a threaded connection or a compression fitting.

Available Sizes (in mm): 63 X 20, 63 X 25, 63 X 32, 75 X 20, 75 X 25, 75 X 32, 90 X 20, 90 X 25, 90 X 32, 110 X 20, 110 X 25 & 110 X 32

SANG-V PVC TEE is a type of plumbing fitting used in PVC (polyvinyl chloride) piping systems. It is shaped like the letter "T" and is used to connect three pipes at right angles, allowing the flow of fluid or gas to be diverted or combined in different directions.

PVC TEEs are commonly used in various applications, such as residential and commercial plumbing, irrigation systems, and industrial processes. They come in different sizes and configurations to accommodate different pipe sizes and requirements.

PVC TEEs are typically made of durable PVC material, which is known for its excellent corrosion resistance, durability, and affordability. They are easy to install using solvent cement or PVC glue to create a strong and leak-free joint.

The Eco designation, on the other hand, refers to the low weight pressure rating of the fitting.

Available Sizes: 63mm, 75mm, 90mm & 110mm

SANG-V PVC reducing FTA (Female Threaded Adapter) is a type of plumbing or piping fitting that is used to connect PVC pipes of different sizes with threaded connections. It allows for a change in diameter or size along a pipeline while also providing female threaded connections for additional fittings or components. PVC reducing FTAs are typically made of Polyvinyl Chloride (PVC) material, which is known for its durability, affordability, and resistance to corrosion and chemicals. They are designed with female threaded connections on one end and a smaller diameter socket or slip connection on the other end to fit inside a smaller PVC pipe. A typical PVC reducing FTA consists of two ends with different diameters. One end has female threads, which are designed to connect to male threaded fittings or components, such as pipes, valves, elbows, or tees. The other end has a socket or slip connection, which is designed to fit inside a smaller PVC pipe and is solvent welded or cemented into the pipe to create a watertight and secure connection.

Available Sizes: 63 X 75mm & 75 X 90mm