Ahmedabad, Gujarat, India
Verified
Add Review
Our Products
Specifications
| Modal No. | Cap in M.s LengthxThick mmxmm | SPM | Table width mm |
H.P. Regd. 1440 RPM |
|---|---|---|---|---|
| SPS - 2L | 650 X 1 | 50 | 300 | 1 |
| SPS - 3L | 1000 X 1 | 50 | 300 | 1 |
| SPS - 4L | 1250 X 1 | 50 | 300 | 1.5 |
| SPS - 5L | 1525 X 1 | 50 | 350 | 1.5 |
| SPS - 6L | 2000 X 1 | 50 | 350 | 2 |
| SPS - 8L | 2500 X 1 | 50 | 350 | 2 |
| SPS - 2M | 650 X 2 | 50 | 300 | 1.5 |
| SPS - 3M | 1000 X 2 | 50 | 300 | 1.5 |
| SPS - 4M | 1250 X 2 | 50 | 300 | 2 |
| SPS - 5M | 1525 X 2 | 50 | 350 | 2 |
| SPS - 6M | 2000 X 2 | 50 | 350 | 3 |
| SPS - 8M | 2500 X 2 | 50 | 350 | 3 |
| SPS - 2H | 650 X 3 | 50 | 350 | 3 |
| SPS - 3H | 1000 X 3 | 50 | 350 | 3 |
| SPS - 4H | 1250 X 3 | 50 | 350 | 5 |
| SPS - 5H | 1525 X 3 | 50 | 450 | 5 |
| SPS - 6H | 2000 X 3 | 50 | 450 | 7.5 |
| SPS - 8H | 2500 X 3 | 50 | 450 | 7.5 |
| SPS - 2EH | 650 X 4 | 50 | 350 | 5 |
| SPS - 3EH | 1000 X 4 | 50 | 350 | 5 |
| SPS - 4EH | 1250 X 4 | 50 | 350 | 7.5 |
| SPS - 5EH | 1525 X 4 | 50 | 450 | 7.5 |
| SPS - 6EH | 2000 X 4 | 50 | 450 | 10 |
| SPS - 8EH | 2500 X 4 | 50 | 450 | 10 |
"SANDEEP" hand or motorized circle cutting machines suitable to cut circles, rings and disc from mild steel sheets also suitable for strip cutting. Hand operated machines are bench type while motorized machines are supplied with suitable stand, motor attachment, reduction gears and guard.
| Model | No. |
NM-6 |
NM-8 |
| Max. Thick Cap | mm | 1.6 | 1.2 |
| Max. 90' notch in one operation |
mm | 150 x 150 | 200 x 200 |
| Rated Cap | Ton | 4 | 5 |
| Stroke of Ram | mm | 15 | 15 |
| Size of Table | mm | 360 x 460 | 360 x 460 |
STEEL BODY HEAVY DUTY POWER PRESS
Deep throat hand or motorised swaging machine is useful for swaging medium size of drums and all size of common household water buckets. Available in hand or geared motorised. complete with a set of swaging roll, depth guage, star wheel handle for hand and motor mount, motor pulley and pulley cover for motorised model (DSM-16 & DSM-18)
| Deep Throught Swanging Machine | |||||||||
| Model | No. | USM-4 ½ | USM-9 7/8 | DSM-16 | DSM-18 | ||||
| Drive | Hand | Motorised | Hand | Motorised | Hand | Motorised | Hand | Motorised | |
| Working centre of roll |
mm inch |
50 2 |
50 2 |
55 2 3/16 |
55 2 3/16 |
76 3 |
76 3 |
76 3 |
76 3 |
| Max. thick cap.in M.S. |
mm SWG |
0.7 22 |
0.9 20 |
0,9 20 |
1.2 18 |
1.2 18 |
1.6 16 |
1.2 18 |
1.6 16 |
| Max. depth . of gap |
mm inch |
115 4 ½ |
115 4 ½ |
250 10 |
250 10 |
400 16 |
400 16 |
450 18 |
450 18 |
| Power Req. | H.P. | - | 1 | - | 1 | - | 2 | - | 2 |
