Samruddhi Industries

Memco, Ahmedabad, Gujarat

Features

• 128*128 dot matrix LCD display, standard menu operations;
• Two measure mode single and continuous;
• Two group mode direct (DIR) and general(GEN), readings will be lost when power off in direct mode, and not be lost in
• general mode. 80 readings can be stored for each group;
• Zero point calibration and multi-point calibration(up to 4 points) for each group;
• User can recall, delete specified readings, or delete group readings;
• Statistics display mean, minimum, maximum and standard deviation;
• Three probe mode auto, magnetic and eddy current;
• User can set high or low limit alarm for each group;
• Power off automatically;
• USB interface to data transmission;
• Low battery and error indication;
• Measuring principle Magnetic induction (F-probe) and eddy current (N-probe);
• Measuring range 0 to 1300um (0 to 51.2mils);
• Accuracy +- (3% of readings 2um);
• +- (3% of readings 0.078mils);
• Resolution 0um999um (1um), 1000um1300um (0.01mm);
• 0mils39.39mils (0.01mils), 39.4mils51.2mils (0.1mils);
• Calibration One to four point calibration, zero calibration;
• Data Group One direct group (readings not be stored to memory), four general group (readings can be stored), and each
• group have individual statistics, alarm settings and calibration;
• Statistics No. of readings, mean, minimum, maximum and standard deviation;
• Units um, mm and mils;
• Alarm User can set the high/low alarm, and alarm icon displayed on LCD when over the limit;
• Minimum curvature radius convex 1.5mm(59mils) and concave 25mm(984mils);
• Minimum measuring size Diameter 6mm(236mils);
• Minimum thickness of substrate F-probe 0.5mm(0.02"), N-probe 0.3mm(0.012");
• Computer interface Download data via USB interface;
• Power supply Two 1.5v AAA battery;
• Operation temperature 0 to 40(32 to 104);
• Storage temperature -20 to 70(-4 to 158);
• Size 110mm*53mm*24mm (4.33"*2.09"*0.94");
•  Weight 92g (3.24oz);

• Display 4-digital lcd display
• Minimum display unit 0. 1mm
• Working frequency 5 mhz
• Measuring range 1. 2 to 225. 0mm(steel)
• Minimum limit for tube measuring 20 * 3mm(steel)
• Accuracy +- (1% h 0. 1) mm, h denotes the measured thickness.
• Sound velocity range 1000 to 9999 m/s.
• Measuring sound velocity with a given thickness
• Measuring range 1000 to 9999 m/s.
• when the given thickness over 20mm, the accuracyis +- 1% , when the given thickness less than 20 mm, the accuracy is +-5%
• Operation temperature 0c to 40 c
• Power supply 3 * 1. 5v aaa alkaline batteries
• Operation current normal operation current
• 50ma with backlight turn on current 120 ma stand by current 20 ua

• Two-point calibration function
• Two work modes Single point mode and scan mode
• Coupling status indicator showing the coupling status
• Auto sleep and auto power off function to conserve battery life
• Memory for 20 files (up to 99 values for each file) of stored values

• Hi Lo Welding Gauge MEASURES INTERNAL ALIGNMENT of pipe after fit-up / alignment, cuts radiographic rejects.
• Hi Lo Welding Gauge measures internal misalignment of pipe before and after tacking.
• Hi Lo Gauge Measurements read in standard one side, and metric on the opposite side.

Outside Snap Gauge

• Available in different throat depths, suitable for different measurement requirements.
• In series J130, J138/L, and J142, measurement pressure is independent of the user, resulting in accurate readings of thickness without personal bias.
• J138. Push Down Type thickness gauge is particularly useful where fine measurement is not required for example plywood. Pushing down the plunger with the index finger closes the measuring contacts.
• Well-balanced frames and handgrips coupled with lightweight make these gauges easy to use for the measurement.
• Available in different readings and travels.
• Supplied with 10 mm anvil as standard. 20 mm and larger available on request.
• For the American market, thickness gauges meeting the requirements of AGD standard available

Features:

Brief Introduction:TC300 is used for measuring the thickness of nonmetallic plate indirectly, especially for concrete slab. This gauge is to measure the concrete slab thickness mainly by using distribution characteristics of electromagnetic field and possesses functions of thickness measurement, data analysis, data storage & output etc. It is a kind of intelligent thickness measuring instrument that is portable, convenient and accurate.

• Measuring the thickness of concrete, rock glass and other nonmetallic plate
• Sound alarm , signal strength bar are used to improve measuring accuracy
• Direct digital read out of the thickness value avoid the inaccuracy of manual comparison
• Real time analysis of the tested data
• RS232 and USB interface to PC
• Test data create and data logging
• Memory: 32000 test data and 4000 component

We are engaged in manufacturing and exporting a comprehensive range of universal welding gauge that is available with the item code:UWG. These weld gauges are equivalent to English and Japanese universal welding gauge, which is a multi-purpose weld gauge deliberated for general dimensional inspection of welded fabrications. In these, close tolerances are not needed. Offered with co-planer marks on segment and scales, these gauges have the provision of knife-edges against scales eliminate parallax in readings. The new adjustable scale strip allows calibration to account for wear of the pointer. All scales are easier to read and on some the range has been increased. To manufacture these gauges, we make use of high grade stainless steel that is virtually indestructible and is supplied in a plastic packet case.

These gauges have the ability to measure precisely, misalignment (high-low), depth of undercut; depth of pitting, excess weld metal of capping size is particularly useful to check work to pipeline specification (API).

UNIVERSAL WELD GAUGE, equivalent to English and Japanese universal welding gauges, is a multi-purpose weld gauge intended for general dimensional inspection of welded fabrications, where close toleranes are not expected. It is not used where high accuracy is needed.

Many years of experience have resulted in substantial improvements, co-planer marks on segment and scales and the provision of knife-edges against scales eliminate parallax in readings. The new adjustable scale strip allows calibration to account for wear of the pointer. All scales are easier to read and on some the range has been increased.

The gauge is made from stainless steel, is virtually indestructible and is supplied in a plastic packet case. The ability to measure very quickly, misalignment (High-Low), depth of undercut, depth of pitting (to a reasonable accuracy; where exact measurement of the depth of a pit is required a special pit gauge should be used), excess weld metal of capping size is particularly useful to check work to pipeline specification(API).

We are manufacturing surface roughness gauge. Our range of surface roughness gauge are available with the following specifications and features:

• Pocket-size & economically price
• Large measuring range suitable for most materials
• Measures flat, outer cylinder and sloping surface
• Both Ra and Rz parameters in one instrument
• Features external calibration at keyboard
• Standard conform to ISO and DIN
• Chargeable batteries, work while charging

Other Information

• Delivery Time: READY STOCK

For the American market, Universal Test Set meeting the requirements of AGD standard available.

We deal in dial and digital surface profile gauge least count :-0.001mm ( 1 micron) surface profile gauge use in after sand and shot blasing to check s/c profile in micron we also give 1 year surface profile gauge calibration certificate free.

We are offering Ultrasonic Thickness Gauge

• Robustly constructed, Stainless Steel column with clearly marked scale graduation.
• A clear Multifunction Digital LCD display runs smoothly on the Analog vertical scale.
• Fine adjustment with lock provided for ease of setting.For easy and precise maneuverability the base has a specially designed thumb grip.
• Carbide tipped scriber.
• Functions consist of Power ON/OFF, bsolute/Incremental mode, mm/in., Preset, Hold, and Tolerance setting.
• Capacitive measurement system.
• Maximum reading speed 1m/s.
• Powered by easily replaceable Silver Oxide Battery.
• Operating environment Temperature 5 to 45 degrees C at < or = 80% Humidity.

• Small bores from 10mm to 18mm.
• Highly versatile 18-50mm bore gauge covers a large range for which one needs to generally purchase 2 bore gauges having ranges 18-35mm and 35-60mm.
• The third bore gauge covering a range of 50-150 mm, is widely used in Automobile, Aircraft, Engine and Pump manufacturers.
• High wear resistance due to carbide-tipped stationary and moving anvils
• Extra wide bridge ensures automatic centering in the bore. Self- centralising feature of this bore gauge ensures that the measurement can be done with minimum of skill.
• Furnished in a sleek wooden case containing measurement anvils and extension rods with necessary tools.