Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

SAI WELD INDIA

SAI WELD INDIA
location Borivali East, Mumbai, Maharashtra

gstGST : 27AAWPW8940R1Z3 Verified Write a Review
View Number

Our Products

  1. Welding Rods, Electrodes & Wires 28 Products available
  2. Torchlight 23 Products available
  3. Metal Cutting Machine 21 Products available
  4. Cutting Machine 21 Products available
  5. Electrodes 8 Products available
  6. Cnc And Lathe Machinery 6 Products available
  7. Servo Drives 6 Products available
  8. Steel Plates, Sheets, Bars & Rods 6 Products available
  9. Process Control Systems & Equipment 5 Products available
  10. DC Motor 3 Products available
  11. Others Products 25 Products available

Cutting Machine

We offer the best product range of Hypertherm Powermax 105 Plasma Cutting Machine, Plasma Cutting Machine, Hypertherm Powermax 125 Plasma Cutting Machine, Hypertherm Powermax 85 Plasma Cutting Machine and Hypertherm Powermax 65 Plasma Cutting Machine.

Hypertherm Powermax 105 Plasma Cutting Machine

Hypertherm Powermax 105 Plasma Cutting Machine

Hypertherm Powermax 105 Plasma Cutting and Gouging System come with high speed and accuracy. The can be hand held without any risk of safety hazards. The consumer life for this product is appreciably high and is thus high in demand. Our clients for this product are from different parts of the world. We supply it at affordable rates, usually in bulk and medium sized quantities.

Maximum productivity :

  • Fast cut speeds: three times faster than oxyfuel on 12 mm (") mild steel.
  • Superior cut and gouge quality means less time spent on grinding and edge preparation.


    • Easy-to-use for cutting and gouging :

      • Smart Sense technology automatically sets correct air pressure based on torch length and operating mode.
      • Handheld, straight machine and robotic torches for greater versatility and ease-of-use.
      • Wide voltage tolerance improves performance on motor generators and in low-line conditions.
      • Improved shield reduces dross buildup and enables smoother drag cutting for a better cut.


        • Built and tested to withstand the harshest conditions :

          • Duramax torches are designed for high impact and heat-resistance.
          • SpringStart technology ensures consistent starting and a more reliable torch.
          • Low maintenance for maximum uptime it keeps on going.


            • Low operating cost :

              • Long consumable life for lower cost and more uptime.
              • Exclusive electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.
              • High power efficiency lowers energy consumption.
View Complete Details
Ask Latest Price & Details
plasma cutting machine

Plasma Cutting Machine
The Automated Plasma Cutting or what is more commonly known as A Series Plasma Cutting System is manufactured, supplied and also exported by us in bulk sized quantities. They come with current and pressure control as well. We have been in this field for some time now and have a huge client base to our credit. Kindly get in touch with our sales executives for further details regarding this product. Features :Front Panel ControlsMode selectionCurrent controlPressure controlStatus display LEDsPressureStatus indicatorsPower switch on front With all the advantages of 1Torch and proven Thermal Dynamics reliability, the automated A-Series delivers the best in productivity, precision and performance :A powerful 80% Duty Cycle to handle all-day production cutting in the toughest environments.Light-weight, compact design and convenient mounting feet allow for easy mounting in any application.Valve-in-torch design reduces cycle time between parts and increases productivity.CNC Interface connection is located on the rear of the power supply offering StartStop, ok to Move and divided arc voltage signals.Full arc voltage is available using an internal terminal connection.Software automatically detects the torch that is attached and switches between automation and manual modes.Dedicated automation software improves cycle time and performance in many applications.The A-Series systems include the SL100 SV 1Torch start technology eliminating the electronic interference that can occur with other designs. The 1Torch provides quick, reliable starts and a strong pilot arc to pierce heavy plate. With auto-pilot restart, it can also cut expanded metal quickly and easily.The SL100 SV Torch comes with standard ATC Quick Disconnect in lengths of 25 ft (7.6 m), 35 ft (10.7 m) and 50 ft (15.2 m) Longer torch leads up to 100 ft (30.5 m) available.
View Complete Details
Ask Latest Price & Details
Hypertherm Powermax 125 Plasma Cutting Machine

Hypertherm Powermax 125 Plasma Cutting Machine

For a few number of years now, we have been supplying and exporting the Hypertherm Powermax 125 Plasma Cutting and Gouging System that we manufacture in our very own factories. These systems are highly efficient and are of international standards in terms of quality and safety. These are power efficient as well. Contact us if you would like to place a bulk or medium sized order.

Maximum productivity :

  • Finish jobs faster with cut speeds 5 times greater than oxyfuel on 12 mm mild steel.
  • Spend less time on grinding and edge preparation due to superior cut and gouge quality.
  • Maximize your cutting time with 100% duty cycle.


    • Low operating costs :

      • Reduce costs with consumable life up to four times longer than other systems in this amperage range.
      • Electrode end-of-life detection protects the torch and workpiece from damage by automatically stopping power when the electrode is overused.


        • Easy-to-use for cutting and gouging :

          • No need to change the air pressure. Smart Sense technology ensures that it is always correctly set.
          • Tackle different jobs with multiple, easy-to-use torch styles.


            • Built and tested to withstand the harshest conditions :

              • Duramax Hyamp torches are designed for high-impact and heat resistance.
              • SpringStart technology ensures consistent starting and a more reliable torch.
              • Low maintenance for maximum uptime.
View Complete Details
Ask Latest Price & Details
Hypertherm Powermax 85 Plasma Cutting Machine

Hypertherm Powermax 85 Plasma Cutting Machine

The Hypertherm Powermax 85 Plasma Cutting and Gouging System that we manufacture, supply and export is renowned for the patent pending technology is highly sought after in all the markets today. This system is designed to be highly efficient and user friendly as well. We primarily deal only in bulk and marginal sized quantities as we are wholesale dealers. We ensure that the goods reach our clients by the promised dates without fail.

Key power supply advantages :

  • Smart Sense technology automatically adjusts the gas pressure according to cutting mode and torch lead length for optimal performance.
  • Boost Conditioner circuit (on CSA models) improves performance on low line voltage, motor generators, and fluctuating input power.
  • FastConnect torches, CNC interface, and four work lead styles increase versatility for handheld and mechanized use.
  • Simplified control panel with LCD screen for easy operation.


    • Key torch advantages :

      • 15o and 75o Duramax series hand torches enable operators to easily select the right tool for the job. The handle is more heat resistant and performs at least five times longer in high impact tests than previous torches.
      • Standard and short-barreled Duramax series machine torches allow a wide variety of mechanized applications with X-Y tables, track systems, pipe and robotic cutting systems.
      • Conical Flow nozzle increases arc energy density for superior cut quality with little dross.
      • Patent pending shield reduces dross buildup and enables smoother drag cutting for a better cut.
View Complete Details
Ask Latest Price & Details
Hypertherm Powermax 65 Plasma Cutting Machine

Hypertherm Powermax 65 Plasma Cutting Machine

Equipped with Smart Sense technology and Boost Conditioner circuit, the Hypertherm Powermax 65 Plasma Cutting and Gouging System are one among our most sought after products. The control panel that comes with LCD display ensures easy and hassle free operation. The handle is heat resistant and is designed to be comfortable to hold even for long periods of time. Kindly get in touch with us for all further details regarding this product.

Key power supply advantages :

  • Smart Sense technology automatically adjusts the gas pressure according to cutting mode and torch lead length for optimal performance.
  • Boost Conditioner circuit (on CSA models) improves performance on low line voltage, motor generators, and fluctuating input power.
  • FastConnect torches, CNC interface, and four work lead styles increase versatility for handheld and mechanized use.
  • Simplified control panel with LCD screen for easy operation.


    • Key torch advantages :

      • 15o and 75o Duramax series hand torches enable operators to easily select the right tool for the job. The handle is more heat resistant and performs at least five times longer in high impact tests than previous torches.
      • Standard and short-barreled Duramax series machine torches allow a wide variety of mechanized applications with X-Y tables, track systems, pipe and robotic cutting systems.
      • Conical Flow nozzle increases arc energy density for superior cut quality with little dross.
      • Patent pending shield reduces dross buildup and enables smoother drag cutting for a better cut.
View Complete Details
Ask Latest Price & Details
CNC Plasma Cutter

CNC Plasma Cutter
  • Maximum Cut 12mm
  • Pierce Rating 6mm
CNC plasma cutter is an inverter based system specifically designed to provide excellent cutting and beveling performance on materials up to 10mm thick. The unit is fitted with a state of the art power factor correction (PFC) module that provides maximum cutting capability from a 10 Amp, 240 Volt supply. The system also incorporates features such as auto-pilot re-start, True Guard roll bar and the industry renowned SL60 ITorch for superior durability and consumable life.
View Complete Details
Ask Latest Price & Details
CNC Plasma Cutting Machine

CNC Plasma Cutting Machine
  • Input Volts 380/400V, 3 ph, 50/60 Hz
  • Maximum Edge Start 30mm
CNC plasma cutting machine Weight:28.6kg - Unit, Power Cable, (Torch and Leads) , Control: CNC rear panel connector, StartStop OK to Move, and divided arc voltage.
View Complete Details
Ask Latest Price & Details
Bevel Cutting Machine

Bevel Cutting Machine
  • Width 0. 8m less than
  • Maximum speed 15000mm/min
The ArtHydef Plasma Bevel cutting system is widely applicable in ship-building, structural steel and mechanical device manufacturing industries. The ability to cut parts with accuracy and precision in 2-D, but with the added benefit of 3-D cutting to prepare edge surfaces that are correctly beveled and clean to be immediately ready for subsequent welding operations, without the need for additional weld-prep operations. This benefit delivers substantial improvements in productivity and cost savings! The design of the rotating head does not twist the cables, and reliability is improved by eliminating the need for a rotary contactor ring to transmit electrical signals. This system supports a smooth continuous change to the bevel angle while cutting to realize plate curve bevel cutting, and can also cut V, X, K or Y bevels. Typical applications include cutting ship hull components, or pressure vessels with domed surfaces where beveled sections are cut from the rounded surfaces. The plasma bevel Cutting Machine has the capability to perform scarf function to remove weld beads and leave a seamless appearance to welded seams, eliminating the need for subsequent machining processes. The plasma system is matched to meet the cutting requirements of the customer and application.
View Complete Details
Ask Latest Price & Details
CNC Flame Cutting Machine

CNC Flame Cutting Machine
  • Pipe Diameter Range Φ 60 - Φ 1000mm
  • speed 100-3000mm/min
  • diameter 190 mm or 260 mm
The Art-Pcut CNC Transversal Cutting Machine is the perfect system to prepare steel and non-ferrous metal pipe for fabrication applications. A servo driven rotating chuck provides support for pipe in the 60mm-2000mm diameter range and servo driven profiling axes position and orient torch for precise profiles. Automatic, servo driven height-sensing system vertically compensates position for out of round pipe. An intuitive macro shape library automatically creates the pipe cutting programs, making it easy to cut intersection holes at any bevel angle to support subsequent welding processes. This machine has various uses in construction, chemical & process industries, shipbuilding, mechanical engineering, metallurgy, electric power generation, and steel pipe structural framing applications.
View Complete Details
Ask Latest Price & Details
Strip Cutting Machine

Strip Cutting Machine
  • Width 70mm
  • Maximum Speed 6000mm/min
  • Cutting Thickness 5-60mm
The ArtMax-03 flame cutting machine is a cost effective system for making straight cuts (strip cuts) in steel plates. The overall size and number of torches are configured according to the requirements of the customer's application. Several gas torches mounted on the front of the machine can make longitudinal straight cuts simultaneously, and one torch mounted to the back of the machine can make crosswise cuts to cut off the width edge of the plate. The simple operator console makes it easy to control the cutting process. Optional features such as manual or motorized height adjustment support the ability to raise and lower all torches together for convenient operation. Water spray devices are also optional.
View Complete Details
Ask Latest Price & Details
CNC Gas Cutting Machine

CNC Gas Cutting Machine
  • Cutting Thickness 5 150mm (optional up to 300mm)
  • Load Speed 10000 mm
The ArtCut CNC flameplasma cutting machine is a flexible all-round system that is very cost effective, and by combining oxy-fuel cutting and plasma cutting processes this system provides users with productivity improvements and cost saving benefits.This single machine is suitable for gas cutting of carbon steel in 5-300mm thickness range, and can support plasma cutting for stainless steel, carbon steel and non-ferrous metal in 0.5-160mm thickness range (de sending on capacity of plasma source selected). The rack & pinion drive mechanism employs a reliable brushless AC servo system with precision planetary gearboxes for high positional accuracy, and linear guides for smooth, accurate motion of the torches in the cross axis.
View Complete Details
Ask Latest Price & Details
CNC Plasma Bevel Cutting Machine

CNC Plasma Bevel Cutting Machine
  • Effective Cutting Width 0. 8m less than track width
  • Machine Width Made to customer requirement - 4m minimum
  • Rotation +/- 720 'legrees standard (optional infinite rotation)
  • The Length Of Rail According to customer requirement
  • Effective Cutting Length 2.5m less than track length
  • Plasma Bevel Cutting Thickness Determined according to Plasma System selected
  • Bevel Angle ±45°
  • Maximum speed 15000mm/min
  • Tool Stations • Up to 2 plasma bevel stations • Optional gas cutting torch station (single torch, triple 1orch and rotating triple torch systems offered) • Optional Marking & Drilling systems
  • Cutting Mode Plasma (Standard) - Optional Flame Cutting
  • Servo System Yaskawa Sigma Series - Dual Rail Drive
  • Gearbox NEUGART Planetary Reducer
  • NC system Hypertherm EDGE Pro CNC
  • Nesting software LANTEK
  • Optional features Cutting Table , Fume Extraction System
View Complete Details
Ask Latest Price & Details
ArtMaster CNC Plasma Table Cutting Machine

ArtMaster CNC Plasma Table Cutting Machine
  • Cutting Thickness 50 mm Maximum
  • Type ArtMaster CNC Plasma Table Cutting Machine
  • Machine Width According to customer requirement, 3m max
  • Driving Mode Single Side standard - Dual side optional
  • Length Of Machine According to customer requirement, 8m max
  • Effective Cutting Width 0.5m less than overall width
  • Effective Cutting Length 0.8m less than overall length
  • Maximum speed 12000mm/min
  • Cutting Torch One plasma torch station
  • Cutting Mode Plasma cutting (Air, 0xy, N2, H2, Argon hydrogen mixture)
  • Servo System Yaskana Sigma Series standard - Panasonic optional
  • Gearbox NEUGART Planetary Reducer
  • Guides Precision linear guides in all axes
  • NC systems offered Hypertherm MicroEDGE or EDGE Pro, Burny 10, FL CNC
  • Plasma Systems Offered Kjelloerg, Hypertherm, Thermal Dynamics, Kaliburn
  • Nesting software FASTCAM
  • Cutting Table Built into machine
  • Optional Features Downdraft Table, Fume Extraction System, Water Table
View Complete Details
Ask Latest Price & Details
Portable CNC Plasma Cutting Machine

Portable CNC Plasma Cutting Machine
₹ 10 Lakh - ₹ 20 Lakh /Piece Get Latest Price
  • Effective Cutting Length 500 mm less than track length
  • Type WMT Small CNC Cutting Machine
  • Beam width 1700mm
  • Track Length 2500mm standard, optional longer lengths available
  • Effective Cutting Width 1200mm
  • Cutting Mode Flame standard, Optional: Air Plasma
  • Cutting thickness Flame: 6-10Cnm, Plasma: according to plasma system
  • Flame Cutting gas Oxygen + Acetylene, Oxygen + Propane
  • NC System Start Microstep CNC
  • Maximum speed 6000mm/min
  • Power Standard 220v 50HZ / Optional: 110 VAC 60 Hz
View Complete Details
Ask Latest Price & Details
Art Cut Pipe CNC Flame/Plasma Cutting Machine

Art Cut Pipe CNC Flame/Plasma Cutting Machine
  • Torch from side to side ±60°
  • Torch back and forth ±50°
  • Cutting nozzle expansion 50mm
  • Minimum crossing angle 20
  • Chuck clamping jaws 3-4
  • Chuck hole diameter 190 mm or 260 mm
  • Electric chuck Optional
  • Pipe Support Brackets 4 Sets (or as per request of Customer)
  • Acceptable ambient temperature -5°C— 50°C
  • Cutting mode Oxygen + Acetylene, Oxygen + Propane, or Plasma
  • Power supply voltage 380V 50HZ

Type Parameter
ArtPcut Pipeline Transversal CNC Flame/Plasma Cutting Machine
Pipe Diameter Range Φ 60 - Φ 1000mm Φ 1000 - Φ 2000mm
Maximum weight of pipe 20000KG 45000KG
Flame cutting torch 1 set
Plasma Torch Optional
Cutting the workpiece material Carbon steel, Stainless stee, Alloy steel, nonferrous metals etc.
Vertical speed 10000mm/min
Cutting speed 100-3000mm/min
Flame cutting thickness 5-60mm
CNC axes 2-6 (according to customer requirement)
Pipe rotation axis Unlimited rotation
Elliptical Compensation, Dynamic Torch Height Control Real-time measurenent of pipe roundness, dynamic elliptical compensation ensuies consistent height between cutting nozzle, and the pipe surface, preventing collision of the pipe surface with torch tip
Cutting torch up and down movements 150-550mm 550-1100mm
View Complete Details
Ask Latest Price & Details
CNC Profile Cutting Machine

CNC Profile Cutting Machine
CNC profile cutting machine The machine is I eat-treated and stress relieved to provide good rigidity and high strength with no deformation. Heavy duty rail is machinec and surface treated for long life and smooth motion.
View Complete Details
Ask Latest Price & Details
PAK 200i Plasma Cutting Machine

PAK 200i Plasma Cutting Machine
Plasma Arc Gouging (PAG) Performance Torch & Leads Packages Plasma Arc Gouging is fast, economical and an environmentally friendly method for removing metal. When compared with Conventional Air Carbon Arc gouging (CAC-A), Plasma Arc Gouging offers: Simple Operation Easy Acceptance from Operators Clear Visibility of Gouging Area High Material Removal Rates Reduced Smoke in Workplace Reduced Noise for Operator and Other Personnel in Surrounding Area Cutting Capability of up to 2 3/4" (70 mm) with a Consumable Parts change
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us