Sandur Fluid Controls Pvt. Ltd.

Yeshwanthpur, Bangalore, Karnataka

Electronic Dosing Pump metering pumps are solenoid driven and are controlled electronically by a PCB. The only moving part in the pump is the solenoid armature, with a maximum movement of 1.25 mm.

n the E & B range of pumps, the frequency can be varied between 4% & 100% and the stroke length between 10% & 100%. Thus, pump can operate in the range of 0.4% to 100% of the rated capacity. While the frequency can be adjusted in steps of 25%, 50% and 100%, the stroke length can be varied from 10% to 100% in CC3 series.

The pump also has an inbuilt facility for automatic control of dosing and can accept pulse signals or analogue signals of 0/4-20mA. The pump also has the additional feature for low-level indication in the dosing tank.

The pump is suitable for a power supply of single phase, 230V (AC).

• Die-casting aluminium powder coated pump body
• 0% to 100% Stroke frequency adjustment
• 10% to 100% stroke length adjustment
• Can accept pulse & 4-20mA signals
• 0.44 LPH to 54.60 LPH Capacity
• Maximum pressure of 25 Kgf/cm2

*Compact Size *Double Ball Check Valves *High Quality, Long lasting re-inforced PTFE Diaphragm *Maximum stroke length of only 1.25mm, hence maintenance free *Nolubrication needed *Discharge Rage Accuracy 1% *Handles any chemical *Can accept Potential Free Pulses and 4-20 mA signals *Discharge Countdown Ratio of 1:250 *Suitable for single phase power supply of 230V (C).

Sandur Electromagnetic Dosing / Metering Pumps are solenoid driven and are controlled electronically by a PCB. The only moving part in the pump is the solenoid armature, with a maximum movement of 1.25 mm. There are no rotating parts in the pump and hence, no lubrication is needed. The wear and tear is negligible and the pump is virtually maintenance free.

The diaphragm is made up of high quality nylon fabric reinforced EPDM with moulded steel core and has layer of PTFE on the liquid contact area.

• High Quality Plastic pump body
• 0% to 100% Stroke frequency adjustment
• 10% to 100% stroke length adjustment
• Can accept pulse & 4-20mA signals
• 0.156 LPH to 11.40 LPH Capacity
• Maximum pressure of 20 Kgf/cm2

PRODUCT FEATURE

*Compact Size *Double Ball Check Valves *High Quality, Long lasting re-inforced PTFE Diaphragm *Maximum stroke length of only 1.25mm, hence maintenance free *Nolubrication needed *Discharge Rage Accuracy 1% *Handles any chemical *Can accept Potential Free Pulses and 4-20 mA signals *Discharge Countdown Ratio of 1:250 *Suitable for single phase power supply of 230V (C).

• Pump heads are offered in PVC, PP, PTFE, Acrylic, MS & SS depending on the chemical to be handled.
• The shipping weights indicated above are for PVC, PP, PTFE & Acrylic pump heads and will vary for SS & MS.
• To select pump for specific application, following data is required.
  • Chemical to be handled
  • Capacity (litre/hr)
  • Systems back pressure (bar)
• A wide range of accessories such as foot valve, dosing valve, check valve, pressure retaining valve, anti-siphon valve, pulsation dampener, level sensor, tank etc. are available on request to complete dosing system

Sandur electromagnetic dosing/metering pumps are solenoid driven and are controlled electronically by a PCB. The only moving part in the pump is the solenoid armature, with a maximum movement of 1.25 mm. There are no rotating parts in the pump and hence, no lubrication is needed. The wear and tear is negligible and the pump is virtually maintenance free.

• High Quality Plastic pump body
• 25%, 50%&100% Stroke frequency adjustment
• 10% to 100% stroke length adjustment
• 0.54 LPH to 11.40 LPH Capacity
• Maximum pressure of 20 Kgf/cm2

*Compact Size *Double Ball Check Valves *High Quality, Long lasting re-inforced PTFE Diaphragm *Maximum stroke length of only 1.25mm, hence maintenance free *Nolubrication needed *Discharge Rage Accuracy 1% *Handles any chemical *Can accept Potential Free Pulses and 4-20 mA signals *Discharge Countdown Ratio of 1:250 *Suitable for single phase power supply of 230V (C).

• Pump heads are offered in PVC, PP, PTFE, Acrylic, MS & SS depending on the chemical to be handled.
• The shipping weights indicated above are for PVC, PP, PTFE & Acrylic pump heads and will vary for SS & MS.
• To select pump for specific application, following data is required.
  • Chemical to be handled
  • Capacity (litre/hr)
  • Systems back pressure (bar)
• A wide range of accessories such as foot valve, dosing valve, check valve, pressure retaining valve, anti-siphon valve, pulsation dampener, level sensor, tank etc. are available on request to complete dosing system

FEATURES :

Systems range from a basic single pump with manifold pipping on a base plate, to multiple tanks and pumps piped on a common skid with complete controls. Designs cover a wide range of capacities and materials to suit any application and industrial environment.

DESIGN :

Sandur Fluid Controls extensive experience in packaged systems. We can custom-build system to supplied specifications or assist with the design of a dependable, totally integrated package.

DOCUMENTATION :

Every system manufactured at Sandur Fluid Controls includes complete documentation. This encompasses custom system drawings produced using the latest design software, and can range from:

OTHER ADVANTAGES:

• General Arrangement
• Fabrication
• Piping
• Electrical

A portion of all custom system documentation pertains to inspection and testing, and this meets Sandur stringent quality assurance requirements.

DOSTEC-40 dosing pumps are heavy duty, high precession, motor driven diaphragm pumps for dosing liquid products.

DOSTEC-50 dosing pumps are heavy duty, high precession, motor driven diaphragm pumps for dosing liquid products.