Our Products
Iron Products
2 Products availableOur product range contains a wide range of vizag tmt bars, TMT Bars, radha tmt bars, vijay tmt bars and TMT Bar
We are among the most trusted Suppliers of Vizag TMT Bars. The Vizag TMT Bars offered by us are made using superior quality raw materials. Vizag TMT Bars are widely demanded in the market and is highly appreciated for features like duct ability, corrosion resistant, tear and wear resistant. Specifications
Special Features
Packaging
Invoicing
Quality & Shipment
Produced From Fully Killed Steel
Size (mm) | Sectional Wt. (Range) Kg/m |
---|---|
8 | 0.363 to 0.426 |
10 | 0.526 to 0.666 |
12 | 0.835 to 0.941 |
16 | 1.501 to 1.659 |
18 | 1.940 to 2.060 |
20 | 2.396 to 2.544 |
22 | 2.891 to 3.069 |
25 | 3.375 to 3.966 |
28 | 4.685 to 4.975 |
32 | 6.121 to 6.499 |
36 | 7.750 to 8.230 |
Standard | Grade | Remarks | Yield Strength (M/mm2) min | UTS (N/ mm2)Min | % Elogation min |
---|---|---|---|---|---|
IS : 1786-1985 | Fe 415 | -- | 415 | 485 | 14.5 |
IS : 1786-1985 | Fe 500 | -- | 500 | 545 | 12 |
IS : 1786-1985 | Fe 550 | -- | 550 | 585 | 8 |
Re-bars with | CRM | Cu+Cr+P = 0.75 % min | 415 | 485 | 14.5 |
Corrosion | HSCRM | Cu+Cr+P = 0.75% min | 500 | 545 | 12 |
Resistance | -- | -- | -- | -- | -- |
Elements | -- | -- | -- | -- | -- |
Produced From Fully Killed Steel
Size (mm) | Sectional Wt. (Range) Kg/m |
---|---|
8 | 0.363 to 0.426 |
10 | 0.526 to 0.666 |
12 | 0.835 to 0.941 |
16 | 1.501 to 1.659 |
18 | 1.940 to 2.060 |
20 | 2.396 to 2.544 |
22 | 2.891 to 3.069 |
25 | 3.375 to 3.966 |
28 | 4.685 to 4.975 |
32 | 6.121 to 6.499 |
36 | 7.750 to 8.230 |
Standard | Grade | Remarks | Yield Strength (M/mm2) min | UTS (N/ mm2)Min | % Elogation min |
---|---|---|---|---|---|
IS : 1786-1985 | Fe 415 | -- | 415 | 485 | 14.5 |
IS : 1786-1985 | Fe 500 | -- | 500 | 545 | 12 |
IS : 1786-1985 | Fe 550 | -- | 550 | 585 | 8 |
Re-bars with | CRM | Cu+Cr+P = 0.75 % min | 415 | 485 | 14.5 |
Corrosion | HSCRM | Cu+Cr+P = 0.75% min | 500 | 545 | 12 |
Resistance | -- | -- | -- | -- | -- |
Elements | -- | -- | -- | -- | -- |
Note : Sizes 8,10 and 12 m are not regulary rolled in fe 550 Grades |
It is a matter of great pride and achievement that our quality adherence has catapulted Radha Smelters Ltd. to being the leading manufacturer of TMT Bars, MS Squares, Design Squares, MS Flats, Design Flats, and MS Rounds. The Radha TMT Bars offered by us, are known for high strength and durability. With professional experience and expertise that has been enhanced by catering to a variety of customer requirements, Radha Smelters Ltd. is today synonymous with quality, adherence to global standards of excellence and durability that stands the test of time. TMT winsOur customers choose steel manufactured with Thermex TMT above any alternative, for a variety of reasons.
Available In
Vijay TMT steel bars, a prestigious product of Kamakshi Steels Pvt. Ltd. that enjoys two-decade-old reputation. Earlier, known as SDV Steels, it made a mark in the making of quality reinforced steel bars using new-age technology in Andhra Pradesh. Vijay TMT is proud of being an ISO 9001: 2000 certified company offering quality products. Vijay TMT in tune with the changing new technology manufactures TMT steel bars that carry the following unique features :
Vijay TMT bars contain lower corbon levels as these are made in Fe 415 [in future Fe 500. Fe 550], IS : 1786 grade. This Chemical composition leads to superb ductability, extreme bendability and excellent weldability. The product is the next generation high-yielding strength and ductile steel bar. It gives consistent quality on par with global standards. The grade 500 gives 18% to 25% elongation. The users get 10% to 15% savings in steel used in RCC structures. They can also find very negligible loss of strength at as high temperature as at 500o C. The ApplicationsVijay TMT steel bars have become synonymous for strength and durability and are used in the constructions of all types of concrete structures including sky scrapers, everywhere. The ProcessItâs the best process for making supreme quality steel bars. Steel billets are heated and rolled through a sequence, the parcel leaving the final stage for a special three - stage heat treatment. The phases of production process
Chemical ArrangementVijay TMT bars contain lower carbon levels as these are made in Fe 415 [in future Fe 500, Fe 550], IS : 1786 grade. This Chemical composition leads superb ductability, extreme bendability and excellent weldability. ScopeAs per Indian standard the strength grades Fe415, Fe 500 and Fe 550 are covered by the requirements of Vijay TMT bars, for using these as reinforcement concrete. ElongationWhen a tensile test bar is subjected to under constant stress, increase in length is arrived at, resulting in elongation. Tensile StrengthUltimate tensile stress is, when maximum load reached in a tensile test divided by productive and effective cross - sectional area of the gauge length portion of the test bar. This process involved is known as tensile strength. Specified LengthsVijay TMT bar can be cut within certain deviations of + 75mm on the length specified is the -25 cases minimum lengths, the deviations should not exceed +50mm and -0 mm. Nominal MassThe density of Vijay TMT at 0.00785 kg/mm2 of the cross-sectional area/m run should be applied, while checking the nominal mass. Customer FriendlyVijay TMT is the next generation high-yielding strength and ductile steel bar. It gives consistent quality on par with global standards. The grade 500 gives 18% to 25% elongation. The users get 10% to 15% savings in steel used in RCC structures. They can also find very negligible loss of strength at as high temperature as at 500C.
Chemical Properties
Parameters | Unit | IS : 1766 | Vijay TMT Bar |
Carbon | % | 0.30**max | 0.17-0.24 |
Carbon Equivalalent | |||
(C+Mn/6) | % | - | 0.38 max |
Sulphur | % | 0.060 max | 0.045 max |
Phosphorous | % | 0.60 max | 0.045 max |
S & P | % | 0.110 max | 0.090 max |
Nitrogen | ppm | - | 100 max |
Mechanical Properties
Parameters | Unit | IS : 1786 Gr.-Fe 415 | Vijay Gr. - Fe 415 |
Yield Strees | N/mm2 | 415 min | 450 min |
Tensile Strees | N/mm2 | 10% more than ys but not less than 485 | 10% more than ys but not less than 520 |
Elongation | % | 14.5 min | 22 min |
Characteristics Properties
Parameters | CTD 415 | Vijay TMT 415 |
---|---|---|
Deesign | 415 | 450N/mm2 |
Quantity | 1.0 Mt. | .92 Mt. |
Required % of saving weight over CTD 415 | 8.0 | |
Saving in cost relative to CTD 415/Mt. | Rs. 2104 |
Specifications
Specific | BIS %Range/ Tolerance | Vijay TMT Range/Tolerance | ||
---|---|---|---|---|
Size in mm | Kg/mtr. | Kg/mtr. (Min) (Max) |
Kg/mtr. (Min) (Max) |
% |
8 | 0.395 | 0.367 to 0.423 | 0.370 to 0.407 | ±7 |
10 | 0.617 | 0.574 to 0.659 | 0.580 to 0.625 | ±7 |
12 | 0.888 | 0.844 to 0.932 | 0.845 to 0.920 | ±5 |
16 | 1.579 | 1.500 to 1.658 | 1.516 to 1.625 | ±5 |
20 | 2.467 | 2.400 to 2.541 | 2.408 to 2.510 | ±3 |
25 | 3.856 | 3.740 to 3.971 | 3.752 to 3.924 | ±3 |
32 | 6.313 | 6.124 to 6.502 | 6.200 to 6.450 | ±3 |
Characteristics Properties
Parameters | CTD 415 | Vijay TMT 415 |
---|---|---|
Deesign | 415 | 450N/mm2 |
Quantity | 1.0 Mt. | .92 Mt. |
Required % of saving weight over CTD 415 | 8.0 | |
Saving in cost relative to CTD 415/Mt. | Rs. 2104 |
Specifications
Specific | BIS %Range/ Tolerance | Vijay TMT Range/Tolerance | ||
---|---|---|---|---|
Size in mm | Kg/mtr. | Kg/mtr. (Min) (Max) | Kg/mtr. (Min) (Max) | % |
8 | 0.395 | 0.367 to 0.423 | 0.370 to 0.407 | ±7 |
10 | 0.617 | 0.574 to 0.659 | 0.580 to 0.625 | ±7 |
12 | 0.888 | 0.844 to 0.932 | 0.845 to 0.920 | ±5 |
16 | 1.579 | 1.500 to 1.658 | 1.516 to 1.625 | ±5 |
20 | 2.467 | 2.400 to 2.541 | 2.408 to 2.510 | ±3 |
25 | 3.856 | 3.740 to 3.971 | 3.752 to 3.924 | ±3 |
32 | 6.313 | 6.124 to 6.502 | 6.200 to 6.450 | ±3 |