Sandy Scientific Instruments & Co

Alandur, Chennai, Tamil Nadu

The furnace is supplied in vertical and horizontal model, as per request. Double walled chamber outer chamber made of cold rolled mild steel sheets and finished in powder coating. The inner chamber is formed by high Alumina tube capable of withstanding temperature up to 1200C. The tube will have one end closed or both ends opened as per the requirement of customers. Insulation with high-density superior quality ceramic fibre blanket. The furnace is heated by KANTHAL heating elements. The temperature is controlled by Digital PID Controller with S.S.R. output. The sensor will be Cr/A1 type thermocouple. The size of the tubes available are 40 to 100 mm ID and with length of 350 mm to 650 mm.

Temperature Range : 600 – 1200 C

Power supply : 230 Volts, Single Phase

Construction : It is triple walled construction. Inner chamber made of 304 grade stainless steel. Outer chamber is made of mild steel attractive finished in powder coating for durable operation. Inner chamber is fabricated with ribs to adjust trays to any convenient height. Oven supplied with removable perforated trays 2 or 3 depending on sizes. Trays are made of stainless steel.

Insulation : It insulated by 3” gap between the walls is filled with special grade wool for proper insulation and to avoid heat losses.

Door : It is double walled inner Stainless steel and outer chamber mild steel with powder coated paint fitted with heavy stainless steel hinges with spring loaded lock.

Heating Elements : Heating elements are made of high-grade Nichrome wire, which are put inside the porcelain beads and placed at bottom and two vertical sides for uniform temperature all over the space.

Temperature Control : The temperature is controlled by Digital Temperature Controller variable from 5o C above ambient to 250oC with a sensitivity of +/-2o C.

Ventilation : Air ventilators are provided top at as well as the bottom to ventilate gases and fumes if any.

Control Panel : The equipment is provided with a panel which is just below the door having a Digital Temperature Controller, On/Off switch, 2 pilot lamps and provision for fixing the Timer.

Power Requirement : Supplied with cord and plug, Suitable to operate on 220V as per indicator single phase, 50 Hz AC supply.

Including :

• Digital temperature Indicator com controller with RTD Sensor
• Air Circulating fan Assembly

Vacuum Oven is reliable day-to-day operation in variety of uses in the field of Medical, Industries etc.

Construction : Unit is sturdy with double walled chamber. Inner chamber is cylindrical in shape made of stainless steel with provision for vacuum and the vacuum gauge is provided at the top of unit and outer chamber rectangular in shape made of thick mild steel with attractively finished with powder coated paint

In order to attain maximum client satisfaction, we check the product quality on several counts at several stages. We are known for delivering the orders within the specified time frame owing to our modern transit facilities. The offered Industrial Tray Dryer is available with a quality warranty of 12 months.

We offer a wide range of   Laboratory Muffle Furnaces   in this category which includes    muffle furnaces, industrial muffle furnaces and mild steel muffle furnaces. We manufacture a wide array of Muffle Furnaces, which is offered in different sizes as per the current industry standard. These furnaces are designed with complete perfection to assure low maintenance and high performance. Our product array are highly demanded in various application in the emerging field of agricultural, medical, research laboratories, industrial, ash determination, metal treatment and wool industries.

Features :

• Temperature up to 1200^oC.
• Time proportionate digital temperature controller with an accuracy of +/-2^oC.

 

Optional Extra Cost : Programmable Controller

Water Bath shaker units are double walled with exterior body and inner chamber of stainless steel having effective insulation in between at hat does not allow the loss of heat for longer period of time. Double walled chamber, inner chamber made of stainless and outer fabricated out of cold roller mild steel sheets duly finished in attractive powder coat point. The pyramid-Cal lid is also made of stainless steel prevents falling of condensed water droplets on the inner space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses. Heating is achieved by immersion type heater and the temperature is controlled by hydraulic type thermostat within the operating range from Ambient +5^oC to 95^oC. The bath is provided with an oscillating tray riding on ball rollers oscillated through a gear variable speed motor. Shaking speed range is between 40 to 140 cycles per minutes. The shaking tray can either hold test tubes or conical flasks of 25 ml to 1000 ml as ordered by the users. Supplied completed with one shaking tray and cord and plug. Designed to work on 220 /.230 volts AC.

Temp. Range : Ambient + 5^o C to 90^o C

This is for ideal for mixing and development of culture, chemicals , solvent and various other application.The orbital shaker is assembled in heavy duty mild steel angle and sheet section. A speed selector switch for variable speed and main indicating lamp. Suitable to work on 230v, 50 HZ. Single phase AC mains.(With out rpm indicator).

Optional Accessories Extra : Digital RPM indicator with self indicator sensor most advanced model.

We are a manufacturer, supplier & dealer of High Temperature Furnaces. Lab High Temperature Furnace: High temperature Muffle Furnaces are designed to meet the requirements of varies customers in Industries, Educational Research fields etc.

Construction :

• Double walled chamber outer chamber made of mild steel sheets and finished in powder coated paint. inner chamber is formed by high temperature withstand Zirconia Vacuum Board following by Ceramic fibre blankets on all the sides.
• Double walled door mounted on heavy-duty hinges in the front is provided with effective locking arrangements. Heating elements will be silicon Carbide Rods. Further the door is provided with door limit switch to cut off the powder supply whenever the door opened and restart when the door is closed.
• Temperature is maintained and controlled by Digital PID Temperature controller with Thyristor Control Device working in Conjunction with Cr/A1 Thermocouple. Supplied complete with control panel.

Features :

• Continuous Operating Temperature : 1350^o C
• Maximum Temperature : 1400^o C
• Suitable to work on 220V, single phase 50 Hz, AC supply.

Construction : The chamber will be constructed of cold rolled mild steel outer wall with powder coat finish or fully stainless steel. The inner chamber made of 304 Grade stainless steel sheets to avoid any corrosion. Inner and the outer wall will be insulated with High grade glass wool to maintain low temperature.
Individual cabinet type drawers with proper balancing will be provided .Each cabinet can be drawn separately as required .The drawers will be provided with roller mechanism for smooth movement and provided with locking arrangement. The base of the cabinet drawer (stretcher) will also be made of stainless steel of 304 grades.

Door : The door will also be insulated with leak proof gasket along the edges and mounted on heavy duty handle and locking arrangement.Specially designed evaporated coil with forced air circulation fan assembly will be provided for faster cooling and maintain uniform temperature inside the chamber.

Cooling System : The cooling of the chamber will be performed by means of hermetically sealed cooling compressors and cfc free.

Temp. Controller: The temperature control is by digital temperature indicating controller working in conjunction with PT 100 sensor.

Control panel: The control panel accommodates the Digital temperature controller, main MCB switch, fuse, indicating lamps.

Capacity : 3 & 6 Bodies model is available.

Temperature : 4^oc for short terms storage and -10^oc for long terms storage.

We are successfully engrossed in manufacturing and supplying exceptional quality  Laboratory Autoclaves  like portable autoclave, vertical autoclave, lab autoclave, etc. At our highly advanced manufacturing set-up, these autoclaves are manufactured by utilizing the best quality components and contemporary techniques under the visionary guidance of our talented professionals. The offered autoclaves find application in chemical laboratories for sterilizing purpose. In addition to this, clients can avail these  Laboratory Autoclaves  at reasonable prices from us.

Features :

• Hassle free performance
• Sturdy construction
• High operational speed
• Low electricity consumption

Construction : Double walled construction with boiler made of SS thick sheet. Outer shell is made of SS finished and Inner and outer chamber is fully made of SS also available. Lid is made of SS thick plate and is tightened all-round by wing nut locking system. Sterilizer is hydraulically tested up to 20 psi as safety measures and fitted with Neoprene Rubber Gaskets to ensure tight sealing. Autoclaves are fitted with pressure gauge, steam release cock, Spring – loaded safety valve that can set at any selected point 15psi to 20 psi +/- 3 psi and drain outlet.
An ISI marked immersion type suitable rating element heats the water and steam to desired temperature and pressure. Supplied complete unit with Pedal Lifting Device, Perforated S.S Basket, and Wing Nut opener. Cord and plug to work on 220V, 50Hz AC Supply :

• Regular Working Pressure : 15psi

Optional Accessories for the above Autoclaves extra cost :

• Automatic pressure control switch                                                     
• Automatic low water level cut-off device                                                              
• Automatic 0-60 minutes Electric                                                                          
• Digital Temperature Controller Cum Indicator with sensor
• Radial Locking System
• Automatic Timer 24 hours Range (0-9999)

Sandy Scientific Deep Freezer are reliable day-to-day operation in variety of uses in the field of Medical R & D unit, Agriculture, Industries, Educational Institutions etc.

Deep freezer (Vertical) :

• Construction : Double walled chamber. Inner chamber made of stainless steel well-polished and fusion welded. The outer is made of M.S. sheets attractively finished in powder coating for durable operation. The inner chamber accommodates stainless steel Trays.

Insulation :

• High grade glass wool or PUF insulation is provided at the sides between to two walls to minimize the sweating in humid conditions.
• Evaporating coils are lead soldered and fixed in the back side of the inner chamber. Double walled door in front provided with magnetic gasket for perfect sealing and provided with heavy duty latching arrangement. Temperature maintained and controlled by digital temperature controller working in conjunction with PT 100 Sensor. Door operated illumination lamp is provided inside the chamber. Refrigerant system consists of compressor, air cooled condenser and heavy duty motor driven fan provided at the bottom while the control panel with built in digital temp. Controller cum indicator, indicating lamp with switches etc. provided on the top of the cabinet.

Temperature Range : Ambient 5^oC to -20^o 40^oc

Power Supply : 230 Volts 1 Phase, 50 Hz Ac Supply

Deep freezer (horizontal) :

• Construction : Double walled chamber with opening at the top. Top portion of the chamber and top lids are made of thick stainless steel well-polished and fusion welded. The outer chamber is made of M.S.sheet and attractively finished in powder coated finish. Inner chamber is made of stainless steel.

Insulation : High class insulation with combination of special grade glass wool and PUF insulation is provided at the sides between to two wall to minimize the sweating in humid conditions.The top lid is provided with gasket seals and locking arrangements. Evaporating coils are lead soldered and fixed in the back side of the inner chamber. Temperature maintained and controlled by digital temperature controlled working in conjunction with PT 100 sensor. Refrigerant system consists of compressor, air cooled condenser and heavy duty motor driven are provided at the bottom. The control panel with built in digital Temp.Controller cum indicator, indicating lamp with switches etc. are provided.

Temperature Range : Ambient 5^oC to -20^oc+/- 1^oc

Power Supply : 230 Volts 1 Phase, 50 Hz Ac Supply

Double walled chamber, inner made of polished stainless steel sheets and outer made of cold rolled mild steel sheets with powder coat finish. The wall is insulated with special grade glass wool. The inner chamber accommodates ones no. easily removable stainless steel tray at adjustable height and is also provided with a shaking platform with threaded holes for mounting stainless steel clamps for holding conical flasks from 50 ml to 1000 ml capacity. An outer double door with inner full view acrylic door permits inspection of specimens. Heating Element is Imported Nichrome wires and Temp. Is controlled by Automatic Digital Indicator Cum Controller working in conjunction with PT 100 sensor. Powerful air circulator creates positive airflow through the incubator. The shaker is driven by a variable DC motor with variable speed control panel accommodating, digital controller, pilot indicating lamps, ON/OFF switches etc., will be provided at the top of the unit.

Platform Holding Capacity :

• 16 Conical flasks x 500ml
• 24 Conical flasks x 250ml

Optional Extra Cost :

• Digital RPM indicator
• Digital Time (0-9999)
• Chamber Illumination-two fluorescent lamp
• Chamber illumination by two U.V lamps instead Of fluorescent Lamp
• Voltage stabilizer

We offer a comprehensive range of high performance horizontal, vertical Laminar flow clean air cabinets. These are designed to meet the filtration. Illumination, and noise & vibration requirements, providing particle free air to meet class 100 condition of US Federal Standard.

Construction : All Laminar Flow cabinet are basically constructed out of SS.

Air Flow And Filtration :

• Laminar Flow principle involves double filtration of air. Atmospheric air is drawn through pre filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger.
• Double filtered air blow in laminar flow through the work table at designed velocity of 90 ft/min +/- 20%.

Blower Motor Assembly : Statically and dynamically balanced, direct drive, sized to provide adequate air flow volume over the entire surface of HEPA filter. Fitted with 1/4 HP motor and operates with minimum noise level i.e. lower than 65db on scale and vibration less than 2.5 um. (0.0001 deg).

Lighting : Work area properly illuminated by diffused glare free fluorescent light supplied with glass inlet, Front Door, Manometer, Wheel for easy movement, UV Lamp.Power Requirement: 230 V, Single Phase, 50 Hz AC Supply

Size : Horizontal & Vertical.

Optional accessories suitable for both models :

• Satin finish S.S. Table Top (In lieu of Formica top) Up to HL-22/HL-32
• Satin finish S.S. Table Top (In lieu of Formica top) Up to HL-42/HL-62
• Exhaust system & ducting Assembly

Fret not! we are here to help you out with the payment procedures. Be it online payment procedure, cash, bank deposits or others, we are here to assist you all the way through the payment process. We are actively engaged in supplying exemplary range of products from our ultramodern warehousing facility in chennai(india).