Sams International

Ashok Vihar, Delhi

Input Power 110V or 230V AC/24V DC adaptor
Frequency 1M Hz (5%)
Mode 3 levels(L low // M medium // H high)
Output power 2.5W20% (max.)
Intensity 0.5W/cm2 20% (max.)
Timer 5, 10 or 15 minutes, three timer setting, default levels 5 minutes
Pulse 60Hz continuous or on time 0.5 seconds & off time 0.5 seconds
Pulse ratio L12.5%, M

Growth factor response within cells and tissue as a result of increased ATP and protein synthesis
Improved cell proliferation
Change in cell membrane permeability to calcium up-take
Pain relief as a result of increased endorphin release
Increased serotonin
Suppression of nociceptor action
Strengthening the immune system response via increasing level of lymphocyte activity and though
a newly researched mechanism termed photo modulation of blood
Acupuncture point stimulation
Safety, Economical efficiency, Diode Laser Therapy,

Specifications
Terminal Laser Output: 500mw 10%
Exit Faculae Diameter of Laser Beam: 10
Probe Central Laser output wavelength: (81030)n
Laser Output Power Instability St: < 10
Probe Peripheral Laser wavelength: 650nm30nm

Dimension 125 x 64 x 27 (mm)Weight 116gm (battery included)Channel two independent channelsPower supply 9V battery x 1 pcsOutput 0120mA P to P into 500 loadRate 1100HzFunction mode cycle time on time off time

f3 continue continue 0

f2 4 seconds 2 seconds 2 seconds

f1 8 seconds 4 seconds 4 secondsPulse width 250s (fixed)

1. Dimension: 195 x 190 x 68;36 (mm)
2. Weight: 700gm (battery included)
3. Power supply: 230V AC 50Hz (or 110V AC 60Hz) to DC 9V adaptor or 9V battery 2 pc and DC 3V (CR2025) 1 pc for clock
4. Channel: 4(4CH) independent isolated transformers6(6CH) independent isolated transforme

8(8CH) independent isolated transformers

5. Output current: 0120mA P to P into 500 load
6. Timer: 0199 min auto off and continuous
7. Function mode: A1A9J1J9 total 90 program modes ; Combination forms: 20790 different forms
8. Program choice: P0P9 ; U0U9 ; L0L9 ; o0o9, total 40 programs
9. Edit for Program: pushing Edit switch and edit inner program
10. LCD display: calendar/timer count down/program mode/on time/ off time/rate/scan type/scan level/intensity level

Dimension 95 x 70 x 32 (mm)
Weight 180gm (battery included)
Channel two independent channels
Power supply 9V battery x 1 pcs or 100V230V/AV/9V DC adaptor
Input current 1000mA DC 9V maximum
Output current 0100mA Peak to Peak into 500ohm load
Current type medium frequency carrier 1KHz-5KHz, adjustable
Burst frequency 0.5Hz150Hz, adjustable
Burst width 3mS 12mS
Pulse width 0.2mS1mS
Timer 15, 30 minutes auto off and continuous
Mode selector MA, MT, MM, B, C, M

Dimension 225 x 205 x 65;41 (mm)Weight 860gm (battery included)Power supply 1.5V battery(SUM-2)x6 pcs or adaptor230V 50Hz (110Va x 60Hz) to DC 9VChannel 4(4CH) independent isolated transforme6(6CH) independent isolated trans8(8CH) independent isolated transformers

Input current 400mA(4CH); 500mA(6CH); 600mA(8CH);DC 9V maximumOutput current 0120mA P to P into 500Timer 15, 30 minutes auto off and continuousFunction mode Selected by push switch FUNCTION, P1, P2, P3, P4 four functions.P1 Four modes rate;R12Hz, R25Hz, R310Hz, R420Hz, per mode 1 minute, each cycle 4 minutes.P2 Three modes rate;R110Hz, R220Hz, R350Hz, per mode 1 minute, each cycle 3 minutes.P3 Three modes rate;R150Hz, R262Hz, R383Hz, per mode 1 minute, each cycle 3minutes, auto amplitude modulation.P4 Three modes rateR1100Hz, R2125Hz, R3150Hz,

per mode 1 minute, each cycle 3minutes, auto amplitude modulation.