The release of potential energy of fuel by combustion with air requires several stages, namely.

1. Mixing of air and fuel
2. Ignition of the mixture
3. Chemical reaction

Disposal of products of combustion from the reaction site so that fresh reactants are available. Except mixing of air and fuel, all other stages are extremely fast such that it is said that if fuel and air are mixed, fuel is burnt. Accordingly mixing is the slowest step in the process of combustion this can be understood by considering that each mole of carbon theoretically requires 1 mole of oxygen for complete combustion. But 1 mole of oxygen is obtained from 4.76 moles of air. That means 3.76 moles of nitrogen are present with 1 mole of oxygen. Nitrogen is inert and does not take part in combustion therefore mixing of air + fuel is important.

Fuel level Indicator, Temperature Indicator, Generator speed and voltage controller, Ash grate Auger Motor Control, 110mm LCD display, Pic Microcontroller for Gasifer and Generator, Pressure Indicator, Auger Feeding System, Sound proof (optional), No water for cleaning and cooling the gas, Tar free, Fuel dryer by CHP, Air pre heating techonlogy.

WORKING OF WASTE OIL STOVE

1. Supplies required amount of fuel and air.
2. Creates condition for rapid mixing of fuel and air.
3. produces a flame which transfers thermal energy to stove and charge In oil stove, oil is atomized into a fine spray by a spray nozzle and air is supplied for combustion in the Spray chamber. Alternatively oil may be atomized by high speed air to produce a fine dispersion of droplets into air.

ADVANTAGE OF OUR WASTE OIL STOVE

1. Low Energy Consumption and Low Noise
2. High Quality Fuel - Air Mix
3. High Flame Stability
4. High Combustion Efficiency
5. Environment-Friendly
6. Full Automatic Control: Safety and Reliability
7. Easy Installation
8. Easy Maintenance

TYPES OF WASTE OIL CAN BE USED IN OUR OIL STOVE

1. Hydraulic oils
2. Transmission oils
3. Gear box oils
4. Fuel oil & all lower viscosities
5. Mineral spirits
6. Machine cutting oils
7. Synthetic oils
8. Commercial jet fuels
9. Military jet fuels
10. Crude oils
11. Vegetable oils
12. Animal fat

Our waste oil stove will produce 20000kcal -90000kcal depends on clients requirements.

ECONOMICS

1. 1kg of waste almost equal to 1kg of LPG
2. Cost of 1kg waste oil is 20-45rs
3. Cost of 1kg LPG is 85-90rs
4. Saving per kg LPG replacement is 50-70%
5. For example if one 19kg LPG cylinder is replacing by our waste oil stove
6. Customer can earn 31000rs per month

The release of potential energy of fuel by combustion with air requires several stages, namely.

1. Mixing of air and fuel
2. Ignition of the mixture
3. Chemical reaction

Disposal of products of combustion from the reaction site so that fresh reactants are available. Except mixing of air and fuel, all other stages are extremely fast such that it is said that if fuel and air are mixed, fuel is burnt. Accordingly mixing is the slowest step in the process of combustion this can be understood by considering that each mole of carbon theoretically requires 1 mole of oxygen for complete combustion. But 1 mole of oxygen is obtained from 4.76 moles of air. That means 3.76 moles of nitrogen are present with 1 mole of oxygen. Nitrogen is inert and does not take part in combustion therefore mixing of air + fuel is important.

Fuel level Indicator, Temperature Indicator, Generator speed and voltage controller, Ash grate Auger Motor Control, 110mm LCD display, Pic Microcontroller for Gasifer and Generator, Pressure Indicator, Auger Feeding System, Sound proof (optional), No water for cleaning and cooling the gas, Tar free, Fuel dryer by CHP, Air pre heating techonlogy.

WORKING OF WASTE OIL STOVE

1. Supplies required amount of fuel and air.
2. Creates condition for rapid mixing of fuel and air.
3. produces a flame which transfers thermal energy to stove and charge In oil stove, oil is atomized into a fine spray by a spray nozzle and air is supplied for combustion in the Spray chamber. Alternatively oil may be atomized by high speed air to produce a fine dispersion of droplets into air.

ADVANTAGE OF OUR WASTE OIL STOVE

1. Low Energy Consumption and Low Noise
2. High Quality Fuel - Air Mix
3. High Flame Stability
4. High Combustion Efficiency
5. Environment-Friendly
6. Full Automatic Control: Safety and Reliability
7. Easy Installation
8. Easy Maintenance

TYPES OF WASTE OIL CAN BE USED IN OUR OIL STOVE

1. Hydraulic oils
2. Transmission oils
3. Gear box oils
4. Fuel oil & all lower viscosities
5. Mineral spirits
6. Machine cutting oils
7. Synthetic oils
8. Commercial jet fuels
9. Military jet fuels
10. Crude oils
11. Vegetable oils
12. Animal fat

Our waste oil stove will produce 20000kcal -90000kcal depends on clients requirements.

ECONOMICS

1. 1kg of waste almost equal to 1kg of LPG
2. Cost of 1kg waste oil is 20-45rs
3. Cost of 1kg LPG is 85-90rs
4. Saving per kg LPG replacement is 50-70%
5. For example if one 19kg LPG cylinder is replacing by our waste oil stove
6. Customer can earn 31000rs per month