Our Products
Our Complete range of products are Signatone Probe Station, Arbitrary Function Generator, Digital Storage Oscilloscope, PCB Prototype Machine and Soldering Station.
Metric | Imperial | |
Spindle Speed (Max.) | 13,000 RPM | |
Power | 12V, 25W | |
Runout (TIR) | 0.076mm | 0.003inch |
Shank Diameter | 3.175mm | 1/8inch |
Supplied Substrate Material | FR1 | |
Bit Diameter (Max.) | 2mm | 0.078inch |
Bit Length (Max.) | 38.1mm | 1.5inch |
Soldering
Metric | Imperial | |
Minimum Passive Size | 1005 | 0402 |
Minimum Pin-to-Pin Pitch | 0.5mm | 20mil |
Solder Paste Alloy | Sn42/Bi57.6/Ag0.4 | Sn42/Bi57.6/Ag0.4 |
Solder Wire Alloy | SnBiAg1 | SnBiAg1 |
Soldering Iron Temperature | 180-200°C | 355-390°F |
Solder Compatibility
Sn42/Bi57.6/Ag0.4 Solder | Sn63/Pb37 Solder | |
Standard Ink | ??? | ??? |
Flexible Ink | ??? | ??? |
Copper PCBs | ??? | ??? |
HASL PCBs | ??? | ??? |
Footprint and Print Bed
Metric | Imperial | |
Dimensions (L × W × H) | 390mm × 257mm × 207mm | 15.4×10.1× 8.2inch |
Weight | 7kg | 15.4lbs |
Print Area | 128mm × 116mm | 5×4.5inch |
Max. Heated Bed Temperature | 240°C | 464°F |
Metric | Imperial | |
Minimum Trace Width | 0.2mm | 8mil |
Minimum Passive Size | 1005 | 0402 |
Minimum Pin-to-Pin Pitch | 0.65mm | 26mil |
Resistivity | 12mΩ/Sq @ 70um Height | 12mΩ/Sq @ 3mil Height |
Supplied Substrate Material | FR4 | |
Maximum Board Thickness | 3mm | 0.125inch |
Impedance Z | 1 mΩ to 1 TΩ, 0.05% |
Admittance Y | 1 pS to 1 kS, 0.05% |
Voltage V | 0 V to 3 V, 1% |
Current I | 0 mA to 10 mA, 2% |
Phases ΘZ, ΘY, ΘV, ΘI | ±180 deg, 10 µdeg res. |
Resistance RS, RP1 | 1 mΩ to 1 TΩ, max(10 µOhm, 0.05%) |
Capacitance CS, CP1 | 10 fF to 1 F, max(10 fF, 0.05%) |
Inductance LS, LP1 | 100 nH to 1 H, max(10 nH, 0.05%) |
DC Resistance RDC | 1 mΩ to 10 GΩ, 2% |
Reactance X | 1 mΩ to 1 TΩ, 0.05% |
Conductance G, Susceptance B | 1 nS to 1 kS, max(100 nS, 0.05%) |
Loss coefficient D | 10-4 to 10'000 |
Q factor | 10-4 to 10'000 |
LabOne Sweeper
Sweep parameters | Frequency, test signal amplitude, bias voltage, etc. |
Sweep points | 2 to 100'000 |
Sweep resolution | Arbitrary, defined by start value, stop value, number of sweep points |
Display parameters | ZX, ZY, Z, ZΘ, VX, VY, VR, VΘ, IX, IY, IR, IΘ, model parameter 1/2, frequency, auxiliary input |
Display options | Single plot, dual plot (e.g., Bode plot), multi-trace |
Application modes | Impedance, frequency response analyzer, 3-omega, etc. |
Sweep modes | Sequential, binary, bidirectional, reverse |
Sweep step modes | Linear, logarithmic |
Sweep speed | 20 ms/pt for f > 10 kHz |
Additional tools and features
LabOne toolset | Numerical, FFT Spectrum Analyzer, Plotter, SW Trigger, Scope |
APIs | C, .NET, MATLAB, LabVIEW, Python |
Modes | 2-terminal, 4-terminal |
Confidence Indicator | Suppression, compensation, overflow, underflow |
Input range control | Auto, impedance, manual |
Test signal amplitude | Auto, manual |
Bandwidth control | Auto, manual |
Replacement circuit models | Rp||Cp, Rs+Cs, Rs+Ls, G-B, D-Cs, Q-Cs, D-Ls, Q-Ls |
DCR measurements | Yes |
Test fixture compatibility | Yes |