Sandhya Enterprises Manufacturer and Supplier of Dam Gate Seal as per Customer requirement. 1. Solid Bulb Rubber Seal. 25mm Dia to 50mm Dia 2. Hello Bulb Rubber Seal 25mm Dia to 50mm Dia 3. Teflon Claded Rubber Seal -25mm Dia to 50mm Dia 4. Brass Claded Rubber Seal -25mm Dia to 50mm Dia 5. SS Claded Rubber Seal-25mm Dia to 50mm Dia. 6. Z Type Dam Gate Rubber Seal 7. P Type Dam Gate Rubber Seal. 8. Bottom Dam Gate Seal 5mm to 50mm Thick x 200m Width 9. Corner Dam Gate Seal 10 Double Bulb Dam Gate Seal.

DI PIPE GASKET

Sandhya Enterprises Manufacturer and Supplier of DI Pipe Gasket

Expansion Joints

PVC, PP & Plastic Products

Fly Ash Rubber Hose

Sandhya Enterprises Manufacturer and Supplier of Rubber Suction Hose. Water Suction Hose, Fly Ash Hose, Cement Feeding Hose, Bulk Material Hose, Slurry Hose, Mud Hose, Sand and Grovel Hose, Fire and Fighting Rubber Suction Hose, Hot Water Hose, Rubber Duct Hose. size:4" ID and 5" ID length 15Mtr max

Slurry And Mud Rubber Hose

Sandhya Enterprises manufacturer and Supplier of Slurry and Mud Rubber Hose.\r\nRubber Hose for Cement Grouting\r\nMEETS IS : 5137\r\nW.P. 10kgf/cm2\r\nMIN. B.P. 40 kgf/cm2\r\n25.0\r\n31.0\r\n38.0\r\n50.0\r\n63.0\r\n75.0\r\nTube : Highly abrasion resistant soft natural rubber\r\ncompound.\r\nReinforcement : Woven/Braided or spirally wound\r\ntextile of high strength synthetic fibres.\r\nElectrical bonding : low resistant electrical\r\nbonding wire in-corporated between the\r\nreinforcement plies to pro vide electrical continuity along\r\nthe whole length of the hose.\r\nCover : Cloth marked finish cover, resistant to weather\r\nand abrasion.\r\nUsed for cement Grouting at irrigations\r\nprojects, buildings sites, bridges etc.\r\nService Temp. Range : -400 F to + 1580 F.\r\n\r\nsize: 3\" ID to 12\" ID\r\n3\" ID x 5Mtr (LG) with Soft End\r\n3\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n4\" ID x 5Mtr (LG) with Soft End\r\n4\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n5\" ID x 5Mtr (LG) with Soft End\r\n5\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n6\" ID x 5Mtr (LG) with Soft End\r\n6\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n8\" ID x 5Mtr (LG) with Soft End\r\n8\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n10\" ID x 5Mtr (LG) with Soft End\r\n10\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n12\" ID x 5Mtr (LG) with Soft End\r\n12\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n14\" ID x 4Mtr (LG) with Soft End\r\n14\" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n16\" ID x 4Mtr (LG) with Soft End\r\n16\" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150#

Cement Fedding Rubber Hose

Sandhya ERubber Hose for Cement Grouting\r\nMEETS IS : 5137\r\nW.P. 10kgf/cm2\r\nMIN. B.P. 40 kgf/cm2\r\n25.0\r\n31.0\r\n38.0\r\n50.0\r\n63.0\r\n75.0\r\nTube : Highly abrasion resistant soft natural rubber\r\ncompound.\r\nReinforcement : Woven/Braided or spirally wound\r\ntextile of high strength synthetic fibres.\r\nElectrical bonding : low resistant electrical\r\nbonding wire in-corporated between the\r\nreinforcement plies to pro vide electrical continuity along\r\nthe whole length of the hose.\r\nCover : Cloth marked finish cover, resistant to weather\r\nand abrasion.\r\nUsed for cement Grouting at irrigations\r\nprojects, buildings sites, bridges etc.\r\nService Temp. Range : -400 F to + 1580 F.nterpriese Manufacturer of Cement Feeding Rubber Suction Hose.\r\nsize: 3\" ID to 12\" ID\r\n3\" ID x 5Mtr (LG) with Soft End\r\n3\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n4\" ID x 5Mtr (LG) with Soft End\r\n4\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n5\" ID x 5Mtr (LG) with Soft End\r\n5\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n6\" ID x 5Mtr (LG) with Soft End\r\n6\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n8\" ID x 5Mtr (LG) with Soft End\r\n8\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n10\" ID x 5Mtr (LG) with Soft End\r\n10\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n12\" ID x 5Mtr (LG) with Soft End\r\n12\" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n14\" ID x 4Mtr (LG) with Soft End\r\n14\" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150#\r\n16\" ID x 4Mtr (LG) with Soft End\r\n16\" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150#

RUBBER EXPANDION JOINT BELLOW

Sandhya Enterprises Manufacturer and Supplier of Rubbr Expansion Joint Bellow as per Cutomer Ruquirement 25mm NB to 1000mm NB Both Side Soft End Both Side Rubber Flange Both Side Metal Flange. PERFORMANCEAND CONSTRUCTION FEATURES Ã¯ï¿½Â· Test pressure upto 24 bar (upto 300NB) Ã¯ï¿½Â· Cyclic movement test for 5000 cycles under design pressure conducted on sizes 1600NB, 2100NB and 2200NB bellows. Ã¯ï¿½Â· Manufactured sizes upto 3600mm (144 inches)*. Ã¯ï¿½Â· Safety factor built in upto4:1. Ã¯ï¿½Â· Low spring rates. Ã¯ï¿½Â· Greater movement per arch. Ã¯ï¿½Â· Manufactured in single or multiple arches. Ã¯ï¿½Â· Choice of eight liner elastomers Ã¯ï¿½Â· Choice of cover to match liner materials or different materials for better resistance to external conditions. Ã¯ï¿½Â· Filled or unfilled arches. Ã¯ï¿½Â· Galvanised carbon steel or stainless steel split backup rings. Ã¯ï¿½Â· Can be built with permanent offset to compensate for existing or designed piping misalignment

PVC Water Stopper

Sandhya Enterprises Manuacturer and Supplier of PVC Water Stopper.\r\nsize: \r\nThic\r\nCompounding of Waterstops:\r\nWaterstops are manufactured from Anti-Ageing customized plastic compound with PVC as a base polymer and exhibiting required properties like High Elasticity & Tensile Strength, Immune to Corrosion, Excellent weather resistant, Unaffected by acids, alkalis, metals salts and other chemicals, Lower water absorption, Withstand high Hydrostatic pressure, Can bear shocks of heavy turbines, Earth quakes, Floods.\r\nApplication in construction Industry\r\nÃ¯ï¿½Â· PVC Waterstops act as sealant at RCC Masonry concrete joints & prevent any seepage of water in or out through joints.\r\nÃ¯ï¿½Â· PVC Water stoppers withstand expansion or contraction movement at joints and take care of any deflection or displacement arising due to change in temperature, differential settlement of foundation, Geo disturbances causing Seismic forces like earth quack, thus eliminating danger of cracks.\r\nSelection of appropriate Waterstop:\r\n1. Ribbed Type- multipurpose waterstop design, used where differential settlement of poured concrete is expected and a firm grip in concrete is desired.\r\n2. Dumbbell Type- Greater variation in temperature causes expansion or contraction of joints, Dumbbell type waterstop is suggested for these sites.\r\n3. Kicker (Surface) Type: these are externally placed and are use where embedded types can not be used due to interference of steel reinforcement.\r\nInstallation procedure:\r\nWater Stoppers are tied to steel frame work through eyelets by means of small wires (same being depicted in the adjacent figure), certain metal clamps meant to grip the water stop seal and keep it in proper position.\r\nFirstly one half of the waterstop is embedded in the concrete leaving the second half extended. Second half is also embedded leaving the centre bulb free for expansion and contraction movements.\r\nArea of Application:\r\nÃ¯ï¿½Â· Public Utilities : Bridges, Road Embankments, Tunnels, Water Tanks, Swimming Pools, Water Filtration plants, Swage Plants, Clarifiers, Dams, Canals, Aqueducts, Reservoirs, Irrigation Projects Cooling Towers.\r\nÃ¯ï¿½Â· Building: Basements, Foundations Slabs, Masonry Joints, Terraces, Retaining Walls, Overhead & Underground Water Tanks, Skyscraper.\r\nÃ¯ï¿½Â· Industries: Chemical Plants, Fertiliser Steel, Waste Treatment Plants, Thermal & Hydro Power Stations, Atomic Reactors, Shipyards & Docks.\r\nPrecautions during water stop installation:\r\nÃ¯ï¿½Â· They are vulnerable to get damaged during construction.\r\nÃ¯ï¿½Â· Compact

Elastomeric Bridge Bearing

Sandhya Enterprises Manufacturer and Supplierof Bridge Bearing Pad as per MoRTH, IRC 83 (Part II) 1987 and UIC 772 2R. Thickness 25mm to 144mm SANDHYA ENTERPRISES Plot No 5-24-1223/5/1, Ambedkar Nagar, Gajuramaram, R.R. Dist.500055, Hyderabad,Telangana State. India Profile We are pleased to introduce ourselves as Rubber Sheet, Textile Braided hose, Rubber Suction Hose, Elastomeric Bridge Bearing, Rubber Moulded products, Extruded Products and PVC Water Stop, Bridge Expansion Joint. We have leading and reputed consumer as our valued customers. It will be our pleasure If we can be of any service to your good selves and welcome your inquiries for your requirements. Our service is well established with the, Cement industries, Granites industries, Electric Power Industries, Ready Mix Industries, Construction Company and Civil Construction Works. We go through the test certificate, Physical Properties, Processing condition of the finished goods, grades etc and after looking at the final product we confidently recommended our valued customer to buy the product. Plot No 5-24-1223/5/1, Ambedkar Nagar, Gajuramaram, R.R. Dist.500055,Hyderabad Telangana State. India Email ID: sandhyaprises@gmail.com, web:www.sandhyaprises.in Contact No:+91-9652998932 ,9550921831 SANDHYA ENTERPRISES ELASTIC MODULUSE TEST 10MPa to 20MPa Ultimate Compression Strength 60MPa Adhesion Strength (Stripping Test) at 4MPa VL and 3MPa HL Shear Modulus Test 5MPa VL and HL load 2H Plot No 5-24-1223/5/1, Ambedkar Nagar, Gajuramaram, R.R. Dist.500055,Hyderabad Telangana State. India Email ID: sandhyaprises@gmail.com, web:www.sandhyaprises.in Contact No:+91-9652998932 ,9550921831 Technical Details Sr No. Test Unit Specification and Testing Method Specimens 1 Hardness IRHD IS: 3400 (Part II) Cl.5.1.2.2 4.0mm (min ) thickness of Test specimen 2 Tensile Strength MPa IS:3400 ( Part I) Table 1 Type -1 Thick- 2.0 +.0.20mm Width 6.0 + 0.40mm Bench Mark-25..0mm (max) 3 Elongation at Break % 4 Adhesion Strength (Metal to Rubber KN/M IS:3400 ( Part XIV) Cl.3.3 Length -125mm Width-25mm 5 Ash Content % IS:3400 (Part XXII) Cl. A-8.3.1 IS 1 g (min) 6 Polymer Identification Chemically 0.5 g (min) 7 Percentage of Polymers % 1 g (min) 8 Compression Set % IS: 3400 (Part X) Cl. 5.1 Thick -12.5 + 0.50mm Dia-29 + 0.50mm 9 Elastic Modulus MPa IRC 83 (Part II) 1987, UIC 772 -2R and MORTH 2 Nos from Finish Product 10 Shear Modulus MPa 11 Ultimate Compression Strength MPa One Specimen size of 100x200mm (Cutting Piece from

Rubber Beading

Rubber Mats

Plastic Component

Fly Ash Hose

Sandhya Enterprises Manufacturer and Supplier of Rubber Fly Ash Hose, For Ready Mix Company, Bulker Fly Ash Hose, size: 3" ID to 12" ID 3" ID x 5Mtr (LG) with Soft End 3" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150# 4" ID x 5Mtr (LG) with Soft End 4" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150# 5" ID x 5Mtr (LG) with Soft End 5" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150# 6" ID x 5Mtr (LG) with Soft End 6" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150# 8" ID x 5Mtr (LG) with Soft End 8" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150# 10" ID x 5Mtr (LG) with Soft End 10" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150# 12" ID x 5Mtr (LG) with Soft End 12" ID x 5Mtr (LG) with Both Side MS Flange as per ASA 150# 14" ID x 4Mtr (LG) with Soft End 14" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150# 16" ID x 4Mtr (LG) with Soft End 16" ID x 4Mtr (LG) with Both Side MS Flange as per ASA 150# Working Pressure 10.0 Kg./cm (Bar) Del every: within one week

Silicone Rubber Products

Rubber Hoses

Bearings

Compression Molded Rubber

Sanitary Ware & Fittings

RUBBER STRIP

SANDHYA ENTERPRISES MANUFACTURER AND SUPPLIERS OF RUBBER STRIP AS PER CUSTOMER REQUIREMENT

Hoses, Hose Assemblies & Fittings

Polyethylene Sheet

Agricultural Pipes

PVC Granules

Textile Braided Rubber Hsoe

Sandhya Enterprises Manufacturer and Supplier of Textile/Yarn Braided Hose.\r\nGeneral Purpose Rubber Water Hose\r\nIS:444-Type-1\r\nW.P. 6 kgf/cm2\r\nMIN. B.P. 19 kgf/cm2\r\nIS:444-Type-2\r\nW.P. 10 kgf/cm2\r\nMIN. B.P. 32 kgf/cm2\r\nIS:444-3A\r\nW.P.: 25 kgf/cm2\r\nMIN. B.P. 80 kgf/cm2\r\nGeneral Purpose Car Washing Hose\r\nIS:444-Type-3B\r\nW.P. 25 kgf/cm2\r\nMIN. B.P. 80 kgf/cm2\r\n10.0\r\n12.5\r\n20.0\r\n25.0\r\n31.5\r\n38.0\r\n50.0\r\n63.0\r\n75.0\r\n100.0\r\nTube : Uniform seamless lining of natural or blend of\r\nnatural & synthetic rubber.\r\nReinforcement : Plies of woven fabric or braiding\r\ntextile of high strength synthetic fibre.\r\nCover : Black, smooth, cloth marked finish plain or\r\nribbed cover of weather and abrasion resistant\r\nrubber. Type 3B Hoses have oil resistant outer cover.\r\nType-1, Type-3A, Type-3B are ISI Marked up to 50mm\r\nNB and Type-2 is ISI Marked up to 100mm NB.\r\nThis Hose used for water delivery purpose has a\r\nwide range of applications in various idustries\r\nlike Mines, Dam, Railway, Construction sites and\r\ncalamities such as Fire Fighting etc.\r\nType 3B hoses are used in the\r\nautomobile service centre for car\r\nwashing.\r\nService Tem. Range :-400F to +1580F.\r\nRubber Air Hose\r\nIS:446-1\r\nW.P. 7 kgf/cm2\r\nMIN. B.P. 28 kgf/cm2\r\nRubber Air Hose Pneumatic Purpose\r\nIS:446 Type-2\r\nW.P. 10 kgf/cm2\r\nMIN. B.P. 40 kgf/cm2\r\nRubber Air Hose For Rock Drilling\r\nIS:446-Type-3\r\nW.P.: 14 kgf/cm2\r\nMIN. B.P. 56 kgf/cm2\r\n12.5*\r\n20.0*\r\n25.0*\r\n31.5*\r\n38.0*\r\n45.0\r\n50.0\r\n56.0\r\n63.0\r\n75.0\r\n100.0\r\nTube : Uniform seamless lining Made from blend of\r\nnatural & synthetic rubber compound. In addition for\r\nType-3 lining is resistant to oil mist.\r\nReinforcement : Plies of woven fabric or braiding\r\ntextile of high strength synthetic fibre.\r\nCover : Black, smooth, cloth marked finish plain or\r\nribbed cover of weather and abrasion resistant\r\nrubber. compound.\r\n*These sizes are ISI Marked in Type-2 & Type-3\r\nType-1 & 2 Used with Compressors and other\r\nequipment as pnematic tools for engineering\r\npurpose\r\nType 3 Hoses used for Drilling Purpose in deep\r\nexcavations operations.\r\nService Tem. Range :-400 F to+1580 F.\r\nRubber Hose for Welding\r\nIS:447\r\nW.P. 12.5 kgf/cm2\r\nMIN. B.P. 50 kgf/cm2\r\n5.0\r\n6.0\r\n8.0\r\n10.0\r\n12.5\r\nTube : Uniform seamless tube of natural/synthetic\r\nrubber resistant to fuel gas (oxygen) and other non\r\ncombustible gases.\r\nReinforcement : Plies of woven fabric or braiding\r\ntextile of high strength synthetic fibre.\r\nCover : Natural/synthetic rubber.\r\nUsed for gas welding purpose\r\n(Blue Color Hose used for Oxygen and Red colour\r\nfor non combustible gases)\r\nService Tem. Range :-400 F to+1580 F.

Sand Balst Hose

Sandhya Enterprises manufacturer and Supplier of Sand Balst Rubber Hose.\r\nRubber Hose for Sand Blasting\r\nIS : 5894 TYPE 1\r\nW.P. 7kgf/cm2\r\nMIN. B.P. 35kgf/cm2\r\nIS : 5894 type 2\r\nCM/L - 8523880\r\nW.P.10kgf/cm2\r\nMIN. B.P. 50kgf/cm2\r\n20.0*\r\n25.0*\r\n31.5*\r\n38.0*\r\n45.0*\r\n50.0*\r\n56.0\r\n63.0\r\n75.0\r\n100.0\r\nTube : Extra thick seamless tube of soft\r\nnatural rubber compound of high tensile strength,\r\nexcellent abrasion resistant and free from any\r\nmineral filler.\r\nReinforcement : Plies of woven textile of high strength\r\nnatural or synthetic fibre.\r\nElectrical Bonding : Low resistant electrical\r\nbonding wire in-corporated between the\r\nreinforcement plies to provide electrical continuity along\r\nthe whole length of the hose.\r\nCover : Natural/synthetic Rubber, cloth marked\r\nfinish.\r\n*These size are ISI marked\r\nThis hose used for sand/shot blasting\r\napplications for conveying sand and other\r\nabrasive materials at high velocity in heavy\r\nengineering industries, ordnance factories etc.\r\nService Temp. Range : -400 F to + 1580 F.

Rubber Speed Breaker

Sandhya Enterprises Manufacturer and Supplier s of Rubber Speed Breaker,500x400x50mm, Color: Black and Yellow

POT PTFE BRIDGE BEARING

POT PTFE BEARING is a bearing which carries vertical load by compression on an elastomeric disc confined in a steel cylinder and which accommodates rotations by deformations of the disc. The elastomer under a triaxial pressure offers low resistance to deformation but high vertical stiffness. POT PTFE Bearings are capable of bearing vertical load, horizontal forces and allows movement as well as rotation alongany horizontal axis. These type of bearings are in huge demand for road, bridge, auditoriums, skywalks etc.

Industrial Seals

Cladding Materials And Building Panels

Marine Hardwares

Bellow Expansion Joint

Road Safety & Traffic Products

Wood And Lumber

Rubber Pad

Railing Fittings, Staircase And Parts

Speed Bumps

Sanitary Fittings

PVC, HDPE, FRP & Plastic Pipes

Railway Track Fitting

Crystallization Based Waterproofing System

Electrical Insulating Mat

Sandhya Enterprises Manufacturer and Supplier of Electrical Insulating mat.

Oil Suction Discharge Hose

Sandhya Enterprises Manufacturer and Supplier of Oil Suction Discharge hose.\r\nOil Suction & Discharge Service\r\nHose\r\n(For Dock and Offshore operation)\r\nMEETS IS:8189\r\n(Rough & Smooth Bore)\r\nW.P. 7kgf/cm2\r\nMIN B.P. 28kgf/cm2\r\nW.P. 10kgf/cm2\r\nMIN B.P. 40kgf/cm2\r\nW.P. 15kgf/cm2\r\nMIN B.P. 60kgf/cm2\r\n63.0\r\n75.0\r\n100.0\r\n125.0\r\n150.0\r\n200.0\r\n250.0\r\n300.0\r\n350.0\r\n400.0\r\nTube : Uniform Lining of suitable rubber compound\r\nhighly resistant to all grades of Petroleum and\r\nblended Products having aromatic hydrocarbon\r\ncontent not more than 25%.\r\nReinforcement : Plies of woven textile which is\r\nwell rubberized from both sides with a suitable\r\nrubber compound and a helical GS wire embedded\r\nbetween the fabric plies in case of smooth bore\r\nand in rough bore hose first is internal and second\r\nis embedded.\r\nElectrical Bonding : Low resistant electrical\r\nbonding wire is in-corporated between the\r\nreinforcement plies to provide electrical continuity\r\nalong the whole length of the Hose.\r\nCover : Plain or Corrugated outer cover having cloth\r\nmarked finish with a suitable rubber compound\r\nresistant to abrasion weather and Oil.\r\nEnd Connection : The Hose has built in nipples\r\nwith orwithout flanges as per customer\r\nrequirement.\r\nThis Hose used for dock and offshore operations\r\nof petroleum products containing not more than\r\n25% aromatic hydrocarbon.\r\nService Temp. Range : -400F to + 1580 F.\r\nElectrically Bonded Road & Rail\r\nTanker Hose of Rubber, Resistant\r\nto Petroleum Products.\r\nMEETS IS: 10733\r\nType-1A&B/Type-2A&B/Type-3\r\n(Rough & Smooth Bore)\r\n31.5\r\n38.0\r\n50.0\r\n63.0\r\n75.0\r\n100.0\r\nTube : Uniform seamless Lining of suitable rubber\r\ncompounding highly resistant to Petroleum Products.\r\nReinforcement : Plies of woven textile which is\r\nwellrubberized from both sides with a suitable\r\nrubber compound and a helical GS wire embedded\r\nbetween the fabric plies.\r\nElectrical Bonding : Low resistant electrical\r\nbonding wire is in-corporated between the\r\nreinforcement plies to provide electrical continuity\r\nalong the whole length of the hose.\r\nCover : Smooth/ Corrugated synthetic rubber\r\ncompound which is resistant to weather, abrasion\r\nand petroleum products.\r\nEnd Connection : Hose can be supplied with built\r\nin nipple, with or without flanges.\r\nThis hose used for loading/unloading of\r\nRoad / Rail Tanker carrying Petroleum and blended\r\nproducts which have an aromatic hydrocarbon\r\ncontent of maximum 25%\r\nService Temp. Range : -400F to + 1580 F.

Carbon Free Rubber Hose

Sandhya Enterprises Manufacturer and Supplier of Carbon Free Rubber Hose.\r\nCarbon Free/Heat Resistant\r\nCable Coolant Rubber Hose.\r\nW.P. 10kgf/cm2\r\nMIN. B.P. 40kgf/cm2\r\n12.5\r\n20.0\r\n25.0\r\n31.5\r\n38.0\r\n50.0\r\n63.0\r\n75.0\r\n90.0\r\n105.0\r\nTube : white / black smooth non conductive rubber\r\ncompound heat & electrical resistant.\r\nReinforcement : Rubberised woven textile fabric/\r\nnatural/synthetic.\r\nCover : heat and electrical resistant rubber compound\r\nwith/without asbestos cover.\r\nThis hose is specially designed for service in\r\niron/steel mills, glass works, electrical furnances\r\nand out fields where the hose is required to be\r\nresistant to heat, radiation, and splashes of\r\nhot metal.\r\nService Temp. Range : -400 F to + 1580 F.

Strip Seal Expansion Joint

Sandhya Enterprises Manufacturer and Supplier of Strip Sea Expansion Joint.\\r\\nKey Features:\\r\\nÃ¯ï¿½Â· Mechanically Locked Seal\\r\\nÃ¯ï¿½Â· Continuous Sealing Elements\\r\\nÃ¯ï¿½Â· Racking movement capability (Selective profile of Sealing Element)\\r\\nÃ¯ï¿½Â· Self Debris Expelling Capability\\r\\nÃ¯ï¿½Â· Less prone to Abrasion\\r\\nDescription\\r\\nThe Bridge deck expansion joints is an important element in the functioning of bridge structures. When joints fail to fnction properly they can create problem out of proprtion to their size. Selection of a good joints for use can create fewer bridge maintenance problems there for Indian Ministery of Roads Transport & Highways (MORT& H ) has setup certain guidelines for the Design, Manufacture and Installation of Bridge Expansion Joints in India.\\r\\nTypes Of Bridge Expansion Joints we Design, Manufacture, Supply, Replace, Supervision & Installation\\r\\nÃ¯ï¿½Â· COMPRESSION SEAL JOINT:\\r\\nis used for smaller range movements from 0 to 40mm. It consist of two angles with an elastomeric seal. The seal is installed in compressed position This Joint is ideal for replacement of old joint and for new project.\\r\\nÃ¯ï¿½Â· STRIP SEAL EXPANSION JOINT\\r\\nStrip seal expansion joint is used for medium movement from 0 to 80mm. It consists of two edge profiles with an elastomeric seal in between. The edge profiles are generally cast into a noising of the structure. These joints expected performance life more than twenty five years. This is most popular and expected joint system among Bridge Consultants and Engineers worldwide.\\r\\nDesign Chart\\r\\nSERIES INSTALLATION WIDTH(IW) MOVEMENT(MM) SS-80 40 80 SS-130 60 180

RUBBER CORRER GUARD

Sandhya Enterprises manufacture and supplier of Rubber Corner Guard , Color Yellow and Black

STONE WARE GASKET

SANDHYA ENTERPRISES MANUFACTURER AND SUPPLIER OF STONE WARE GASKET

Yarn Braided Water Hose IS:444

Sandhya Enterprises Manufacturer and Supplier of Yarn Braided Water Hose as per IS:444. size:12mm ID to 50mm

Gaskets

Floor Mats

Cables And Wire Accessories

Metal Angle

Jute & Jute Products

PET Raw Materials

Scaffolding Accessories

Curtain Rod Accessories

Solar Products

Hardware Fittings And Accessories

Insulators, Mineral Wool, Glass Wool & Insulation Materials

Manhole Covers

Drainage Product

Nuts

Fire Fighting Rubber Suction H

Sandhya Enterprises Manufacturer and Supplier of Fire Fighting Rubber Suction Hose with GM Fitting Male and Female as per IS902 size:100mm ID x2.5Mtr (LG)