Our Products
Hand Operated Hydraulic Press
2 Products availableAir Compressor
2 Products availableWelding Machinery
2 Products availableMilling Machines
2 Products availableHydraulic Press
2 Products availableOur Complete range of products are cone pulley drive, RADIAL DRILL LMACHINE, AIR COMPRESS, SALES AND SERVICE and MANUFACTURING OF SPM.
DOUBLE STAGE COMPRESSOR
Model | Piston Displacement | Max. Pressure | No. of | Air Receiver | HP | ||
---|---|---|---|---|---|---|---|
cfm | M3 / H | Kg/CM2G | PSIG | Cylinder | Ltrs | ||
BE-30 T-1 | 7.46 | 12.64 | 10.5 | 150 | 2 | 150 | 2 |
BE 30 T-2 | 9.79 | 16.59 | 12.3 | 175 | 2 | 150 | 3 |
BE 50 T | 17.32 | 29.35 | 12.3 | 175 | 2 | 200 | 5 |
BE 75 T | 26.40 | 44.74 | 12.3 | 175 | 2 | 225 | 7.5 |
BE 100 T | 31.84 | 53.97 | 12.3 | 175 | 2 | 300 | 10 |
BE 150 T-1 | 36.30 | 61.52 | 10.5 | 150 | 2 | 300 | 10 |
BE 150 T-2 | 44.00 | 74.57 | 12.3 | 175 | 2 | 300 | 12.5 |
BE 150 T-3 | 49.50 | 83.90 | 12.3 | 175 | 2 | 300 | 15 |
BE 200 T | 81.80 | 138.64 | 12.3 | 175 | 3 | 500 | 20 |
BE 300 T | 98.19 | 166.42 | 10.5 | 150 | 3 | 500 | 25 |
Chuck Plate Gear Set Centre Adaptor Dead Centers Dial Indicator Square Tool Post Tool Post Key
Optional Accessories:Steady Rest Follow Rest Norton Gear Box Electrical Fittings True Chuck & Dog Chuck Quick Change Tool Post Tapper Turning Attachment Coolant Pump with Tank & Fittings Face Plate Machine Lamp Rear Tool Post Key way Milling Attachment Tool Post Grinder
Length | A.B.C |
---|---|
4.6' | 650 mm |
5.3' | 875 mm |
6'.0" | 1050 mm |
Model | LD 165 | LD 175 |
---|---|---|
Height Of Centre (mm) | 165 | 175 |
Width Of bed (mm) | 238 | 238 |
Max Swing over bed (mm) | 330 | 350 |
Max. Swing over Slide (mm) | 180 | 200 |
Spindle Bore (mm) | 40 | 40 |
Spindle Nose | 8 TPI | 8 TPI |
Spindle Speed 8 (R.P.M.) | 30—825 | 30—825 |
Cross Slide Travel (mm) | 225 | 225 |
Lead screw TPI | 4 TPI | 4 TPI |
Tail Stock Sleeve | MT.3 | MT.3 |
Power Required (H.P.) | 1 | 1 |
Model | SMH-7 |
---|---|
Cutting Round | 150 |
Capacity Square | 125 |
No. of strock Per min | 80 |
Blade size (mm) | 350 |
Approx Weight(Kg) | 150 |
Motor (1440 RPM) | 1 HP |
|
"SANDEEP"heavy duty hand operatred round rack spring controlled arbour press ideally suitable for pressing solid, hollow and eyelet rivelting, staking, flaring, numbering, marking, assembling etc., hence it is extremly useful in all light engineering industries. The press is provided with adjustable stroke automatic spring return of spindle, adjustable spring tensioning device and T slotted base surface. |
Model | No. | SAP-0 | SAP-1 | SAP-2 | SAP-3 |
---|---|---|---|---|---|
Max. Pressure exerted | ton kg |
1/4 250 |
1/2 500 |
3/4 750 |
1 1000 |
Max. distance from Center to back | mm Inch |
50 2 |
70 23⁄4 |
85 33⁄8 |
120 43⁄4 |
Min. height from base to guide | mm Inch |
38 11⁄2 |
82 31⁄4 |
158 61⁄4 |
215 81⁄2 |
Max. height from base to guide | mm Inch |
70 23⁄4 |
140 51⁄2 |
260 101⁄4 |
315 121⁄2 |
Size of Rack | mm Inch |
28 11⁄8 |
35 13⁄8 |
38 11⁄2 |
48 17⁄8 |
Size of rectangular table | mm Inch |
125x95 5x33⁄4 |
175x140 7x51⁄4 |
232x168 91⁄8x65⁄8 |
305x248 12x93⁄4 |
Size of T slott on table | mm Inch |
12 1⁄2 |
12 1⁄2 |
12 1⁄2 |
12 1⁄2 |
Hole in rack | mm Inch |
10 3⁄8 |
12 1⁄2 |
15 5⁄8 |
19 3⁄4 |
length of lever (Handle) | mm Inch |
225 9 |
300 12 |
400 16 |
500 20 |
SANDEEP"hand operatred rack and pinion type arbour presses are designed for production work f quick operation in general engineering workshops, automobile workshops, garages etc. for driving mandrels in and out of work and can also be used for inserting and removing bushes, bearing etc. They do not bend or burr the work or necessitate taking off carrier and will prove saving of time and increased life of arbours, Available in two types as under :Round Rack :Provided with a keyway and screw to prevent the rock turning.Square Rack :Has a larger bearing surface which prolong service life. The machined rack bearing plate is held securely to the body by four large screw, permitting take up for possible wear.
Max. Pressure exerted | Ton Kgs |
1/4 250 |
1/2 500 |
1 1000 |
11⁄2 1500 |
3 3000 |
4 4000 |
Max. distance from Center to back | mm Inch |
115 41⁄2 |
140 51⁄2 |
171 63⁄4 |
190 71⁄2 |
254 10 |
267 101⁄2 |
Max. height from base to guide | mm Inch |
203 77⁄8 |
305 12 |
368 141⁄4 |
406 16 |
559 22 |
660 26 |
Size of Rack round or square | mm Inch |
25 1 |
32 11⁄4 |
38 11⁄2 |
44 13⁄4 |
57 21⁄4 |
60 23⁄8 |
Hole in rack for punch | mm Inch |
12 1⁄2 |
12 1⁄2 |
16 5⁄8 |
16 5⁄8 |
19 3⁄4 |
19 3⁄4 |
SINGLE STAGE COMPRESSOR
Model | Piston Displacement | Max. Pressure | No. of | Air Receiver | HP | ||
---|---|---|---|---|---|---|---|
cfm | M3 / H | Kg/CM2G | PSIG | Cylinder | Ltrs | ||
BE-5 | 2.98 | 5.05 | 7 | 100 | 1 | 45 | 0.5 |
BE-10/1 | 3.73 | 6.32 | 7 | 100 | 1 | 70 | 1 |
BE-10/1 | 3.73 | 6.32 | 7 | 100 | 1 | 70 | 1 |
BE-15/1 | 6.78 | 11.49 | 8.79 | 125 | 1 | 92 | 2 |
BE-30 S | 14.85 | 25.16 | 5.62 | 80 | 2 | 150 | 3 |
BE-75 S-1 | 23.90 | 40.50 | 5.62 | 80 | 2 | 225 | 5 |
BE-75 S-2 | 34.60 | 58.60 | 5.62 | 80 | 2 | 225 | 7.5 |
BE-100S | 52.80 | 89.50 | 5.62 | 80 | 2 | 225 | 10 |
BE-125S | 88.00 | 149.10 | 2.81 | 40 | 2 | 300 | 12.5 |
BE-200S | 148.50 | 251.70 | 2.81 | 40 | 3 | 500 | 20 |
Applications :Plastic Industries - PET Bottles manufacturing units
Power Sector - Circuit breaking / making in electricity board & start up apphcaton for D.G. Sets
ARC Welding Machine (STUD TYPE)
Model | AW-150/l | AW-150/ll | AW-200 | AW-250 | AW-300 | AW-400 |
---|---|---|---|---|---|---|
KVA | 4 | 6 | 8 | 10 | 15 | 21 |
Normal Current Amp. | 150 | 150 | 200 | 250 | 300 | 400 |
Primary Voltage Volts. | 230 | 220/440 | 220/440 | 220/440 | 220/440 | 220/440 |
Phase | 1 | 1-2 | 1-2 | 1-2 | 1-2 | 1-2 |
Frequency Hertz | 50 | 50 | 50 | 50 | 50 | 50 |
Open Circuit Voltage | 50 | 50 | 55 | 55 | 60 | 60 |
Conti. 100% Duty Per Cycle. | 70 | 90 | 120 | 120 | 180 | 240 |
Current 50% Duty Amp. Per Cycle. | 90 | 150 | 200 | 250 | 300 | 400 |
Electrode. | 2 | 2 | 2 | 2 | 2 | 2.5 |
Size | 3.15 | 3.15 | 4 | 5 | 5 | 5 |
Max. Approx. | 325 | 400 | 455 | 455 | 500 | 500 |
Dimension | 410 | 600 | 700 | 700 | 830 | 830 |
Approx. Weight | 260 | 370 | 390 | 390 | 440 | 440 |
Aluminium Wounds. | 27.5 | 43 | 53 | 69 | 82 | 95 |
APPLICATIONS - Spot Welding, electro-brazing, cross wire welding resistance heating and soldering. The machines are also capable of welding stainless steel, brass, phosphor, bronze, alloy steels, etc. Specific details can be sought on request.
|
Machine is Suitable for Mass Production Purpose.
Auto Feed is provided in both directions for Longitudinal movement of table, Vertical & Cross Movement are hand operated
Model | SM-0 | SM-1 | SM-1H | SM-2 | SM-2H |
---|---|---|---|---|---|
Surface of Table (MM) | 800x175 | 900x200 | 1050x250 | 1200x275 | 1300x300 |
No. of T-Slots | 3 | 3 | 3 | 3 | 3 |
Size of T-Slots | ½" | ½" | ½" | ½" | ½" |
Swivel either Side of Table | 45 | 45 | 45 | 45 | 45 |
Cross Traverse (MM) | 150 | 150 | 175 | 200 | 250 |
Vertical Traverse (MM) | 400 | 400 | 450 | 500 | 625 |
Longitudinal Traverse (MM) | 475 | 475 | 525 | 625 | 675 |
Arbour Diameter (MM) | 25.4 | 25.4 | 25.4 | 25.4 | 25.4 |
Taper of Spindle | ISO 40 | ISO 40 | ISO 40 | ISO 40 | ISO 40 |
No. of Spindle Speed | 6 | 6 | 9 | 9 | 9 |
Range of Spindle Speed (RPM) | 40-700 | 40-700 | 40-700 | 40-700 | 40-700 |
Spndle Diameter (MM) | 50 | 70 | 80 | 80 | 90 |
No of Feed in Longitudinal Table Long. | 2 | 2 | 2 | 3 | 3 |
Main Motor Power (HP) | 1 | 1.5 | 2 | 2 | 2 |
Weight (Kgs.) | 450 | 700 | 900 | 1300 | 1900 |
Model | SAGM–2 | SAGM–3 | SAGM–4 | SAGM–5 | SAGM–6 |
---|---|---|---|---|---|
Table | |||||
Working Space mm | 1300x300 | 1400x300 | 1600x350 | 1800x400 | 2000x450 |
T.Slot Nos/Size | 3.16 | 3.22 T NUT | 3.22 T NUT | 3.22 T NUT | 3.22 T NUT |
T.Slot Centre | 70 | 80 | 85 | 90 | 95 |
Swivel | + 45o | + 45o | + 45o | + 45o | + 45o |
Longitudinal Travel By Power X mm | 700 | 800 | 1000 | 1200 | 1300 |
Cross Travel By Power Y mm | 215 | 260 | 340 | 380 | 450 |
Vertical Travel By Power Z mm | 450 | 510 | 600 | 650 | 70 |
FEEDS | |||||
No. of Feeds | 18 | 18 | 18 | 18 | 18 |
Range of Longtitude Feed/Min | 23-420 | 23-420 | 23-420 | 23-420 | 23-420 |
Range of Cross Feed/Min | 23-420 | 23-420 | 23-420 | 23-420 | 23-420 |
Range of Vertcal Feed/Min. | 3-70 | 3-70 | 3-70 | 3-70 | 3-70 |
No. of Rapid Feed | 1 | 1 | 1 | 1 | 1 |
Rapid Long & Cross/ Min. | 1050 | 1050 | 1050 | 1050 | 1050 |
Rapid VerticaL/ Min | 175 | 175 | 175 | 175 | 175 |
SPINDLE | |||||
No. of Spindle Speeds. | 12 | 12 | 12 | 12 | 12 |
Range of Spindle Speeds | 40 to 1200 RPM | 40 to 1200 RPM | 40 to 1200 RPM | 40 to 1200 RPM | 40 to 1200 RPM |
Spindle Taper | ISO-40 | ISO-40 | ISO-40 | ISO-40 | ISO-40 |
Arbor Diameter | 25.4 | 25.4 | 32 | 40 | 40 |
POWER | |||||
Main Motor | 3 H.P | 5 H.P | 7.5 H.P | 10 H.P | 10 H.P |
Feed Motor | 2 H.P | 2 H.P | 3 H.P | 3 H.P | 5 H.P |
Coolant Motor | 0.1 H.P. | 0.1 H.P. | 0.1 H.P. | 0.1 H.P. | 0.1 H.P. |
Model | HS-18 | HS-24 | HS-30 | HS-36 | HS-42 |
---|---|---|---|---|---|
CAPACITY | 18" | 24" | 30" | 36" | 42" |
Length of Ram Stroke (mm) | 457 | 610 | 762 | 915 | 1070 |
Length of Ram (mm) | 960 | 1232 | 1410 | 1651 | 2108 |
Length of Width Ram Bearing | 700x270 | 867x300 | 1020x330 | 1130x330 | 1600x330 |
Table of Ram (mm) | 360x75 | 450x76 | 510x75 | 565x102 | 600x102 |
Working surface of Table (mm) | 457x305 | 610x370 | 762x390 | 915x457 | 1078x533 |
Max. table Travel Horizontal | 488 mm | 635 mm | 787 mm | 940 mm | 1075 |
Max. table Travel-Vertical | 330 mm | 380 mm | 450 mm | 525 mm | 585 |
Angular Movement of Table | 60°L 60°R | 60°L 60°R | 60°L 60°R | 60°L 60°R | 60°L 60°R |
Max Vertical Travel of Tool Slide | 152 mm | 190 mm | 203 mm | 255 mm | 300 mm |
Maximum Swivel of Tool Head | 60°L 60°R | 60°L 60°R | 60°L 60°R | 60°L 60°R | 60°L 60°R |
Dia of Clutch Pulley (mm) | 311 | 311 | 311 | 380 | 380 |
No. of Ram Speeds | 4 | 4 | 4 | 4 | 4 |
(Stroke Per Minute) | 16,32,64,96 | 14,28,42,62 | 8,16,32,48 | 10,20,30,50 | 8,16,32,48 |
Dia of Motor Pulley (mm) | 70 | 70 | 76 | 88 | 88 |
Stroke of Ram | 0.220 | 0.229 | 0.229 | 0-22 TO 0-88 | 0-22 TO 0-88 |
Range of Tool Head Feed | Hand feed | Hand feed | Hand feed | Hand feed | Hand feed |
Main Motor Power (HP/kw) | 2/1.5 | 3/2.25 | 5/3.75 | 7.5/5 | 10/7.5 |
Motor (RPM) Cone Pulley / All Geard | 1440 / 960 | 1440 / 960 | 1440 / 960 | 1440 / 960 | 1440 / 960 |
Weight (approx)(kgs.) | 1200 | 1850 | 2300 | 3500 | 4000 |
Rotary Table with 36:1 Ration (250mm).
Model | SSM–6 | SSM–8 |
---|---|---|
ADJUSTABLE Stroke (mm) | 10 to 150 | 10 to 250 |
Longitudinal Movement (mm) | 200 | 230 |
Cross Movement (mm) | 110 | 230 |
Speed adjustment (Speed) | 3 | 3 |
Ram Adjustment (mm) | 150 | 250 |
Motor(HP) | 1 | 1.5 |
Column to RAM Dist. (mm) | 210 | 330 |
Table to RAM Dist. (mm) | 310 | 410 |
Table size (mm) | 280x335 | 280x335 |
Machine Dimension | 1050x550x1175 | 1150x600x1375 |
Machine weight (kg) | 375 | 450 |
The Presses have good rigid structure for accurate works
POWER PACK UNIT:Our Presses are powered by specially designed Power Pack Unit having Oil Breather (Hydroline), Oil Level Indicator (Hydroline), Suction Strainer (Hydroline), Gear Pump (Bosch Rexroth), Flexible Coupling (Jeck Tech), Electric Motor (Crompton / Siemens), Hand Lever operated Direction Control Valve (Bosch Rexroth), Pressure Gauge (Air Master), Return Line Filter (Hydroline), Oil Tank (without oil), Internal & External Pipe Line etc.
HYDRAULIC CYLINDER:Our Presses are powered by specially designed Double Acting Hydraulic Cylinders. Cylinders manufactured out of quality steel. Cylinder Bores will be honed to mirror finish or long life of piston seals. All chevron seals & bronze strip used for leak proof performance Ram will be made from EN-8 material & surface ground hardened for long life of seals & corrosion resistance.
Capacity in Tonnes | Bed Size | Throat | Day-Light | Stroke | Motor H.P. |
---|---|---|---|---|---|
5 | 235x235 | 115 | 210 | 100 | 2 |
15 | 300x300 | 150 | 225 | 150 | 3 |
25 | 375x375 | 200 | 300 | 175 | 3 |
40 | 450x450 | 250 | 350 | 175 | 3 |
60 | 525x525 | 300 | 400 | 200 | 5 |
75 | 600x600 | 325 | 450 | 200 | 5 |
100 | 675x675 | 350 | 500 | 200 | 5 |
150 | 750x750 | 375 | 550 | 225 | 7.5 |
200 | 750x800 | 400 | 600 | 225 | 10 |
The Presses have good rigid structure for accurate works
POWER PACK UNIT:Our Presses are powered by specially designed Power Pack Unit having Oil Breather (Hydroline), Oil Level Indicator (Hydroline), Suction Strainer (Hydroline), Gear Pump (Bosch Rexroth), Flexible Coupling (Jeck Tech), Electric Motor (Crompton / Siemens), Hand Lever operated Direction Control Valve (Bosch Rexroth), Pressure Gauge (Air Master), Return Line Filter (Hydroline), Oil Tank (without oil), Internal & External Pipe Line etc.
HYDRAULIC CYLINDER:Our Presses are powered by specially designed Double Acting Hydraulic Cylinders. Cylinders manufactured out of quality steel. Cylinder Bores will be honed to mirror finish or long life of piston seals. All chevron seals & bronze strip used for leak proof performance Ram will be made from EN-8 material & surface ground hardened for long life of seals & corrosion resistance.
|
CENTRELESS GRINDER
Description | SSLG-75 | SSLG-100 |
---|---|---|
Grinding range diameter (mm) | 2-75 | 2-100 |
Grinding wheel size (OD x W x I.D. ) (mm) | 350 x 100 x 127 | 350 x 150 x 127 |
Regulating wheel size (OD x W x I.D. ) (mm) | 225 x 100 x 76.2 | 225 x 100 x 76.2 |
Maximum Length in feed grinding (mm) | 100 | 150 |
Maximum Length | 300 x 75 | 250 x 100 |
Grinding wheel speed (R.P.M.) | 1800 | 1800 |
Regulating wheel speed (RPM) | 20-40-60 | 20-40-60 |
Grinding wheel Motor | 5 HP | 7.5 HP |
Regulating wheel Motor | 1 HP | 1 HP |
Coolant pump Motor | 0.15 HP (3 Phase) | 0.15 HP (3 Phase) |
Hydraulic power pack | 0.5 HP | 0.5 HP |
(For dressing unit) | (3 Phase) | (3 Phase) |
Regulating wheel Angle tilting | 5 degree | 5 degree |
Upper Slide swiveling | 3 degree | 3 degree |
Weight (Approx) | 1800 (kg.) | 2000 (kg.) |
Machine Dime(L x B x H) (mm) | 1850 x 1100 x 1600 | 1850 x 1100 x 1600 |