Our Products
Our Complete range of products are Signatone Probe Station, Arbitrary Function Generator, Digital Storage Oscilloscope, PCB Prototype Machine and Soldering Station.
| Metric | Imperial | |
| Spindle Speed (Max.) | 13,000 RPM | |
| Power | 12V, 25W | |
| Runout (TIR) | 0.076mm | 0.003inch |
| Shank Diameter | 3.175mm | 1/8inch |
| Supplied Substrate Material | FR1 | |
| Bit Diameter (Max.) | 2mm | 0.078inch |
| Bit Length (Max.) | 38.1mm | 1.5inch |
Soldering
| Metric | Imperial | |
| Minimum Passive Size | 1005 | 0402 |
| Minimum Pin-to-Pin Pitch | 0.5mm | 20mil |
| Solder Paste Alloy | Sn42/Bi57.6/Ag0.4 | Sn42/Bi57.6/Ag0.4 |
| Solder Wire Alloy | SnBiAg1 | SnBiAg1 |
| Soldering Iron Temperature | 180-200°C | 355-390°F |
Solder Compatibility
| Sn42/Bi57.6/Ag0.4 Solder | Sn63/Pb37 Solder | |
| Standard Ink | ??? | ??? |
| Flexible Ink | ??? | ??? |
| Copper PCBs | ??? | ??? |
| HASL PCBs | ??? | ??? |
Footprint and Print Bed
| Metric | Imperial | |
| Dimensions (L × W × H) | 390mm × 257mm × 207mm | 15.4×10.1× 8.2inch |
| Weight | 7kg | 15.4lbs |
| Print Area | 128mm × 116mm | 5×4.5inch |
| Max. Heated Bed Temperature | 240°C | 464°F |
| Metric | Imperial | |
| Minimum Trace Width | 0.2mm | 8mil |
| Minimum Passive Size | 1005 | 0402 |
| Minimum Pin-to-Pin Pitch | 0.65mm | 26mil |
| Resistivity | 12mΩ/Sq @ 70um Height | 12mΩ/Sq @ 3mil Height |
| Supplied Substrate Material | FR4 | |
| Maximum Board Thickness | 3mm | 0.125inch |
| Impedance Z | 1 mΩ to 1 TΩ, 0.05% |
| Admittance Y | 1 pS to 1 kS, 0.05% |
| Voltage V | 0 V to 3 V, 1% |
| Current I | 0 mA to 10 mA, 2% |
| Phases ΘZ, ΘY, ΘV, ΘI | ±180 deg, 10 µdeg res. |
| Resistance RS, RP1 | 1 mΩ to 1 TΩ, max(10 µOhm, 0.05%) |
| Capacitance CS, CP1 | 10 fF to 1 F, max(10 fF, 0.05%) |
| Inductance LS, LP1 | 100 nH to 1 H, max(10 nH, 0.05%) |
| DC Resistance RDC | 1 mΩ to 10 GΩ, 2% |
| Reactance X | 1 mΩ to 1 TΩ, 0.05% |
| Conductance G, Susceptance B | 1 nS to 1 kS, max(100 nS, 0.05%) |
| Loss coefficient D | 10-4 to 10'000 |
| Q factor | 10-4 to 10'000 |
LabOne Sweeper
| Sweep parameters | Frequency, test signal amplitude, bias voltage, etc. |
| Sweep points | 2 to 100'000 |
| Sweep resolution | Arbitrary, defined by start value, stop value, number of sweep points |
| Display parameters | ZX, ZY, Z, ZΘ, VX, VY, VR, VΘ, IX, IY, IR, IΘ, model parameter 1/2, frequency, auxiliary input |
| Display options | Single plot, dual plot (e.g., Bode plot), multi-trace |
| Application modes | Impedance, frequency response analyzer, 3-omega, etc. |
| Sweep modes | Sequential, binary, bidirectional, reverse |
| Sweep step modes | Linear, logarithmic |
| Sweep speed | 20 ms/pt for f > 10 kHz |
Additional tools and features
| LabOne toolset | Numerical, FFT Spectrum Analyzer, Plotter, SW Trigger, Scope |
| APIs | C, .NET, MATLAB, LabVIEW, Python |
| Modes | 2-terminal, 4-terminal |
| Confidence Indicator | Suppression, compensation, overflow, underflow |
| Input range control | Auto, impedance, manual |
| Test signal amplitude | Auto, manual |
| Bandwidth control | Auto, manual |
| Replacement circuit models | Rp||Cp, Rs+Cs, Rs+Ls, G-B, D-Cs, Q-Cs, D-Ls, Q-Ls |
| DCR measurements | Yes |
| Test fixture compatibility | Yes |
Mumbai, Maharashtra 