Sanghavi Group Ahmedabad, Gujarat

UTA (Universal Tile Fixing Adhesive) Product Decription: "MYMIX – UTA (Universal Tile Fixing Adhesive)" is a Cementitious ready mix which is a thin bed polymer modified tile adhesive for interior and exterior application. Its unique properties make it ideal for fixing ceramic tiles, vitrified tiles, natural stones and granite to most building substrates Application: Specially for interior & exterior floors and walls installations All types of tiles and stone Enquiry Advantages: Easy to Apply, Single component adhesive More open time Dual purpose for floor and wall with good adhesion workability Suitable Substrates: Concrete wall and floor area Brick Masonry Cement mortar beds High Shear Bond Strength Superior adhesion for porcelain and vitrified tiles Tile‐on‐tile application Cement Plaster Thin-set Cementitious Screeds Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Colour: Available in Grey & White Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area How to apply: Add 25 kg of “MYMIX‐UTA (Universal Tile Fixing Adhesive)” to approx. 6.5 to 7.5 liters Of cool and clean tap water and stir properly for 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture After stirring wait for 10 minutes, stir once again and apply the adhesive on the subfloor with the recommended adhesive notch trowel Press the tiles within 15 to 20 minutes with a shuffling movement onto the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive. Remove excess adhesive immediately from the joints The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish. The surface should be flat with a tolerance of 4mm over a distance of 2 meters. It is essential to waterproof wet areas prior to tiling. New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be filled after minimum 24 hours

MCR (Micro Concrete) Product Detail: "MY MIX - MCR  (Microconcrete)" is cementitious, non -shrink, flowable, high strength micro-concrete for structural repair with high precision concrete. It is recommended thickness is up to 40mm to 100mm. It is suitable for various structural strengthening measures such as encasement buildups, jacketing etc. Advantages: Flowable mortar eliminates honey combination High early and final strength Compensation for shrinkage and settlement in the plastic state Develops high initial and final strength Excellent resistance to moisture ingress Easy to use How to Apply: Ensure leak proof shuttering before starting work Add 4 to 4.5 liters of water for 25 kg of MCR. The approx. ratio of 16% to 18% by weiht If concrete thickness is more than 100mm, Mix 5 to 10mm pre‐washed coarse aggregate Do not use vibrators, avoid vibration for 2‐3 hours after pouring MCR Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

SLU (Self Leveling Underlayment) Product Description: "MYMIX - SLU  (Self Leveling Cement based Underlayment)" is a blend of specially selected cements, graded aggregates, synthetic polymers and workability aids. It is supplied as a dry powder requiring only, the addition of water to produce a smooth free flowing and self leveling smoothing coat, which can be laid to a feather edge. When thickness greater than 10mm is required, washed concrete sand can be added in equal proportions (if sand is added the product becomes trowellable and is no longer self leveling). Advantages: Easy to use, simply add measured Quantity of water Time saving, Self levelling giving quick easy lying Excellent Bond, content ensures built in adhesion and a firm bond to substrate Rapid Hardening, Enables early fixing of floor covering Application: For leveling out uneven RCC floor surfaces prior to covering with floor finishes. e.g. tiles, carpeting, linoleum, rubber and other sheet flooring How to Apply: Clean Application Area from dust & grease Pour 4.5 to 5.5 litre water in a bucket Add 25 kg product in the Bucket Mix thoroughly preferably with mechanical stirrer or manually Do not mix more material that can be laid in 10 minutes Ensure that next mix is ready to pour without any interval Pre‐wet application area, avoid direct sunlight Pour the prepared mix on to the substrate with trowel Do not attempt to float the setting surface If mix stiffens before it has been spread it must be discarded Wait for 24 hours before use Packing: 25 kg bag and Project packing of 40 kg bag is available on demand Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in dry area.

MYMIX RITESEAL TM  (Waterproofing System) is powder based single component, high polymer modified, elastomeric, waterproof coating for all kind of cementitious surfaces. It has very high water permeability against hydrostatic pressure with standing capacity. It is to be mixed with water and applied by paintbrush. Suitable Substrates: All cementitious RCC plastered surfaces Interior and Exterior wet areas Coverage: Two coats 1 sq. mt./ kg. Application: Swimming pool waterproofing Toilets and bathrooms sunk area All cement based basements Overhead & Underground water tanks Roof and slabs Dam, water towers, Reservoirs and channels ACC blocks and cement boards Advantages: Excellent adhesion to cement surfaces Excellent Waterproofing and crack – over bridging ability Highly effective for positive & negative sides of hydrostatic pressure It was high water permeability and is easy to use Very good UV resistance Positive side permeability : 5 – 7 Bar Negative side permeability : 1.5 Bar Non – Toxic How to apply : Clean Application Area from dust & grease Pour 3.8 liter to 4 liter water in a bucket Add 10 kg product in the Bucket Mix thoroughly preferably with mechanical stirrer or manually Wait for 5 minutes Pre-wet application area, avoid direct sunlight Apply the paste on the surface with a brush Wait for 2 hours Apply 2nd coat to get uniform surface Wait for 24 hours before use Packing 1 kg pouch and 10 kg bag Shelf Life: Factory sealed bags are best before 12 months from the date of manufacturing in unopened condition stored in

CWC (Cementitious Crystalline Water Proofing System) Product Description: MYMIX - CWC  (Cementitious Crystalline Waterproofing System) is an integral capillary concrete waterproofing compound which waterproofs and protects concrete in depth. It consists of Portland cement, specially treated quartz sand and special chemicals. Advantages: Easy to apply Penetrates deeply and seals concrete capillary tracts and shrinkage cracks Applicable for either positive or negative side pressure Effective under high hydrostatic pressure Tear or puncture resistant Does not require protection Withstands aggressive saline or chemical attack Suitable Substrates Basement and Foundation Tunnels and Subways Sewage and water treatment plants Concrete pipes How to apply Clean Application Area from dust & grease Pour 9 to 10 litre water in a bucket Add 25 kg MYMIX - CWC to water Mix thoroughly preferably with mechanical stirrer or manually Wait for 5 minutes to get a homogenous mix   Dams and reservoirs Harbours and bridges Parking areas Thoroughly scratch the surface using metal wire brush Apply the compound on the damp surface with a wire / nylon brush for better penetration Wait for 3 hours then Apply the second coat to get uniform surface by brush on damp surface Wait for another 24 hours Keep treated area damp for 5 days

RITEPOXY TM  ESG 1200  (Epoxy Stain-free Grout) is designed specially for use in filling up joints of ceramic tiles, vitrified tiles and stone joints, where hygiene is of utmost importance such as bathrooms, kitchens, living room, bedroom, hospitals, laboratories, swimming pools and high traffic areas.  RITEPOXY TM  ESG 1200  is three component, easy to mix, chemical resistant joint filler and is available in 28 shades.   Features : Colour fast and 100% Stain free Chemical resistant with non-toxic properties Anti-bacterial and Anti-fungal Strong, durable and easy to clean Ideal for waterproof grouting Available in 28 shades Application Preparation : Clean application area & remove dirt, dust & excess adhesive from tile joints. Mix Part A & Part B in a bucket thoroughly and slowly add Part C (filler Powder) to make a homogenous mixture. Using rubber float fill-up the tile joints. Wait for 30-45 mins for joints to harden. Begin initial clean-up with water & gently use scrub pad in circular motion to remove excess material from the tile / stone surface. Use plenty of clean water until excess grout is cleared from surface. Remove excess material from the tile surface and use wet towel at 45 degree to the grout joints. Wait for 2-3 hrs before giving smooth finish to grout surface with a sponge & hand-glove finger with mild shampoo water. Wait for 24 hrs and finally clean the surface with water to remove the epoxy marks. Surface is now ready to use. Mixing Detail :   Particulars1 kg Pack5 kg Pack Part A - Hardener 70 gm 350 gm Part B - Resin 180 gm 900 gm Part C - Filler powder 750 gm 3.75 kg     Area of Application : Washrooms and Cleaning Rooms Swimming Pools Laboratories Schools Hospitals and Operation Theaters Lounges Packing Details : Available in 1 kg and 5 kg units Project pack in 20 kg, available on request Shelf Life : 24 months from the date of manufacturing. Coverage : Varies with width and depth of joint.