Our Products
Tensile Testing Machine
2 Products availableTesting Equipment
1 Products availableIndustrial Furnace
1 Products availablePressing Machine
1 Products availableCompression Testers
1 Products availableLab Incubator
1 Products availableCoating Machine
1 Products available
Device Description : The metering bar coater is a table top instrument with a quick clamping unit for the sample . the coating materials (like a piece of paper and board) lies on a rubber – melinex surface . A metering bar is clamped into a clamp system and the coating colour is put on front of the bar . the motor moves the bar with a predefined speed over the coating material and stops when the end is reached . the bar is lifted off the coated samples and motor moves the system back to start position.
Test Description : The sample us clampled on the coater . A metering bar is slected and put into the bar holder . the bar is at starting position. The coating colour is poured onto the coated materials in front of the bar . the motor starts and the coated colour is evenly distributed on the sample . the coating thickness can be between 4um and 120um and is reached by selecting the special metering bar.
MorFi Neo is a brand new edition of MorFi Compact. Equiped with the latest camera technology, and utilizing an enhanced resolution for the best image treatment. It is designed for day to day production control, routine laboratory tests, and also for R&D purposes. With the new resolution, we are able to measure the Microfibrillation more precisely. MorFi Neo can be also a good tool to monitor first steps of the nano fibers production during refining. The interface gives a complete display of the treated data and makes it possible to recalculate this data to highlight different features. The data can be saved and exported to other computer programs.
MorFi Neo is able
to detect:
- Fibers
- Fines
- Shives
- Vessels
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T
Packaging Details : wooden packing
Delivery Time : 4 weeks
Definition : This method is used to measure the absorbency rate of paper for printing inks having an oil vehicle. It
is normally used only for easily permeable papers such as news, book, and mimeograph ; however, it can be helpful for any paper where the absorbency of an oil based vehicle is important.
Device Description : The instrument chamber has an orifice for holding the liquid medium and a clamping device for holding the material. The penetration timer stops automatically after releasing the sample holder. Double processed castor oil having viscosity of 700 ± 30 centipoises at 250 C or mineral oils of the same viscosity and comparable wetting characteristics are used.
Test Description : A correlation has been established between the results of this test and the printing quality of uncoated papers. The oil absorbency of paper is related to the porosity and internal structure of the paper.
Device Description : For pressing and dewatering of the hand sheet quickly made on standard
sheet making apparatus must be pressed in uniform manner for the distribution of pulp across the
area.
The press top made of duralumin for rigidity and lightness is secured by 4 rapid action clamping
and release nuts.
Control panel houses two timers one of 12 min and other of 6 min push button switches and
pressure gauge.
Precision air pressure and air flow regulators are housed in the cabinet.
A fail safe pressure relief valve is fitted to the air storage chamber, which functions
automatically if the inlet supply pressure exceeds the maximum.
Press platens are of stainless steel.
Centering template made of aluminum is supplied to adjust the location of sample sheets
Multi-number samples can be placed simultaneously for pressing. Working pressure 7 Kg/cm2
Test Description : The Sheet Press is operated pneumatically by compressed air supply. The specimen is pressed by gradually raising the rubber diaphragm with compressed air, pushing up the floating square flat press platen with larger area and higher load capacity. The solid state timers provide the timing sequence for dewatering time.
Definition: A property of paper referring to the degree to which a paper can maintain its surface and structural integrity under prolonged rubbing, scratching, and scuffing The term abrasion resistance also refers to a printing ink's ability to resist scuffing and scratching with increased handling, an important consideration in the printing of packaging and other materials destined to be subjected to abrasive forces.
Standardization : DIN 53754 , DIN 68861-2 , DIN 52347, DIN 53109 , TAPPI T476 u.v.m
Device description : The abrasion tester is a robust instrument suitable for table top use . the accurate control and driving elements are contained in study aluminum housing with durable baked wrinkle enamel finish . The operating data , such as number of test cycles and vacuum rate , are entered by way of control panel with keyboard . A digital display shows reading of the either current abrasion cycles rate (wear index) or the remaining number of abrasion cycles. By using the abrasion tester , two abrasion sets with different specified parameters can be conducted simultaneously , yet remaining independent of each other . the instrument enables abrasion testing on paint and other coatings , such as paper , leather , ceramics , textile surface structures and metals . the equipment is suitable for use in research and development for in-process and quality assurance controls
Test Description: Abrasion resistance is measured in a laboratory by rotating a paper sample under abrasive wheels for a set length of time, and then measuring the sample's change in weight. Wet or dry abrasion resistance tests can be performed. The wearing action is caused by two abrasive wheels , which are applied at a defined pressure to material sample , which has been mounted on a rotating specimen holder . abrasion resistance can be established by various testing methods (weight loss method , visual end point method , depth of wear method etc.)
Usage: The Laboratory Muffle Furnace units are utilized in general purpose heating in laboratories, ashing tests on wool, rubber, fibers or fabrics, heat treatment requirements for gears and various research facilities in chemistry and physics.
Device Description : Standard Single wall construction, body made of high grade mild steel sheet OR stainless steel (optional). Duly painted with rust proof paint. The gap between the Block and the Outer Body will be filled by high grade Blanket to avoid thermal loss. Heating elements are placed in each sides made of Super kanthal Aone wire (best quality wire in India).Temperature range +5oC ambient to 1200oC controlled by digital temperature controller cum indicator. To Work On 220/230VAC.
Definition : Thickness or caliper of paper, paperboard, or combined board as measured by this method is
defined as the perpendicular distance between the two principal surfaces of the paper or paperboard
under prescribed conditions, as measured between hard metal platens.
Standardization : ISO 534, EN 20534 , SCAN P7 , TAPPI T 411 .
Device Description : Measuring Spindle with constant lowering speed (1mm/sec) , Hardened and lapped
measuring face . Provided with dial type indicator.
Test Description : A C frame structure having two parallel plane circular faces fitted with high precision distance
measuring display , a piece of sample placed between these faces under constant load and specified speed is
measured .
Device Description : This sturdy machine is easy to operate due to its PC based Software operation. Its software has many pre-installed tests like standard 100 mm tensile test for 15mm stripes or 50mm stripes for tissue. It comes with one load cell of 25 kgs , 50 kgs . The pneumatically driven clamps have sample detection and then can be started manually by a start button. This is useful if transparent samples are to be tested.The maximum distance between the clamps is 300mm . Windows based panel PC gives the dynamic versatility to operate seamlessly almost anywhere either in a laboratory or machine shops . the test speed is adjustable as per user convenience
Description : the user places the strips and the clamps are closed automatically . By pressing the start button the sample is stretched until there is break in the sample. The figures, curves, statistics with max, min, mean as well as the standard deviation are shown on the PC software screen and can be printed simultaneously. After the test theclamps move to their original position for next sample and so on . The software comes with the preinstalled tests as they are described in the standards. Company specific tests can be set as well. All the parameters like testing speed, testing length, breaking and preload levels can be adjusted individually
Device Description : this high quality product is characterized by simplicity of the operation. Only premium stainless steel and aluminum parts are used to manufacture this instrument . the balanced hinged head allows the operator to open the device with only one hand. On the front side of the device there is start and stop button with an adjustable revolution counter , hence is the possibility of exact amount of revolutions needed to disintegrate the pulp.
Test Description : the disintegration pot needs to be filled with water and required amount of pulp. Now the pot can be placed on the disintegrator and the balanced hinged head can be moved down until it catches. preset the amount of revolutions needed for disintegration. After pressing the start button the device will disintegrate the pulp until full amount of revolutions has been accomplished and stops automatically. now the device can be opened and retrieved samples can be taken for further processing.
Reliable and accurate low temperature incubator for BOD test. The outer cabinet is made of stainless steel sheet fabrications and inner chamber of aluminum sheet. Double walled heavily insulated with transparent Perspex's inner door to ensure the constant temp inside
Device Description: This sturdy machine is easy to operate due to its on screen LCD and the clear control buttons. Its software has many pre-installed tests like standard 100 mm tensile test for 15mm stripes. It comes with one load cell of 500 N Load. The pneumatically driven clamps are optional, as standard delivery the machine comes with hand operated clamps. Separate Start, Stop button for easy use .The maximum distance between the clamps is 300mm. On the panel is provided a USB connection for easy PC transfer of test data and export in excel format. The test speed is adjustable between 0.1 to 700 mm/minute.
Test Description: the user places the strips and the clamps are closed manually. By pressing the start button the sample is stretched until there is break in the sample. The figures, curves, statistics with max, min, mean as well as the standard deviation are shown on the PC software screen and can be printed simultaneously . After the test the clamps move to their original position for next sample and so on . The software comes with the preinstalled tests as they are described in the standards. Company specific tests can be set as well. All the parameters like testing speed, testing length, breaking and preload levels can be adjusted individually.
The stainless steel Rapid Sheet Dryer is designed for shortening the drying time of wet pulp sheet or paper samples to determining the dry weight or moisture content.
A wet sample is placed between the cover and the heated surface to dry , the temp of the dryer plate is adjustable through thermostat to control the drying condition , after prescribed time the sample can be weighted to determine its moisture contents Square Drying Plates.
Lower plate is lined with wire cloth to lead off the vapour during the drying process.
Provided with over heating protector, Switch provided with indicator lamp.
Upper and lower drying plates are heated with flat electrical elements.
Mr. Amit Sharma (Saharanpur Testing Instruments Pvt Ltd)
Plot No 42-44, Sriram Vatika Industrial Area, Behind V Bros Hospital, Delhi Road, Saharanpur, Uttar Pradesh - 247001
Share us via
GST : 09AAQCS9142J1ZM
