Mumbai, Maharashtra, India
GST : 27AAFCS2340R1ZX
Verified
Add Review
Our Products
Specification
| S.No | Parameters | Specifications | Analysis |
|---|---|---|---|
| 1 | Appearance | Water White Liquid | Water White Liquid |
| 2 | Clarity | Clear | Clear |
| 3 | Specific Gravity At 30 Degree | 0.8710.0.88 | 0.873 |
| 4 | Distillation Range | 123-129 Deg.c. | 123-128 Deg.c. |
| 5 | Water Content By Karl Fischer | 0.10% Max | 0.00069 |
| 6 | Assay By G.c. | Min.99.0% | 0.9982 |
| 7 | Acidity as Acetic Acid | 0.01% Max | 0.00006 |
| 8 | Residue On Evaporation | On 0.005 Max.(wt %) | 0.003 |
Specification
| Property | Method | Result Units | Min. | Max. |
|---|---|---|---|---|
| Appearance | Visual | Clear & Bright | - | - |
| Platinum Cobalt Color | ASTM D1209-05(2011) | 5 PI Co. Color | - | 10 |
| Water Content by Coulometric KF | ASTM E1064-16 | 0.023% (m/m) | - | 0.05 |
| Acidity(As Acetic Acid) | ASTM D1613-17 | 0.0027% (m/m) | - | 0.01 |
| MEHQ Content | ASTM D3125-06(2012) | 60 mg/kg | 50 | 60 |
| Purity by GC | ASTM D3362-05 (Withdrawn 2011) | 99.58%(m/m) | 99.5 | - |
Specification
| Analytical Test | Test Method | Min | Max | Result | Units |
|---|---|---|---|---|---|
| Appearance | Visual Appearance | Clear Colourless & Free from Particulate matter |
Visual | Clear Colourless & Free from Particulate matter |
- |
| Platinum Cobalt Color | ASTM D 1686 | - | 5 | <5 | - |
| Water Content | ASTM D 1631 | - | 0.03 | 0.01 | wt% |
| Freeze point | ASTM D 1493 | 40.8 | 40.85 | ⁰C | |
| Total Carbonyl | ASTM E 411 | - | 12 | 5.4 | Ppmw |
| Hydroxyacetone | ASTM D 6142 | - | 3 | <2.0 | ppmw |
| Mesityl Oxide | ASTM D 6142 | - | 10 | <2 | Ppmw |
| Iron | INTERNAL METHOD | - | 0.5 | <0.10 | Ppmw |
| Phenol purity (Dry Basis) | ASTM D6142 | 99.9 | - | 99.99 | wt% |
Specification
| Property | Test Method | Unit | Spec | Result |
|---|---|---|---|---|
| Purity | GAS CHRO | WT% | >99.8 | 99.98 |
| Color | ASTM D1209 | APHA | < 5 | 2 |
| Wter | ASTM D1364 | WT % | < 0.05 | 0.0075 |
| SP.GR (20/4°C ) | ASTM D1298 | - | 0.785 ~ 0.787 | 0.786 |
| Acidity | ASTM D1613 | WT PPM | < 10 | 2 |
| KMNO4 | ASTM D1363 | MIN | > 30 | 40 |
| R.E ( Residue After Evaporation) | ASTM D1353 | WT PPM | < 15 | 3 |
Specification
| Properties | Specification | R e f e rence |
|---|---|---|
| Appearance | White briquettes OR molten | W-LTQ-266(reference STM-00473) |
| Purity, wt% | 99.5 Min. | W-LTQ-264(reference STM-01333) |
| Solidification point℃ | 52.5 Min. | W-LTQ-193(ASTM D-1493-67) |
| Stability to Heat Color APHA(90 min at 140℃) | 40 Max | W-LTQ-194ASTM-D-3364) |
| Color, APHA | 20 Max. | W-LTQ-194(ASTM-D-3366-74) |
| Iron content (ppm) | 5 Max.. | W-LTQ-191(AA) |
| Maleic Acid (wt%) | 0.3 Max. | W-LTQ-264(reference STM-01333) |
| Ash (%) | 0.01 Max. | W-LTQ-265 |
Specification
| Item | Required | Result | |
|---|---|---|---|
| Purity | 99.5MIN | 99.8 | 99.8 |
| Moisture | 0.1MAX | 0.07 | 0.07 |
| PH | 7.5-9.5 | 8.40 | 8.40 |
| Ash Content | 0.03MAX | 0.01 | 0.01 |
| Colority | 20MAX | 5 | 5 |
| Turbidity | 20MAX | 5 | 5 |
| Quantity | - | - | 22MT |
Specification
| Components | Unit | Specification | Test Method | FB126A TEST RESULT | Fb126C TEST RESULT |
|---|---|---|---|---|---|
| Sp. Gr(60/60⁰f) | -- |
0.860 – 0.875 | ASTM D-4052 | 0.8688 |
0.8685 |
| Non-Aromatics | WT.% | -- | GAS CHRO | 3.22 | 3.29 |
| Toluene | WT.% | -- | GAS CHRO | 0.06 | 0.06 |
| Ethylbenzene | WT.% | -- | GAS CHRO | 63.34 | 63.84 |
| P-Xylene | WT.% | -- | GAS CHRO | 7.89 | 7.86 |
| M-Xylene | WT.% | -- | GAS CHRO | 18.04 | 17.73 |
| O-Xylene | WT.% | -- | GAS CHRO | 7.07 | 6.9 |
| Color (pt-co) | -- | MAX. 20.0 | ASTM D-1209 | NO8 | NO9 |
| Acid Wash Color | -- | MAX. 6.0 | ASTM D-848 | NO5 | NO4+ |
| Distillation I.b.p. | ⁰C | MIN. 135⁰C | ASTM D-850 | 136.6 | 136.5 |
| Distillation, D.P | ⁰C | MAX. 145⁰C | ASTM D-850 | 138.8 | 138.9 |
| H2S & SO2 | -- | -- | ASTM D-853 | Negative | Negative |
