Our Products
DOSTEC-40 dosing pumps are heavy duty, high precession, motor driven diaphragm pumps for dosing liquid products.
This series allows many injection possibilities depending on the head being chosen. The available heads are: 25, 50, 100, 200, 300 & 500 l/hr for the piston series, and 25, 50, 100, 200, 300 l/hr for the Diaphragm series.
DOSTEC-40 dosing pumps are manufactured with materials that can resist most chemicals. They are designed for all sorts of processes where it is necessary to dose a product into a hydraulic network, such as food, textile, chemical industry, water treatment etc.
Cylinder:P.P / AISI 316 / PVDF / PTFE
Diaphragm:Elastomer base reinforced with fiber and P.T.F.E clothing
Piston:Ceramic /PEUHMW Sealing:FPM
Valve (body):P.P / AISI 316 / PVDF / PTFE
Valve (ball):glass / glass borosilicate / AISI 316
Block:Aluminium cast
CODE | FLOW | PRESSURE | |||||
50Hz | 60Hz | ||||||
l/h | GPH | l/h | GPH | bar | PSI | ||
Piston | 60-AP11-P24_ _L | 2,5 | 0.6 | 3 | 0.8 | 20/15 | 217 |
60-AP13-P24_ _L | 5 | 1.3 | 6 | 1.6 | 20/15 | 217 | |
60-AP14-P24_ _L | 9 | 2.4 | 10.5 | 2.7 | 20/15 | 217 | |
60-AP33-P24_ _L | 15 | 4 | 18 | 4.7 | 20/15 | 217 | |
60-AP34-P24_ _L | 25 | 6.6 | 30 | 8 | 20/15 | 217 | |
*60-AP53-P24_ _L | 36 | 9.5 | - | - | 15 | 217 | |
60-AP44-P24_ _L | 50 | 13.2 | 60 | 16 | 15 | 217 | |
*60-AP53-P34_ _M | 72 | 19 | - | - | 15 | 217 | |
60-AP44-P34_ _M | 100 | 26.4 | 120 | 31.7 | 15 | 120 | |
*60-AP54-P34_ _M | 120 | 31.7 | - | - | 15 | 217 | |
*60-AP53-P49_ _M | 144 | 38.7 | - | - | 11 | 160 | |
60-AP44-P49_ _M | 200 | 52.8 | 240 | 63.4 | 11 | 160 | |
60-AP54-P49_ _M | 240 | 63.4 | 288 | 76 | 11 | 160 | |
60-AP44-P61_ _M | 300 | 79 | 360 | 95 | 7 | 100 | |
*60-AP54-P61_ _M | 360 | 95 | - | - | 7 | 100 | |
60-AP44-P77_ _M | 500 | 132 | 600 | 158 | 4.5 | 65 | |
*60-AP54-P77_ _M | 600 | 158 | - | - | 4 | 58 | |
Diaphragm | 60-AD11-D69_ _L | 5,5-8 | 1.4-2.1 | 6.5-9.5 | 1.7-2.5 | 15 | 217 |
60-AD21-D69_ _L | 9,5-13 | 2.5-3.4 | 11.5-15.5 | 3-4 | 15 | 217 | |
60-AD31-D69_ _L | 16-22 | 4.2-5.8 | 19-26 | 5-7 | 15 | 217 | |
60-AD41-D69_ _L | 32-44 | 8.4-11.6 | 38-53 | 9.6-14 | 15 | 217 | |
*60-AD51-D69_ _L | 38-53 | 10-14 | - | - | 15 | 217 | |
60-AD42-D69_ _M | 57-77 | 15-20.3 | 68-92 | 18-24.6 | 10 | 145 | |
60-AD43-D69_ _M | 69-93 | 18.2-24.5 | 83-111 | 22-29.4 | 10 | 145 | |
*60-AD51-D95_ _M | 83-104 | 22.7-27.5 | - | - | 8 | 116 | |
60-AD42-D95_ _M | 120-144 | 31.7-38 | 114-173 | 38-45.6 | 8 | 116 | |
60-AD43-D95_ _M | 144-174 | 38-46 | 173-209 | 45.6-55 | 8 | 116 | |
*60-AD53-D95_ _M | 173-209 | 45.7-55.2 | - | - | 8 | 116 | |
60-AD42-D115_ _M | 209-237 | 55.2-62.6 | 251-284 | 66-75 | 5 | 72 | |
60-AD43-D115_ _M | 251-285 | 66.3-75.3 | 301-342 | 79-90 | 5 | 72 | |
*60-AD53-D115_ _M | 301-342 | 79.5-90.3 | - | - | 5 | 72 |
The Electrofertic dosing pumps are motor driven piston pumps for dosing, made up of a worm gear reducer and one or two injection modules of 500, 750 or 1000 liter/hour with electronic regulation by means of a frequency Inverter.
The dosing flow can be regulated from 10% to 100%.
It is manufactured with materials which can resist any chemical. It is designed for all sorts of processes where it is necessary to dose a product into a hydraulic network, such as food, textile, chemical industry, water treatment, etc.
MATERIALS
Cylinder: P.P / AISI 316 / PVDF / PTFEDiaphragm: Elastomer base reinforced with fiber and P.T.F.E clothingPiston: Ceramic / PEUHMW Sealing: FPMValve (body): P.P / AISI 316 / PVDF / PTFEValve (ball): glass / glass borosilicate / AISI 316